Tender For Restoration Of Rain Damages Of Lwss/Gwss Saraswati Nagar In G.P Sawratehsil Jubbal Distt. Shimla (Hp). Sub Head:- Desmantelling & Relaying Of G.I. Pipes Of Various Diameter, Providing And Laying Of New Pipes Of Various Diameter, Providing, Shimla-Himachal Pradesh
TDR : 54412522
Tender Notice
BOQ
10 Days Left
Shimla
Himachal Pradesh
Tender For Restoration Of Rain Damages Of Lwss/Gwss Saraswati Nagar In G.P Sawratehsil Jubbal Distt. Shimla (Hp). Sub Head:- Desmantelling & Relaying Of G.I. Pipes Of Various Diameter, Providing And Laying Of New Pipes Of Various Diameter, Providing
Name of Work:- Restoration of rain damages of LWSS/GWSS Saraswati Nagar in G.P SawraTehsil Jubbal distt. Shimla (HP). Sub Head:- Desmantelling & relaying of G.I. Pipes of various diameter, providing and laying of new pipes of various diameter, providing and fixing of G.I pipe fittings for making water distribution junction.) Estimated Cost :-5,17,223/- Earnest Money Rs:-10,400/- Time:- 1 Month
Sl. No.
Item Description
1
Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing or pumping out water,blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring/strutting, planking,timbering & dewatering wherever required, stacking the usable & unusable material/soil separaterly & after laying, jointing & testing of pipes, returning the useable soil in trenches in 15 Cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer - in - charge.
2
Dismentalling of G.l pipes (light class) in trenches of following diameters including smooth bending by necessary bends or through pipe bending mchine complete as per directions of Engineer - in - charge.
3
25mm Dia
4
32mm Dia
5
40mm Dia
6
Relaying in trenches dismentalled GMS tube tube fitting and jointing complete (earth work in trenches to be measured and paid for separately) and asper thedirection of the Engineer-in-charge.
7
25mm Dia
8
32mm Dia
9
40mm Dia
10
Laying , jointing and testing in trenches Galvanised Mild Steel tube of the following dia metres including smooth bending by necessary bends, or through pipe bending machine with necessary all pipe fittings such as Tees, Elbows, Union & Reducers etc. of ISI marked & testing for leakage complete with in all leads & lifts as per entire satisfication of Engineer - in - charge. (Earth work in trenches to be measured and paid for separately)
11
25.mm dia
12
32mm dia
13
Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately).
14
40mm dia
15
65mm dia
16
Providing and replacing of G.I union (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
17
25mm Dia
18
32mm dia
19
40mm dia
20
50mm dia
21
Providing and replacing of G.I nipples (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
22
25mm Dia
23
32mm dia
24
40mm dia
25
50mm dia
26
Providing and replacing of G.l elbows (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
27
25mm Dia
28
32mm dia
29
40mm dia
30
50mm dia
31
Providing and replacing of G.I Tees (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge.
32
25mm Dia
33
32mm dia
34
40mm dia
35
50mm dia
36
Providing and replacing of copper alloy gate valves (Heavy Duty) ISI marked with in all leads and lifts as per direction of Engineer-in-Charge
37
25mm Dia
38
32mm dia
39
40mm dia
40
50mm dia Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
