|
| 1 | Chipping of RCC/Stone masonary walls/ plastering surfaces deep average 10mm width in base with in all leads aand lifts as per the direction of the Engineer in Charge. |
| 2 | Repair in patch work with 15 mm cement plaster in 1:4 (1 Cement: 4 Sand) single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arries, internal rounded angles, chamfers and rounded angles not exceeding 80mm in grith and finished even and smooth in cement mortar 1:4 (1 Cement: 4 Sand) including all leads and lifts and carriage of material at site and as per the direction and entire |
| 3 | Cement concrete flooring 1:2:4 (cement: 2 Sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat cement 50mm thick with in all leads and lifts as per the direction of the Engineer Incharge. |
| 4 | Providing & fixing panelled glazed or panelled & glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws in 2nd class deodar wood (40 mm thick) |
| 5 | Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge |
| 6 | Providing and laying cement concrete 1:2:4 (cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation and Plinth with in all leads and lifts as per the direction of the Engineer in Charge. |
| 7 | 15 mm thick cement plaster in single coat on fair sides of brick/concrete/ stone walls for interior plastering upto floor two level including arises internal rounded angles not exceeding 80mm girth and finished even smooth in cm 1:3 (cement: 3sand) within all leads and lifts and as directed by the Engineer-in-charge. |
| 8 | 6 mm thick cement plaster in ceiling in cm 1:3 (cement: 3sand) within all leads and lifts and as directed by the Engineer-in-charge. |
| 9 | Excavation in foundations, trenches etc., in earth work, lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers, when required in to plinth and sides of foundations etc., consolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs.Pick and Jumper work etc. complete as per the direction of the Engineer - in- Charge. |
| 10 | Providing and laying cement concrete 1:3:6 (cement: 3 sand: 6 graded stone aggregate 40mm (Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge. |
| 11 | Hirmachi color wash on undecorated wall surface (two coat) give an even shade i/c throughly brooming the surface to remove all dirt, mortar drops and othe foreign matter with in all leads and lifts as per the directions of the Engineer in charge. |
| 12 | Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repair to scratches complate. |
| 13 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade for interior painting on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface to remove all dirt, dust and other foreign matter etc. on interior walls of Plant buildings of STP Zone 2 and Zone 3 complete in all respect as per direction of Engineer-in-Charge with in all leads and lifts. |
| 14 | Painting two coats (excluding priming coat) of approved make on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt,dust and other foreign matter complete in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. With readymixed paint other than white. |
| 15 | Supplying and fixing wovenplains G I fencing of mesh 25 x 25mm to any type of standard rails,strainging boets, etc.ic provision of binding wire.staples etc. |
| 16 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 17 | Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 18 | Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required. |
| 19 | S.P. 5/ 6 Amps one way switch, piano type |
| 20 | S.P. 15/16 Amps one way switch, porcelain base/ piano type. |
| 21 | Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. |
| 22 | 5 pin, 5/ 6 Amps Modular socket outlet |
| 23 | 6 pin, 15/16 Amps Modular socket outlet |
| 24 | Providing and fixing LED street light 230 Volts 50 Watts to the entire satisfaction of the Engineer-in-Charge. |
| 25 | Providing and fixing of following sizes of PVC casing and capping on surface as required:- |
| 26 | 20 mmx 12 mm |
| 27 | Providing & Laying cement concrete 1:6:12(1ccement :6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with in all leads and lifts as per the directions of the Engineer in charge. |
| 28 | Providing andf laying cement concrete 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nominal size ) with 15% plum concrete and curing complete excluding cost of form work in retaining walls/breast walls,the size of plums shall usually be 150 mm to 300 mm as per H.P.P.W.D Specification. |
| 29 | Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge. |
| 30 | Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttress, plinth and string couress and the like with in all leads aand lifts as per the direction of the Engineer in Charge. |
| 31 | Boulder filling behind R/wall & B/wall within all leads and lifts and as directed by the Engineer-in-charge. Please Enable Macros to View BoQ information |
