|
| 1 | Wiring for light point/fan point/exhaust fan point/call bell point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( As per DJB SOR (E&M 2022), 31.10.2) Group B |
| 2 | Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2X2.5sq.mm+1 X2.5sq.mm earth wire. ( As per DJB SOR (E&M 2022), 31.14.2) |
| 3 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. ( As per DJB SOR (E&M 2022), 31.14.3) |
| 4 | Supplying and fixing following modular witch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch. ( As per DJB SOR (E&M 2022), 31.24.1) |
| 5 | 15/16 A switch. ( As per DJB SOR (E&M 2022), 31.24.3) |
| 6 | 3 pin 5/6 A socket outlet. ( As per DJB SOR (E&M 2022), 31.24.4) |
| 7 | 6 pin 15/16 A socket outlet. ( As per DJB SOR (E&M 2022), 31.24.5) |
| 8 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module(100mmX75mm). ( As per DJB SOR (E&M 2022), 31.28.2) |
| 9 | 6 Module (200mmX150mm). ( As per DJB SOR (E&M 2022),31.28.6) |
| 10 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, inter connections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door ( As per DJB SOR (E&M 2022), 32.4.2) |
| 11 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. ( As per DJB SOR (E&M 2022), 32.10.1) |
| 12 | Supply, 1.1 kV grade, XLPE insulated, stranded Aluminum conductor, galvanized steel flat strip / round wire armored, extruded PVC type ST2 sheathed, conforming to IS:7098 (Part-1) & IEC:60502 (Part-1) of following sizes: 4 Core x 50 Sq.mm (Price list) |
| 13 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and up to 95 sq. mm( As per DJB SOR( E&M 2022), 37.1.2) |
| 14 | 160 amps. TPN, switch disconnecter fuse unit (Panel mounted type) with ISI marked HRC fuses ( As per DJB SOR (E&M 2022) 43.6.5 |
| 15 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DJB SOR- 31.25 |
| 16 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.(SOR DJB- 31.44) |
| 17 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. A) Up to 450 mm sweep (SOR DJB 31.50.1) |
| 18 | S/o 20 Watt Higher Wattage Decorative ultra slim Polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack. ( As per DJB SOR (E&M 2022), 19.2.1) |
| 19 | LED decorative diffuser 2x2 panel light. FLAT 2X2PLR 36/40W. Havells / Orient / Bajaj / Phillips / CG & other Reputed OEM Make. (SOR DJB 19.9.2) |
| 20 | S/o 25 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07. ( As per DJB SOR (E&M-2022), 19.10.3) Armoured Cable |
| 21 | Ceiling fan 1050/ 1200 mm. Make:- Havells/ CG / Orient/ Usha/Almonard& other reputed OEM Makes (SOR DJB 20.1.2) |
| 22 | Heavy Duty Exhaust Fans (900/1440RPM) 450 mm. Make:- Havells/ CG / Orient/ Usha/ Almonard & other reputed OEM Makes (SOR DJB 20.2.3) |
| 23 | Heavy Duty Exhaust Fans (900/1440RPM) 300 mm. Make:- Havells/ CG / Orient/ Usha/ Almonard & other reputed OEM Makes. (SOR DJB 20.2.1) |
| 24 | Wall Fans, 400 mm. Make:- Havells/ CG/ Orient / Usha/Almonard& other reputed OEM Makes. (SOR DJB 20.4.1) |
| 25 | Job for cutting the wall 12 \\" as per size of above exhaust fans. As per site requirement. With the help of manual labour and power hammer etc. and required civil work for surface as per size. Please Enable Macros to View BoQ information |
