|
| 1 | Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. In ground floor including roof. |
| 2 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m.In ground floor including roof. (a) upto 150 mm. thick |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced,stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof. |
| 4 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 5 | Filling in foundation or plinth by Fine Sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity) |
| 6 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 7 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety] 1:3:6 proportion |
| 8 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor). (b) 25 mm. to 30 mm. thick wooden shuttering without staging in foundation. |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in G.Floor. |
| 10 | Brick work with 1st class bricks in cement mortar (6:1) In foundation and plinth |
| 11 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches |
| 12 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 13 | Supplying, fitting and fixing towel rail with two brackets. (a) C.P. over brass (ii) 25 mm dia. and 600 mm long |
| 14 | Labour for boring through any type of soil for sinking tube well ofrequired dia. with top enlargement by rig boring system (either by reserve circulation or by direct rotary method) including hire charges and labour for rig machine, tools and plants, staging, force pumping set and making arrangement for water required for boring etc. complete and lowering of pipes, strainers, blind pipes etc. complete.(a)(a) For depth upto 250 metre for 100 mm dia. Tube well with top enlargement of 200 mm dia.(upto 50 metre). First 50 metre |
| 15 | Next 50 metre |
| 16 | Next 50 metre |
| 17 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.100 mm dia |
| 18 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.Note: Initial 6 m. of Annular space between the housing pipe and the bore should not be shrouded with Pea size gravel to avoid contamination with surface water. |
| 19 | Supplying, fitting and fixing heavy type bell mouth reducing socket. (iii) 100 mm X 150 mm |
| 20 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets. (ii) 50 mm dia |
| 21 | Supplying, fitting and fixing G.I. cap at top (iii) 200 mm |
| 22 | Supplying, fitting and fixing M.S socket ring (i) 100 mm |
| 23 | Supplying, fittng and fixing 300 mm M.S. housing clamp of approved quality. |
| 24 | Welding in M.S. structural work with gas or electric: b) Continuous weld |
| 25 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work, PVC Pipes. 200 mm dia |
| 26 | 100 mm dia |
| 27 | 40 mm dia |
| 28 | 32 mm dia |
| 29 | 25 mm dia |
| 30 | 20 mm dia |
| 31 | (Q) Ball Valve 40 mm |
| 32 | 32 mm dia |
| 33 | 25 mm dia |
| 34 | 20 mm dia |
| 35 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only) 40 mm dia |
| 36 | 32 mm dia |
| 37 | 25 mm dia |
| 38 | 20 mm dia |
| 39 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 40 | Supply of I.S.I mark 4 Sq.mm Submerssible flat cable(Non schedule Item) (Rate as per PO No- 5100640575) |
| 41 | Supplying of 1.5 HP, single phase CROMPTON GREAVES Submerssible pump set (Non schedule Item) (Rate as per PO No- 5100640575) |
| 42 | Supplying of Crompton Greaves (1.5 HP,Single phase) Submerssible Control panel No.STC -02 (Electrical contractor & Relay Type with both start and Run Capacitors. (Non schedule Item) (Rate as per PO No- 5100640575) |
| 43 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 44 | Geophysical investigation of the acquifer by electrologging system with all tools and plants as necessary including supply of necessary report. |
| 45 | Supplying and affixing optically clear polyester sun control window film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM E84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer) (b) Superior Quality : Film Thickness - 2.0 Mil, Glare Reduction > 75%, U factor < 1.03, Emissivity < 0.70 |
| 46 | Glee 3str sofa Fab CrCb, HSN CODE - 94016100 LN Code- 56101502SD04592 |
| 47 | Ace Pro Din Set 4Str Wood Dark, HSN CODE - 94016100 LN Code- 56101543SD00226 |
| 48 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (a) With 6:1 cement mortar 20 mm. thick plaster |
| 49 | 15 mm. thick plaster |
| 50 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. NOTE : Cement 0.152 cu.m. per 100 sq.m. Please Enable Macros to View BoQ information |
