|
| 1 | Dismantling of damaged burnt components, wiring etc,, damaged & missing components complete with wiring, damage sleeve, nut bolt ,tapping, thimbling etc. terminal block, PVC spiral cover and PVC channel cove on wiring of Main LT Panel and clean the complete panel and making by pass arrangement for regular smooth supply. |
| 2 | S/o MCCB 630 amp TP with spreader terminal and extended handle suitable for motor protection. Make: HPL// Havells/L&T/Schneider/Any DJB approved make. |
| 3 | S/o TP MCCB 125 Amp with spreader terminal Make: HPL/ Havells/L&T/ Schneider/Any DJB approved make. |
| 4 | S/o TP MCCB 250 Amp with spreader terminal Make: HPL/ Havells/L&T/ Schneider/Any DJB approved make. |
| 5 | S/o TP MCCB 100 amp with spreader terminal Make: HPL/ Havells/L&T/ Schneider/Any DJB approved make. |
| 6 | S/o 50 A power contactor. Make : Havells/L&T/Schneider /HPL/Any DJB approved make. |
| 7 | S/o 70/80A Power contactor. Make : Havells/L&T/Schneider/HPL/Any DJB approved make. |
| 8 | S/o OFF load change over switch 400Amp 4pole with fuse unit. Make: HPL/Havells/L&T/Schneider/Bentex/Capital/Any DJB approved make. |
| 9 | S/o TP Main Switch 400Amp with fuse Unit. Make: HPL/ Havells/L&T/Schneider/Bentex/Capital/Any DJB approved make. |
| 10 | S/o Amp. Meter size 96 x 96mm |
| 11 | S/o Volt meter size 96 x 96mm |
| 12 | S/o Indicating lights- Make: L&T |
| 13 | S/o Ampere selector switch. Make : L&T |
| 14 | S/o Voltage selector switch. Make: L&T |
| 15 | S/o single core PVC insulated 50Sq mm copper cable. Make : Havells / Grandlay/Gloster/DJb approved make. |
| 16 | Insulation on bus bar of complete panel ,P&F of bus bar link ,bend duly sleeved with heat shrinkable PVC sleeve ,support insulator of bus bar & hard with hard wares of Main LT Panel. |
| 17 | Fixing of above material in place of damaged & missing components complete with internal wiring , tapping, thumbing etc, re-wiring of control by replacing terminal blocks , PVC spiral cover and PVC channel, cove on wiring & DOL Starter with connection from dewatering motor to starter by 6Sq.mm 3 core copper cable. |
| 18 | Testing & commissioning of panel & allied accessories as per required parameters with relevant IS. testing of the panel prior to switching on as follow (i) Continuity and earth testing. (ii) Meggaring of all equipment's for phase to phase, neutral to body, neutral to earth and phase to earth. (iii) checking for all tightness of nut and bolts. (iv) Alignments of doors etc. (v) Interlocking tests. (iv) All function tests. Testing on load with engineer in charge. Please Enable Macros to View BoQ information |
