Tender For Construction Of Bus Stand At Bhota Tehsil Barsar, Distt. Hamirpur (H.P.) Sh:-Building Portion, Ws & Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. (Deposit Work) Estimated Cost:-Rs.83688801.00 Earnest Money:- Rs. 16,, Barsar-Himachal Pradesh

TDR : 54409715

Tender Notice
BOQ

Expired

Barsar , Himachal Pradesh

Tender Brief : Tender For Construction Of Bus Stand At Bhota Tehsil Barsar, Distt. Hamirpur (H.P.) Sh:-Building Portion, Ws & Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. (Deposit Work) Estimated Cost:-Rs.83688801.00 Earnest Money:- Rs. 16,

Document Fees
₹ 10000 /-

EMD
₹ 1673800.0 /-

Tender Value
₹ 8.36 Crore /-

Submission Date
09-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Cutting in earth work by mechanical means in all heights and depths in blasting work in hard rock with chiseling and wedging out of rock (where blasting work is prohibited) and their intermediate classification of soil including, dewatering wherever required, setting of the required lines, levels as shown on the drawing and directed by the Engineer-in-Charge at site, and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (to the arrange by the contractor) as per satisfaction of Engineer-in-Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools, equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful materials such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent. Any loss to the public and private property, human being machinery during the course of execution and disposal of serviceable and unserviceable material shall be the absolute responsibility of the contractor and shall have to be duly compensated by him all respect including all incidental charges. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
2	Earth work in Excavation in all kinds of soil ordinary rock and hard rock etcetra by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains in all length and width , including dressing of sides and ramming of bottoms, lift upto all height, including getting out the excavated soil and disposal of surplus excavated soil as directed, with in all leads and lifts in all kinds of soil complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
3	Filling with available excavted earth (exculding rock) in trenches, plinth, sides of foundation etctra in layer not exceding 20 cm (twenty centimeter) in depth consolidating each deposited layer by the ramming and watering complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
4	Providing boulder/stone filling hand packed under floors, complete including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.
5	Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :1:5:10 (one cement : Five coarse sand : ten graded stone aggregate) 40 mm (forty millimeter) nominal size. complete and as per drawings and technical specifications as per the direction of Engineer-in-Charge including entire carriage of material with with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
6	Back filling behind return wall,abutment wall, R/wall stone boulders of size range 5 cm to 20 cm (Five centimeter to twenty centimeter),in the required thickness, for all leads and lifts, all complete as per direction of Engineer-in-charge. complete upto all floor level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
7	Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm (one hundred millimeter) diameter PVC pipe extending through the full with of the structures with slop of 1 (v):20(H) (One Vertical : twenty Horizontal) towards drawing face complete as per drawing and technical specification clause 614, 709, 1204.3.7 (six hundred fourteen,seven hundred nine ,one thousand two hundred four point three point seven). complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
8	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand: ten graded stone aggregate 40 mm (forty millimetre nominal size) all work up to plinth level including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
9	Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size. excluding the cost of centering and shuttering all work upto plinth level complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
10	Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:3:6 (one cement : three coarse sand: six graded stone aggregate 20 mm (twenty millimetre nominal size) all work up to plinth level including entire carriage of material with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
11	Providing and laying mechanically mixed in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (one cement : two coarse sand: four graded stone aggregate) 20 mm (twenty millimetre nominal size all work up to plinth level including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
12	Providing and laying damp-proof course 50mm (Fifty millimeter) thick with cement concrete 1:2:4 (One cement : Two coarse sand : Four graded stone aggregate) 20mm (twenty millimeter) nominal size complete including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
13	Providing and applying a coat of residual petroleum bitumen of grade of VG-10 ((Viscosity grade-Ten) of approved quality using 1.7kg (one point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.complete including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
14	Making plinth protection 50mm (fifty millimeter) thick of cement concrete 1:3:6 (one cement : Three coarse sand : six graded stone aggregate) 20 mm (twenty millimetre) nominal size over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
15	Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
16	Providing and laying in position machine batched and machine mixed design mix M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concreteusing to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge all works above plinth level upto all floors level including entire carriage of material with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
17	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Design Mix M-20 (Nominal Mix M-Twenty) complete including entire carriage of materials with in with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
18	Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor all level, excluding cost of centering, shuttering, finishing and reinforcement design Mix M-20 Nominal Mix M-Twenty) including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
19	Providing and laying in position reinforced cement concrete work M-20 (M-twenty ) design mix with minimum cement contents not less than @320 Kilogram/Cubic metres (at the rate Three hundred twenty kilogram Per Cubic metre) including curing complete excluding cost of centering , shuttering , finishing and reinforced for reinforced concrete work in beams , suspended floor , roofs having slop upto 15 (fifteen) degree landing , balconies , shelves , Chajjas , lintels , bands , plain window sills , stair cases and spiral stair cases above plinth level upto all floor level including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
20	Providing and fixing in position Stainless steel Grade 304 (three hundred four) plate-1.0 mm (one point zero millimeter) thick as per design for expansion joints 300 mm (three hundred millimeter) wide. complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
21	Centering and shuttering including strutting, propping etcetra and removal of form work for Foundations, footings, bases for columns including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
22	Centering and shuttering including strutting, propping etcetra and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
23	Centering and shuttering including strutting, propping etcetra and removal of form work for Shelve (In cast Situ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
24	Centering and shuttering including strutting, propping etcetra and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
25	Centering and shuttering including strutting, propping etcetra and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of material with in all leads and lifts including all incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
26	Centering and shuttering including strutting, propping etcetra and removal of form work for Stairs, (excluding landings) except spiral staircases including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
27	Centering and shuttering including strutting, propping etcetra and removal of form work for Small lintels not exceeding 1.5 m (one point five metre) clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
28	Centering and shuttering including strutting, propping etcetra and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetre) wide . including entire carriage of material with in all leads and lifts and including all incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .
29	Centering and shuttering including strutting, propping etcetra and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetra including entire carriage of material with in all leads and lifts including all incidentals and as per drawings and technical specifications as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
30	Providing and erection of Tor steel reinforcement Thermo Mechanically Treated bars of grade Fe-500 (five hundered ) of Sail / TATA Tiscon/Shyam Steel/ Jindal panthar for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per approved specifications, drawing, design, as per entire satsfaction of the Engineer-in-charge including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
31	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material with in all leads and lifts and other incidentals and as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
32	Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:4 (one cement : Four coarse sand) in superstructure above plinth level up to all floors level including entire carriage of material with in all leads and lifts and other incidentals and as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
33	Providing and fixing 20 mm (twenty millimetre) dia chromium plated brass curtain rod having wall thickness of 1.25mm (one point twenty five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws , wooden plugs and PVC sleeves etcetra, wherever necessary complete including entire carriage of material with in all leads and lifts and other incidentals and as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
34	Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm ( twenty five into twenty five into five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm ( twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including carriage of material with in all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
35	Providing and fixing 22 mm (twenty two millimetre) thick commercial board water proof ISI (Indian Standard Institute) Marked is No 1659 (Sixteen hundred fifty nine) of (UNIPLY / GREEN Ply or its equivalent) shutters for cup boards including fixing with nical plated Piano hings with screws etcetra complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
36	Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board in shelves/box for cup board with butt joints and fixing with nails and screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material with in all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
37	Providing and fixing 1.00 mm(one millimeter) thick coloured or plain lamination sheet (Sunmica) on boards / ply wood sheets with approved adhesive and nails etcetra complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
38	Providing and fixing 6mm (six millimetre) thick water proof kit ply of standard quality ISI (Indian Standard Institute) mark and approved shade and colour in wall linning including mitring at junctions, butt jointing and nails complete (Frame work for base to be measured and paid for separately) including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
39	Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 (Indian Standard: Eighteen Hundred Sixty Eight) with minimum anodic coating of grade AC 15 (fifteen)) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm (two hundred millimeter) centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
40	Providing and fixing oxidised M.S. (mild steel) casement stays (straight peg type) with necessary screws etcetra complete 250 mm ( two hundred fifty) millimeter) weighing not less than 150 gms (one hundred fifty grams) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
41	Providing and fixing 50 mm (Fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
42	Providing and fixing 50 mm (Fifty millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
43	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institute), IS : 3564, (Indian standard Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
44	Providing and fixing 300x16mm (three hundred into sixteen millimeter) aluminium sliding door bolt anodized transparent or dyed to required shade and colour with bolts and nuts screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
45	Providing and fixing 250x16mm (two hundred fifty into sixteen millimeter) aluminium sliding door bolt anodized transparent or dyed to required shade and colour with bolts and nuts screws etc complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
46	Providing and fixing 250x10mm (two hundred fifty into ten millimeter) aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
47	Providing and fixing 150x10mm (one hundred fifty into ten millimeter) aluminium tower bolts (Berrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
48	Providing and fixing 125mm (one hundred twenty five millimeter) aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
49	Providing and fixing 100mm (one hundred millimeter) aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
50	Providing and fixing 75mm (one hundred millimeter) aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
51	Providing and fixing PTMT handles with necessary screws etcetra complete 125x34x24 mm (one hundred twenty five into thirty four into twenty four millimeter ) weighing not less than 23 gms (twnety three grams) complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
52	Providing and fixing aluminium hanging floor door stopper, ISI (Indian Standard Institute) marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian Standard one thousand eight hundred sixty eight)) transparent or dyed to required colour and shade, with necessary screws etcetra complete upto floor all level twin rubber stoper including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
53	Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete Triple strip vertical type Complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
54	Providing and fixing 100mm (one hundred millimeter) brass mortice latch and locks with 6 (six) livers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etcetra complete upto floor all level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
55	Providing and fixing 65x100mm (Sixty five into one hundred) millimeter factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows and other Frames/Chowkhat comprising of virgin PVC (Poly Venyl Choloride) polymer of K value 58-60 (fifty to sixty) (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 (twelve) for 100 gms (one hundred grams) ) fabricated with miter joints after applying PVC (Poly Venyl Choloride) solvent cement and screwed with full body threaded star headed SS (Stainless steel) screws having minimum frame density of 750 kg/cum (seven hundred fifty kilogram per cubic meter), screw withdrawal strength of 2200 N (twenty two hundred newton) (Face) and 1100 N (eleven hundred newton) (Edge), minimum compressive strength of 58 N/mm² (fifty eight newton per square millimeter), modulus of elasticity 900 N/mm² (Nine hundred newton per square millimeter) and resistance to spread of flame of Class A category with property of being Termite/borer proof, water/moisture proof and Fire retardant and fixed in position with M.S (mild steel)hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. (M.S (mild steel) hold fast/lugs or SS (Stainless steel) dash fasteners shall be paid for separately). complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
56	Providing and Fixing 35 mm (Thirty five millimeter) thick factory made Solid panel PVC (Poly venyl choloride) Door shutter, made out of single piece extruded soild PVC (Poly venyl choloride) profiles, 5 mm (Five millimeter) (± 0.2 mm (zero point two millimeter)) thick, having styles and rails (except lock rail) of size 95 mmx 35 mm x 5 mm (Ninty five into Thirty Five into Five millimeter), out of which 75 mm (Seventy Five millimeter) shall be flat and 20 mm (Twenty millimeter) shall be tapered (on both side), having one side thickness of 15 mm (fifteen millimeter) integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm (Forty millimeter into twenty millimeter into one millimeter), joints of styles and rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws and M.S. (mild steel) rectangular pipes bracket of size 190 mm X 100 mm (one hundred ninty into One hundred millimeter) of cross section size 35 mm x 17 mm x 1 mm (thirty Five into Seventeen into one milllieter) at each corner. Single piece extruded 5 mm (five millimeter) thick solid PVC (Poly venyl choloride) Lock rail of size 115 mm x 35 mm (one hundred fifteen millimeter into thirty five millimeter), out of which 75 mm (seventy five millimeter) to be flat and 20 mm (twenty millimeter) to be tapered at both ends, having 15 mm (fifteen millimeter) solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm (one hundred twenty five millimeter into eleven millimeter), including providing 5 mm (five millimeter) Single piece solid PVC (Poly venyl choloride) extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge.complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
57	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 (indian Standard : Seven Huundred Thirty Three) and IS: 1285, (Indian Standard: Twelve Hundred Eighty Five) fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
58	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 (indian Standard : Seven Huundred Thirty Three) and IS: 1285, (Indian Standard: Twelve Hundred Eighty Five) fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
59	Providing and fixing 12 mm (twelve millmeter) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 (Indian Standard : Twelve thousand Eight hundred twenty three) Grade l (one) Type ll (two), in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on both sides complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
60	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer- in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm (Five millimeter) thickness weight not less than 12.50 kg / sqm (twelve point fifty kilogram per square meter) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
61	Providing and fixing ISI (Indian standard Institute) marked flush door shutters conforming to IS : 2202 ( Indian Standard : Twnty two hundred two) (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm (thirty five (millimeter) thick including ISI (Indian standard Institute) marked Stainless Steel butt hinges with necessary screws35 mm (thirty five (millimeter) thick including ISI (Indian standard Institute) marked Stainless Steel butt hinges with necessary screwscomplete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
62	Providing and fixing aluminium wire gauge shutters for doors, windows (shutters of standard Z-sections) and other accessories ready made standard aluminium windows/ventilators with necessary fittings using galvanised M.S (mild steel) gauge of IS gauge designation 85G (Eighty Five gram) with wire of Dia 0.56 mm (Zero point Fifty six millimeter) for doors and windows , including carriage of materials with in all leads and lifts and as per direction Of the Engineer-In -Charge Complete. :- Side Hung Windows complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
63	Structural steel work of (TATA,SAIL or RASHTRIYA ISPAT) riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete in trusses and trussed purlins in building complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
64	Supplying and fixing rolling shutters of approved make, made of required size M.S. (mild steel) laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm (twenty seven point five centimeter) long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 (Indian standard: Forty four hundred fifty four) - part 1 (one) and M.S. (mild steel) top cover of required thickness for rolling shutters.complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
65	Providing and fixing ball bearing for rolling shutters complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
66	Providing grilled rolling shutters manufactured out of 8 mm (eight millimeter) dia M.S. (mild steel) bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured). complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
67	Providing and fixing M.S. (mild steel) fan clamp type I (one) or II (two) of 16 mm (Sixteen millimeter) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (Reinforcement Cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete upto floor all level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
68	Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
69	Providing and fixing stainless steel ( Grade 304 (three hundred four)) railing made of Hollow tubes, channels, plates etcetra, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etcetra, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etcetra) complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
70	Providing and fixing MS railing for stair case having balluster of 19x19mm (Nineteen into Nineteen millimeter) square bar with aclear height of 85cm (eighty five centimeter) embedded in cement concrete steps and jointed with a electrical/gas welding at top along with MS (Mild Steel) flat of 40mmx6mm (forty into six millimeter) size complete with a applyiong priming coat of red lead paint as per drawing and specification and as per direction of Engineer-in-charge.complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
71	Providing and fixing 18 mm (Eighteen millimeter) thick Sadar Ali / Red lakha / black granite gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimeter) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Granite of any colour and shade complete at all levels. complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
72	Providing edge moulding, nosing to 18mm (Eighteen millimeter) thick marble stone counters, Vanities etcetra including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
73	Providing and laying 19mm (Ninteen millimeter) thick Mirror Polished Kota stone slab flooring in tread of steps over 20 mm(twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
74	Providing and laying 19mm (Ninteen millimeter) thick Mirror Polished Kota stone slabs 20 mm (twenty millimeter) thick in using in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
75	Providing and laying Double Charged vetrified tiles (600x600mmx10mm) (six hundred millimeter into six hundred millimter into ten millimeter) in grey/coloured or of approved make Nitco /Kajaria / Simpolo /Johnson / Somany shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
76	Providing and laying Double Charged vetrified tiles (600x600mmx10mm) (six hundred millimeter into six hundred millimeter into ten millimeter) in grey/coloured of approved make Nitco /Kajaria / Simpolo /Johnson / Somany required shade in skirting risers of steps and dados on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
77	Providing and laying Full Body vitrified floor tiles 600X1200 mm (six hundred millimeter into twelve hundred millimeter) of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etc., complete at all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
78	Providing and laying Full Body Vitrified tiles in sizes 600X1200 mm (six hundred millimeter into twelve hundred millimeter) of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
79	Providing and laying Full Body vitrified floor tiles 600X600 mm (six hundred millimeter into Six hundred millimeter) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shades, laid on 20mm (twenty millimeter) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etcetra, complete at all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
80	Providing and laying Full Body Vitrified tiles in sizes 600X600 mm (six hundred millimeter into Six hundred millimeter) (thickness to be specified by manufacturer), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etcetra complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
81	Providing and laying Full Body Anti skid vetrified tiles (300x300mmx10mm) (three hundred millimeter into three hundred millimeter into ten millimeter) in grey/ coloured or of approved Nitco /Kajaria / Simpolo /Johnson / Somany shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimeter) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
82	Providing and laying Full Body Anti skid vetrified tiles (300x300mmx10mm) (three hundred millimeter into three hundred millimeter into ten millimeter) in grey/ coloured of required (Nitco /Kajaria / Simpolo /Johnson / Somany) shade in skirting risers of steps and dados on 12mm (twelve millimeter) thick cement mortar 1:3 (one cement :three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
83	Providing and fixing 1st quality ceramic glazed floor tiles size in 300x600mm (three hundred millimeter into six hundred millimeter) conforming to IS :15622 (Indian Standard: fifteen thousand six hundred twenty two) (thickness to be specified by the manufacturer ) of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany) in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimeter) thickbed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete upto floor all level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
84	Providing and laying 40 mm (forty millieter) thick Red sand stone fine dressed stone flooring over 20mm (twenty millimeter) (average) thick base of cement mortar 1:5 (one cement : five coarse sand) with joints finished flush. complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
85	Providing and fixing Ist (First) quality ceramic wall tiles sizes in 300x600mm (three hundred millimeter into six hundred) millimeter conforming to IS: 15622 (Indian Standard: fifteen thousand six hundred twenty two) (thickness to be specified by the manufacturer ) (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm (twelve millimeter) thick bed of cement mortar 1:3 (one cement : three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, (at the rate three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
86	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimeter) thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetra all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
87	Providing and laying leather finish Granite stone in Single piece tread of steps double round moulding required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimeter) thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
88	Providing and laying Polished finish Granite stone in Single piece riser of steps,dado required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimeter) thick stone slab over 20 mm (twenty millimeter) (average) thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
89	Providing and fixing Single socketed pipes 110mm (one hundred ten millimetre) dia of Supreme/Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, including jointing with seal ring conforming to IS : 5382 (indian standard five thousand three hundred eighty two), leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
90	Providing and fixing Single socketed pipes 75mm (Seventy five millimetre) diameter of Supreme/ Fenolax/D-plast/ Vectus make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ) Type A, complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government
91	Providing and fixing (Poly venyl Choloride) coupler 110mm (one hundred ten millimeter) on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes including fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
92	Providing and fixing Single Pushfit Coupler 110mm (one hundred ten millimeter) on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes including fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
93	Providing and fixing PVC Bend 110mm dia.(one hundred ten millimeter) on wal faces PVC (Poly venyl Choloride) (D-Plast) accessories for rain water pipes including fitting the joints with approved adhesive complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
94	Providing and fixing 0.60 mm(zero point six zero millimeter) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five)microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimeter) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
95	Providing and fixing ridges or hips 60 cm(sixty centimrter) over all with 0.60mm (zero point six zero millimeter) thick prepainted steel sheets of TATA DURASHINE in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating+ back coat of polyster of 5(five) microns over 5(five) microns primer coating including fixing with prepainted iron J or L hooks, bolts & nuts 6 mm dia (six millimeter diameter) and prepainted G.I.(galvanized Iron) limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
96	Providing and fixing valley 90cm (Ninty centimetres) overall 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet of Tata Durashine / Sail / Reliance / Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetres) dia with prepainted G.I. limpet and bitumen washers complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
97	Providing and fixing 15cm( fifteen centimeter ) wide 45cm ( forty five centimeter) overall semicircular plain G.I sheet gutter with iron brackets 40x3mm( forty into three millimeter) size bolts and nuts and washers etcetra including making necessary connections with rain water pipe complete as per design 0.63mm (Zero point six three millimetres) thick sheet including entire carriage of material with in all leads and lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
98	Providing and fixing mild steel BP sheet 1.66mm (one point sixty six millimetre) to 2mm (two millimetre) thick in eaves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separtely including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
99	Providing and plastering 15mm (Fifteen millimetres) cement plaster on the rough side of single or half brick wall of mix :1:6 (One cement into six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
100	Providing and plastering 6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:3 (One cement into three sand) complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
101	Providing and plastering 15mm (Fifteen millimetres) thick cement plasters in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty millimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) above plinth level to all floor level complete as per architectural drawings including carriage of material with in all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government.
102	Extra for plastering done on moulding, cornices or architraves including neat finish to line and level: complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
103	Providing and fixing Unistone.cladding on R.C.C. (Reinforced cement concrete) surface side as on faces of Arch masonry walls etc.on 12mm (twelve millimeter) thick cement plaster 1:3 (one cement : three sand) and jointed with cement slurry including scaffolding etc. complete. as per architectural drawing and as directed by the Engineer in-charge. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government
104	Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm (three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
105	Painting with Plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
106	Wall painting with acrylic emulsion paint of approved brand (Asian / Dulux /Berger paints/Nerolac paints) and manufacture to give an even shade two or more coats on new work complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
107	Painting with Premium acrylic emulsion paint of approved brand (Asian / Dulux /Berger paints/Nerolac paints) and manufacture to give an even shade two or more coats on new work complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
108	Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
109	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm (at the rate zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate zero point seventy five litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
110	Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (at the rate zero point ninty litre per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (at the rate zero point eighty litre per ten suare meter) of approved brand (Asian / Dulux /Berger paints/Nerolac) and manufacture complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
111	Distempering with 1st (First) quality acrylic Washable distemper (ready mixed) of approved manufacturer ( Nerolac/ Asian Paints) of required shade and colour complete, as per manufacturer's specification. complete upto all floor level including entire carriage of materials with with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
112	Construction coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm(fifteen centimeter into twenty two centimeter) in cement mortar 1:6 (one cement :six sand ) and inside plastering with cement mortar 1:3(one cemnt :three sand) including earth work and laying 10 cm (ten centimeter) cement concrete in 1:5:10 (one cement : five sand: ten aggregate) of 40 mm (forty millimeter) nominal size and 7.5 cm (seven point five centimeter) cement concrete 1:2:4 (one cement :two approved sand : four graded crushed stone aggregate of 20 mm (twenty millimeter) nominal size ) and finished with a floating coat of neat cement complete as per standard design complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
113	Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying (a)Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying ( b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm (ten centimeter) ( c) third layer of 1.5 mm (one point five milimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm (at the rate one poine two hundred eight nine kilogram per square meter) mixed with water proofing cement compound @ 0.670 kg/sqm (at the rate Zero point six hundred seventy kilogram per square meter) and coarse sand @ 1.289 kg/sqm (at the rate one poine two hundred eight nine kilogram per square meter). This will be allowed to air cure for 4 (Four) hours followed by water curing for 48 Forty eight) hours. The entire treatment will be taken upto 30 cm (thirty centimeter) on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
114	Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate) 20 mm(twenty millimeter) nominal size upto plinth level with :Cement mortar 1:6 (one cement : six coarse sand) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
115	WS&SI
116	Excavating tranches of required width of pipes cables etcetra not exceeding 80 mm (Eighty millimeter) dia complete in all kind of soil/ rock upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
117	Providing and fixing water closet squatting pan (Indian type W.C. (water closet) pan no.2071 (two thousand seventy one) ) (CERA, HINDWARE, PARRYWARE, make ) with 100 mm (one hundred millimeter) sand cast Iron P or S trap, 10 (ten) litre low level white P.V.C. (Poly venyl choloride) flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231 (Indian standard : seventy two hundred thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. (Water closet) pan of size type foot rests 580x440 mm (Five hundred eighty into four hundred forty) millimeter with integral complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
118	Providing and fixing vitreous china one piece EWC (Eurpean Water Closet) Cinco 220mm (two hundred twenty) millimeter S1013211 (S-one zero one three two one one) WC (Water Closet) (CERA, HINDWARE, PARRYWARE, make ) with low level flushing cistern seat and lid fixed with C.P. brass hinges and rubber buffers, 10 (ten) litre low level flushing cistern with fitting and brackets, 40 mm (forty millimeter) flush bend, 20 mm (twenty millimeter) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
119	Providing and fixing floor mounted, white vitreous china single piece WC (Water Closet) (CERA, HINDWARE, PARRYWARE, make ) double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etcetra including making connection with the existing P and S trap, complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
120	Providing and fixing white vitreous china pedestal type water closet Matrix type WC (Water Closet) (CERA, HINDWARE, PARRYWARE, make ) with seat and lid, 10 (ten) litre low level white P.V.C. (poly venylo choloride) flushing cistern,including flush pipe, with manually controlled device (handle lever),conforming to IS : 7231 (indian standard : seventy two hundred thirty one), with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. (water closet) pan with ISI (Indian standard institute) marked white solid plastic seat and lid complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
121	Providing and fixing Counter type wash basin (Hindware/ Cera/ Jaquar) with C.I. ((cast iron) brackets, 15 mm(fifteen millimeter) C.P. brass pillars taps ,32mm(thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 550x400 mm (five hundred fifty into four hundred millimeter) with a pair of 15mm (fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
122	Providing and fixing Counter type wash basin (Hindware/ Cera/ Jaquar) with C.I. ((cast iron) brackets, 15 mm (fifteen millimeter) C.P. brass pillars taps ,32mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fitting and brackets , cutting and making good the walls where ever required White vitreons China washbasin size 485x370x205 mm (Four hundred eighty fifty into three hundred seventy into two hundred five millimeter) with a pair of 15mm(fifteen millimeter) C.P. brass pillar tape complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
123	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of FLAT BACK URINAL 5001 (Five thousand one) SIZE 355x340x535 mm (three hundred fifty five into three hundred forty into five hundred thirty five ) millimeter respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I (Galvanised iron) clamps complete, including painting offittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 (five) litre white P.V.C. (Poly venyl Choloride) automatic flushing cistern complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
124	Providing nad fixing Division plate for urinals 600mmx300mm ( six hundred millimeter into three hundred millimetre) viterious china Cera/Jaquar/ Hindware /Parryware make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
125	Providing and fixing white vitreous china pedestal (CERA, Parryware, Hindware, Sanitaryware) for wash basin completely recessed at the back for the reception of pipes and fittings complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
126	Providing and fixing Stainless Steel A ISI 304 (18/8) (Indian standard institute three hundred four ( Eighteen / eight) kitchen sink as per IS: 13983 (Indian standard : thirteen thousand nine hundred eighty three) with C.I. (cast iron) brackets and stainless steel plug 40 mm (forty millimeter), including painting of fittings and brackets, cutting and making good the walls wherever required : Stainless steel kitchen sink - without drain board 610x460mm (six hunrded ten millimeter into four hundred sixty millimeter) bowl depth 200 mm (two hundred millimeter) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
127	Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. (stainless steel) Jet with flexible tube upto 1.00 (one point zero zeroo) metre long with S.S. triangular plate to Eureopean type W.C.(water closet) of quality and make ( Jaquare Opal series) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
128	Providing and fixing 32mm (forty millimeter)dia P.V.C. waste pipe for sink or wash basin (Finolex/ Relpipe (Reliance) / Vectus ) including P.V.C. waste fittings complete. Semi rigid pipe . complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government
129	Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) make of Atul,Modi Guard Golden Fish complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
130	Providing and fixing 600x120x5 mm (six hundred millimeter into one hundred twenty millimeter into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P.(chromium plated) brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etcetra, complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
131	Providing and fixing C.P. Brass toilet paper holder (Heavy duty make ISI (indian standard institute) marked No. 8931 and 8934 (Eighty nine hundred thirty one and Eighty nine hundred thirty four) of approved brand and manufacture continental series of Jaquar / Hindon series of JAL / ESS including neccessary fitting complete including entire carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
132	Providing and fixing 110mm (one hundred fifty millimeter) diameter high pressure PVC (Poly venyl choloride) spigot and socket, waste and ventilating pipes ISI (Indian Standard Institute) marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
133	Providing and fixing 75mm (seventy five millimeter) diameter high pressure PVC (Poly venyl choloride) spigot and socket, waste and ventilating pipes ISI marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
134	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC (Poly venyl choloride) Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
135	Providing and fixing 75mm (seventy five millimeter) diameter PVC (Poly venyl choloride) Clamps ISI (Indian Standard Institute) marked approved brand (Supreme/Fenolax/D-plast/ Vectus) of adhesive design with steel screws and rawl plugs etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
136	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC (Poly venyl choloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
137	Providing and fixing 75mm (seventy five millimeter) diameter PVC (Poly venyl choloride) single equal branch with oval access door, ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) insertion rubber washer 3mm (three millimeter) thick bolts and nuts complete including fixing with aprooved adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
138	Providing and Fixing 110mm(one hundred ten millimeter) diameter PVC (Poly venyl choloride) double equal branch ISI(indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
139	Providing and Fixing 75mm (seventy five millimeter) diameter PVC (Poly venyl choloride) double equal branch ISI (indian standard institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
140	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC (Poly venyl choloride) door bend with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
141	Providing and fixing 75mm (seventy five millimeter) diameter PVC (Polyvinyl chloride) door bend with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with aprooved adhesive etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
142	Providing and fixing 110mm (one hundred ten millimeter) diameter PVC (Polyvinyl chloride) collars ISI (Indian Standards Institute) marked brand (Supreme/ Fenolax/ D-plast/ Vectus) including fixing with aprooved adhesive etc complete complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
143	Providing and fixing 75mm (seventy five millimeter) diameter PVC (Polyvinyl chloride) collars ISI (Indian Standards Institute) marked brand (Supreme/Fenolax /D-plast/ Vectus) including fixing with aprooved adhesive etcetra complete complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
144	Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass wall mixer for bath with long headed bib cock and L-bend of continental series of Jaquar / Hindon series of Jal / ESSES (superior or heavy type) approved quality conforming to IS:8934 (indian standard eight thousand nine hundred thirty four) including carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
145	Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 110 mm x 75 mm (one hundred ten into seventy five millimeter) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
146	Providing and fixing CP Brass towel rail (ESSCO-AEC-1111 (eleven hundred eleven) complete with brackets fixed to wooden cleats with CP Brass screws with cocealed fittings arrangement of approved quality and colour 600mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre) width 78mm(seventy eight millimetre) and effective height of 88mm(eighty eight millimetre) weighing not less than 190 gms (one hundred ninety grams) of Hindware/ Cera/ Jaguar make complete including entire carriage of material with in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.
147	Providing and fixing 1216 (16mm OD (sixteen millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450 (indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
148	Providing and fixing 1620 (20 mm OD (twenty millimeter out side dia) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450 (indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
149	Providing and fixing 15 mm (fifteen millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
150	Providing and fixing 20 mm (twenty millimeter) dia nominal bore G.I. (galvanised iron) pipes complete with G.I. (galvanised iron)fittings including trenching and refilling etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
151	Making connection of G.I (Galvanized Iron ) distribution branch with G.I. (Galvanized Iron ) main 25mm (twenty five millimetre) to 40 mm ( forty millimetre) nominal bore by providing and fixing tee complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
152	Fixing water meter and stop cock in G.I. (Galvanized Iron ) pipe line including cutting and threading the pipe and making long screws etcetra complete ( cost of water meter and stop stop cock to be paid seprately). 200 mm (two hundred millimeter) nominal bore complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
153	Providing and fixing 20mm (twenty millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
154	Providing and fixing 25mm (twenty five millimetre) nominal bore size ball valve (brass) of approved quality, High or low pressure, with plastic floats complete of Zindal /Tata make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
155	Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 45cm ( fourty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Government.
156	Providing and fixing C. P. Brass overhead shower rose with 15mm (fifteen millimetre) inlet 85mm (eighty five millimetre) with single flow and shower arm of Continental series of Jaquar / Hindon series of Jal / ESSES including carriage of material with in all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, GST and any other taxes imposed by the Government.
157	Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. (cast iron) surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twenty millimeter) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twenty millimeter) thick, finished With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, , GST or other taxes imposed by the Government.
158	Providing and fixing 15 mm (fifteen millimeter) diameter nominal bore G.I. (galvanised iron) Union in G.I. (galvanised iron) pipe including cutting and threading the pipe and making long screws etcetracomplete (New work) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
159	Providing and fixing 20 mm (twenty millimeter) diameter nominal bore G.I. (galvanised iron) Union in G.I. (galvanised iron) pipe including cutting and threading the pipe and making long screws etcetra complete (New work) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
160	Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Finolex/Relpipe (Reliance)/Vectus), IS : 12701 (indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
161	Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chrome plated) brass bib cock of approved quality (Jaquar / Hindon series of Jal / ESSES (superior or heavy type) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
162	Providing and fixing C.P. (Chromium plated) brass long body bib cock of approved quality conforming to IS (Indian Standard) standards and weighing not less than 690 gms (Six Hundred Ninty grams) .15 mm (Fifteen Millimeter) nominal bore complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
163	Providing and fixing C.P. (Chromium plated) brass stop cock (concealed) of standard design and of approved make ( Jaquar / Hindon series of Jal / ESS (superior or heavy type) conforming to IS:8931(Indian standard : Eight thousand Nine hundred thirty one ).15 mm (Fifteen millimeter) nominal bore complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
164	Providing and fixing C.P. brass soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre ) breadth 102mm ( one hundred two millimetre ) height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six grams) of Jal, Jaquar Parryware, Hindware Make complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
165	Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. (reinforcement cement concrete) top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate) 20 mm (twenty millimeter) nominal size, foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate) 40 mm (forty millimeter) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate) 20 mm (twenty millimeter) nominal size finished with a floating coat of neat cement complete as per standard design : Inside size 90x80cm (ninty centimeter into eighty centimeter) and 45cm (forty five centimeter) deep including C.I. (cast iron) cover with frame (medium duty) 500 mm (five hundred millimeter) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg(fifty eight kilogram)) : With Sewer bricks conforming to IS : 4885 (Indian standred :four thousand eight hundred eight five) complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
166	Providing and laying 300 mm (three hundred millimeter) dia. R.C.C. (Reinforced cement concrete) pipe Non Pressure NP-3 (three) class (Medium duty) R.C.C. (Reinforced cement concrete) pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
167	Providing and laying 600 mm (six hundred millimeter) dia. R.C.C. (Reinforced cement concrete) pipe Non Pressure NP-3 (three) class (Medium duty) R.C.C. (Reinforced cement concrete) pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two fine sand) including testing of joints etcetra complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
168	Constructing soak pit 1.20x1.20x1.20 m(one point twenty meter into one point twenty meter into one point twenty meter) filled with brickbats including S.W. drain pipe 100 mm (hundred millimeter) diam complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government .
169	Providing and fixing in position pre-cast R.C.C.(reinforced cement conceret) manhole cover and frame of required shape and approved quality Circular shape 450 (four hundred fifty) mm internal diameter complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
170	Providing and fixing 110mm(One hundred ten millimeter) PVC (Polyvinyl chloride) Cowl complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
171	Providing and fixing 75mm (Seventy five millimeter) PVC (Polyvinyl chloride) Cowl complete upto floor all level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.
172	Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra, of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm (fifty millimeter) thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm (Eighty millimeter) thick C.C. (Cement concrete) paver block of M-30 (Nominal mix M-thirty) grade with approved color design and pattern, complete upto all floor level including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Fabrication and Casting Tenders

Bus Stand Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Bus Stand At Bhota Tehsil Barsar, Distt. Hamirpur (H.P.) Sh:-Building Portion, Ws & Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. (Deposit Work) Estimated Cost:-Rs.83688801.00 Earnest Money:- Rs. 16,, Barsar-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Bus Stand At Bhota Tehsil Barsar, Distt. Hamirpur (H.P.) Sh:-Building Portion, Ws & Si, Septic Tank, Rain Water Harvesting Tank And Site Development Etc. (Deposit Work) Estimated Cost:-Rs.83688801.00 Earnest Money:- Rs. 16,, Barsar-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us