|
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed by Engineer-incharge and disposing of all excavated earth at dumping site ( To be arranged by the Contractor) as per satisfacation of Engineer -in- Charge through all modes of transportation including head load , animal load or mechnical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechnical means and labour( If required). All useful material such as stone , shingles aggregate and slates Shall be properly Stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation as per direction of the Engineer -in -charge . Any loss to the public and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in – situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 3 | Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 4 | Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 5 | Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Beams, cantilevers, girders and lintels, sides of soffits of beams, beams haunchings, girders, cantilevers, bressumers and lintels upto any depth /heights upto all floor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 6 | Providing and laying cement concrete 1:4:8 (One cement: Four sand :Eight graded cursed/broken stone aggregate 40mm) (forty millimeters nominal size) mechanically mixed and curing complete, excluding cost of form work in foundation and plinth including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 7 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works upto plinth level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all works above plinth level upto floor V level complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 9 | Providing and laying Tor steel reinforcement of TATA, sail , Rashtriya Ispat or its substantial equivalent make for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals due for its completion up to all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. |
| 10 | Brick work using Second class common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels in cement mortar 1:6(One cement isto Six sand) as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. |
| 11 | Providing and laying second classs half brick masonry in common burnt clay building bricks in super structure above plinth level in all floors up to all heights and levels Cement Mortar 1:4 (One cement: Four sand) including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge. |
| 12 | Stone soling properely hand packed filling interstics with spalls and consolidating with manually roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour). including carriage of materials in all leads and lifts. |
| 13 | Providing and fixing angle iron doors frames (single Rebate) manufectured from MS angle section of 35x35x4mm and MS Flat 50x5mm as perdesign and Drawing including Jambs, LockJambs beeds if required angls threshold of MS angle 50x5mm welded or ridigly fixed by mechinical means lugs with spilt endstails to each Jambs including steel butt hinges 2.5mm thickwith a provision of locking arrangements and shockabsorvres as specified and a applying coat of approved steel primer after per- Treatment of the surface as directed by the Engineer- in- Charge. |
| 14 | Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour). including carriage of materials in all leads and lifts. |
| 15 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1cement: 3 sand: 6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings, including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per HP.PWD specification. 100mm spread thickness (finished work including materials and labour). including carriage of materials in all leads and lifts. |
| 16 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.a) 250x16mm |
| 17 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.a) 200x10mm |
| 18 | Providing and fixing aluminium handles 100 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.complete : |
| 19 | Providing and laying Duro stone vetrified tiles (300x300mmx10mm(three hundred into three hundred into ten milimeter) in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12mm(twelve milimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. The size shown in inicative and Engineer-in-charge decision /approval will be final. |
| 20 | Providing and laying Vitrified tiles (300x450) mm in (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. The size shown in inicative and Engineer-in-charge decision /approval will be final. |
| 21 | 6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government. |
| 22 | 15 (Fifteen) millimeters thick cement plaster in single coat on the rough side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:4(One cement: Four sand) as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 23 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 24 | Structural steel work riveted, bolted or welded in built up sections/hollow sections etc., trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works:- as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 25 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 26 | Applying priming coat on new concrete/masonry/asbestos cement/plaster surfaces after and including preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter, sand papering as required with ready mix primer upto all lead and lifts. |
| 27 | Painting two coats (excluding priming costs) on new concrete/masonry/plaster surfaces with ready mixed paint brusging for use on floors to give an even shades including cleaning the surface of all dirt dust and other foreign matter and sand papering as required with paint other than white as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. |
| 28 | Painting two coats (excluding priming coat on new steel and other metal surfaces with enamel paint white brushing to give an even shade including cleaning the surface of all dirt,dust and other foregin matter paint complete as per HP.PWD., Specifications of 1990 volume-I includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 29 | Providing and fixing to wall ceiling and floors CPVC pipe 20 mm nominal bore (medium grade) tube fitting and clamps including making good the wall ceiling and floors ISI marked per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 30 | Providing and fixing various capacity.store well branded ISI marked Polythene water tank with 40 (Forty) millimetre nominal size bore galvanized Mild Steel scour tube with fitting 25 (Twenty Five) millimetre nominal bore galvanized Mild Steel overflow tube with fittings and mosquito proof coupling of approved municipal design 15 (Fifteen) millimetre nominal size ball valve and mosquito proof PVC cover with locking arrangement including providing pads of size as required for inlet and outlet tube complete ISI marked per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 1000 litres net capacity tank |
| 31 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 32 | Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . (a) 75 (seventy five millimetres nominal size. |
| 33 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . (a) 110 (One hundred ten) millimetres nominal size. |
| 34 | Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 ( Seventy fifty) millimetres nominal size. |
| 35 | Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors: per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110x 90 mm(one hundred ten into ninety) milimeter. |
| 36 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 (One hundred ten) millimetres nominal size. |
| 37 | Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 (Seventy five) millimetres nominal size. |
| 38 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 mm dia |
| 39 | Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 mm dia |
| 40 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 mm dia |
| 41 | Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 mm dia |
| 42 | Providing and fixing PVC plain band ISI marked including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 mm dia |
| 43 | Providing and fixing PVC plain band ISI marked including fixing with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 mm dia |
| 44 | Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 mm dia |
| 45 | Providing and fixing PVC cowl including carriage of materials per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 110 mm dia |
| 46 | Providing and fixing PVC cowl including carriage of materials per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 75 mm dia |
| 47 | Providing and fixing viterous China water closet squatting pan (Indian Type W.C. pan) size 580mm (Earth work, bed concrete, foot rest and traps to be measured and paid for separately per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) Orrissa pattern long pattern |
| 48 | Providing and fixing viterous China wash, down water closet (European Type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and coveto be paid for separately. per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) Anglo Indian of Hindware or its equivalent |
| 49 | Providing and fixing 10.00 ltr.capacity PVC low level duel flushing cistern CERA catlogue No. 2603 or equivalenet with a pair of brackets with fittings such as lead valve, less syphon, 15mm nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately) per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 50 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. brass hinges and rubber buffers per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (i) Solid Type :- (a) White plastic seat and cover :- |
| 51 | Providing and fixing first quality of white shade viterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately) per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) Flat back type (430mm x 260mmx 350mm)of hindware |
| 52 | Providing and fixing C.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same. per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 15 mm nominal bore. |
| 53 | Providing and fixing division plate for urinal of white shade Hind ware Cera or its equivalent 600*300 (Six hundred into Three hundred) millimeter’s size for urinal, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. |
| 54 | Providing and fixing viterous China wash basin of Hindware Cat No. 10001 or equivalent with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (i) Flat back :-(a) 550 X 400 mm |
| 55 | Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-(a) 32 mm dia |
| 56 | Providing and fixing MI union for wash basin or sink as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government (a) 32 mm dia |
| 57 | P/F 32 mm dia lead waste pipe for wash basin as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 58 | Providing & fixing 100mm dia C.P. grating for floor or nahani/gully/floor trap as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 59 | Providing and fixing 600mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washeras per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 60 | Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 61 | Providing and fixing CP brass bib tap (heavy duty ISI marked IS:8931 & 8934) of jaquar with capstan head as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-15 mm dia |
| 62 | Providing and fixing CP brass pillar tap of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-15 mm dia |
| 63 | Providing and fixing C.P.brass angle valve of jaquar (heavy duty ISI marked IS:8931 & 8934)as per HP.PWD., Specifications including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-15 mm dia |
| 64 | Providing and fixing PVC connection pipe (heavy duty ISI marked IS:8931 & 8934) with brass union as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-45 cm length --15 mm dia |
| 65 | Providing and fixing brass full way valve with wheel as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government :-20 mm nominal bore |
| 66 | Providing and fixing 8 mm dia C.P. / PTMT. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved/ directed by the Engineer-in-Charge as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government |
| 67 | Constructing manhole with R.C.C. top slab in 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 ( icement ; 4 sand : 8 graded stone aggregate 40 mm nomonal size), inside plastering 15mm thick with cement mortar 1:3 (1 cement : 3 sand) and finished with floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads lifts and all incidental charges.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. a) Inside size 800mm x800mm and 500 mm deep including man hole cover size 500mm x 650mm x 62.5 mm of precast reinforced cement concrete 1:1.5:3 (one cement :1.5 Sand :3 crushed stone aggregate 20mm nominal size) complete with 200mm thick walls of brick masonary using common burnt building bricks in cement mortar 1:3 (1 cement : 3 sand). |
| 68 | Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 69 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing asrequired..2x1.5 Sq. mm |
| 70 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-Exhaust Fan, Light duty, (Domestic) 300 mm sweep |
| 71 | Providing and installation of following type of ultra slim decorative LED batten with extruded aluminium heat sink, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.Led tube 20 watt |
| 72 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-Double door-8 way |
| 73 | Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Double pole. Cat-A. |
| 74 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-Single pole. Cat-A. |
| 75 | Supplying and laying Service wire 10mm.as directed by Engineering Charge Please Enable Macros to View BoQ information |
