|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil and then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering , etc.and disposing of surplus excavated soil as directed, within a lead of 50m - All kinds of soil -Pipes,cables etc, exceeding 80mm dia but not exceeding 300 mm dia. |
| 2 | Providing flanged joints to double flanged C.I / D.I. pipes and specials, including testing of joints -100mm diameter pipe. |
| 3 | Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1.4 (1 cement : 4 fine aggregate) for stop cock, with C.I.surface box 100x100x75 mm (inside) with hinged cover fixed in reinforced cement concrete slab 1:1.5:3 mix (1 cement : 1.5fine aggregate : 3 graded stone aggregate 20mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine aggregate : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 fine aggregate) 12mm thick, finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S (non modular) bricks of class designation 3.5 |
| 4 | Providing and fixing C.I. sluice valve (PN 1.6) (withhandwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia. |
| 5 | Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 150 mm dia. |
| 6 | Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 100 mm dia. |
| 7 | Providing, laying and jointing UPVC pipes (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 110mm dia. |
| 8 | Providing and fixing in position UPVC moulded equal Tee (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc., complete - 110mm dia. |
| 9 | Providing and fixing in position UPVC moulded plain coupler (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia. |
| 10 | Providing and fixing in position UPVC moulded tail piece without flange (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110mm dia. |
| 11 | Providing and fixing in position UPVC fabricated bend (0.6 Mpa)conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 mm dia. Please Enable Macros to View BoQ information |
