|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: Executive Engineer(E) PWD M-253 Name of Work:- RMO E&M Services installed under Subdivision M2531 at Delhi Sachivalaya, New Delhi.(SH: SITC of different type of lights,fan and AC grills supply at delhi sachivalya building.) NIT No.:120/EE(E)/PWD M253/2025266 Estimated Cost:-21,19,496/- Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Sub Head Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt )Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range 50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (ficker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be Confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by EngineerinCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim18 watt |
| 3 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt, frequency 50/60 hz, Operating temp range 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM2111 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by EngineerinCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)Powder Coated CRCA Sheet Body (Thickness >0.50 mm) 36 watt |
| 4 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD63 mm & ID51 mm nominal) |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm |
| 6 | Supplying Installation Testing Commissioning of LaserJet printer having printing resolution 1200 x 1200 dpi, (dot/inch) or better, 21 to 30 ppm printing speed (LaserJet) complete etc. as required |
| 7 | Supplying, installation, testing and commissioning of decorative retrofit outdoor LED (1824 watt) bollard light fitting of height not less than 1 metre, fixture size 385*225 mm (nominal) with hexagonal lantern top, fluted ornamental post and square decorative base, fixture mounted on aluminium die cast column with cast alum base, made of pressure diecast aluminium with corrosionresistant powder coated finish with PC/PUMMA diffuser, silicon filled complete having duly primar and painted, suitable for operation on 230V AC, 50Hz supply i/c making cement concerete foundation and painting as per OEM standard with the help of foundation bolt complete with necessary internal wiring, earthing terminal, and all accessories required for proper installation and operation as per site requirement and direction of EngineerinCharge.(Note: 1824 W LED bulb included, CCT should be 4000°K ). |
| 8 | Supplying, Installation, Testing and Commissioning of Track light LED in black/white finsh of 10 W COB LED to provide focus light with made out of pressure die cast aluminium housing for effective thermal management. , System Efficiency atleast Minimum should be 90Lm/W, CCT 4000K/5700K/6500K, , suitable for operation on 230 V single phase AC supply with all accessories and connections as required, as per direction of EngineerIn charge. |
| 9 | Supplying, Installation, Testing and Commissioning of LED light Track of black/white finish atleast 1 mtr length with made out of pressure die cast aluminium housing with all accessories and connections as required, as per direction of Engineer-In charge. |
| 10 | Supply, installation, testing and commissioning of weather proof street light pole junction box, size atleast 140 x 140 x 95 (nominal) made of FR polycarbonate/ABS material, IP65 protection, with 1 No. 6A/10A SP MCB, 4way connector strip, and cable glands, suitable for outdoor use etc as required. |
| 11 | Supplying Installation, testing & commissioning of 400 mm sweep wall fan, 230V, 50hz, rated speed 1350 RPM on the existing surface and making good the damage, making connections, interconnections, earthing etc, as required. |
| 12 | Supplying Installation, testing & commissioning of 400 mm sweep pedestal fan, 230V, 50hz, rated speed 1350 RPM making connections, interconnections, earthing etc, as required. |
| 13 | Supplying,replacement, testing and commissioning of 36 to 40 watt surface/recess mounted 1x4 LED Luminaries housing made with white powder coated CRCA sheet metal and opal diffuser suitable for operation on 150 to 265V single phase A.C. supply, having system efficiency not less than 100 luman per watt. and colour temperature of 40006500 K, CRI >80 with APFC driver having power factor > 0.90, including connection with 1.5 sq. mm. PVC insulated copper conductor FRLS cable etc as per site requirement. |
| 14 | Supplying, installation, testing & commissioning of following capacity Air Cooler, plastic body with heavy duty exhaust fan, honeycomb pads, everlast pump, 3 speed control, Minimum 70 ltr capacity, water level indicator, oscillating swing control, castor wheels, works on inverter suitable for operation of 230 volts, 50Hz, single phase AC supply etc. complete as required. |
| 15 | SITC of RO Water Purifier having 810 ltr tank capacity and 20LPH filter capacity. Multiple Purification Stages – RO+UF+TDS Control + UV LED in the water tank for thorough purification. It should be wall mounting or free standing type and other necessary accessories as per site requirement. |
| 16 | Supply installation testing and commissioning of 55 inch LED TV, having 4K resolution , ULTRA HD, Smart LED having Wifi, USB ethernet connectivity , including making necessary connection as required. |
| 17 | Supplying, installation, testing and commissioning ofGI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to SMACNA/IS and as per specifications complete etc. as required |
| 18 | Supplying, Fixing, installation, testing and commissioning of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 19 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 20 | Supplying, Fixing, installation, testing and commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required |
| 21 | Supplying, Fixing, installation, testing and commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 22 | Dismental creditLed down lighter |
| 23 | Led panel lights 2x2 |
| 24 | Weather proof box |
| 25 | Wall fan |
| 26 | 1x4 Led lights |
| 27 | Cooler |
| 28 | Grill |
| 29 | Diffuser |
| 30 | Damper |
| 31 | RO water purifier |
| 32 | laser printer |
| 33 | 55 inch Led TV Total in Figures 2119496.0 8290.0 Twenty One Lakh Nineteen Thousand Four Hundred & Ninety Six Only Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
