|
| 1 | Supplying Jhaw/Eucalyptus bullah piles at work site,including dressing and making one end pointed. |
| 2 | 20 cm av. Diameter |
| 3 | 17.5 cm av. Diameter |
| 4 | Labour for driving Jhaw/Eucalyptus bullah piles by monkey in all sorts of soil including hoisting and placing piles inposition,protecting the pile head with iron ring and cutting and shaping heads before and after driving and including hire and labour for necessary driving appliances and all tackles. |
| 5 | 20 cm av. Diameter |
| 6 | 17.5 cm av. Diameter |
| 7 | Best Seasoned wood work in shutters, posts, plates, rafters, battens, trusses, beams, purlins, bargas, wheel-guards, running boards, frames etc. including supplying at site, handling, hoisting, fitting & fixing in position excluding the cost of bolt and nuts only but including the cost of nails and screws with cost and carriage of all materials complete as per the direction of the Engineer-in- charge. |
| 8 | Hard Wood (Mahua/Arjun/Tentul etc or similarquality hard wood as approved by the Engineer-in-charge) |
| 9 | Supplying, fitting and fixing with iron nails half split bullah wailing pieces and cross pieces etc. complete with cost of all materials and carriage to site. |
| 10 | Width of thinner end above 15 cm. |
| 11 | Jhaw / Eucalyptus. |
| 12 | Coaltarring with 5% pitch including cost of material and labour complete as per direction of the Engineer-in-charge |
| 13 | Two coats. |
| 14 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-in-charge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. |
| 15 | For stuctural member of specified section less than 22.50 kg/ Mtr. |
| 16 | Painting on steel or other metal surface with any approved bituminous anticorrosive paint after preparing the surface including removing paints, cleaning, smoothening etc. including scaffolding where necessary including cost of all materials complete. |
| 17 | Two Coat |
| 18 | Supplying to site empty cement polythene bags(capacity50kg)in good condition including stacking, incedental charges etc. all complete(capacity 50 kg). |
| 19 | Labour charges for filling empty cement gunny bag/polythene bag (capacity50kg)with all kinds of earth (wetordry), sand or agreegates (stone/ brick)and sewing as done incase of cement bags, (tying with aknot after filling will not be accepted), and stacking within a lead of 30metre as perdirection of Engr-in-charge(cost is excluding the cost of any types of filling materials).NB:-Volume of earth/sand filled bags should not be less than 0.028cum/ bag. |
| 20 | Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 21 | Earthwork in excavation in all kinds of soil for making embankments,repairs to the embankment, closing breaches etc. as per profile includingsupply and transporting theearthby truck or tractor or any othermechanical means on land , including loading, transporting, unloadingand stacking with all lifts bothways and head load wherenecessary anddepositing the same on embankments, clannels, filling depressions inrequisite profile, levelling as per direction of the Engineer-in-charge withina leadof,NB :- Measurement to be taken on the basis of stack measurement / prepostwork section measurement after deduction of void as per norms. Noextra payment will be made for stacking.A) Beyond 500 metre and upto 1.00 km Please Enable Macros to View BoQ information |
