|
| 1 | Dismantling of roofing i/c ridges hips velleys gutters stacking the serviceable materials and disposal of unserviceable materials with in 20 mtrs complete in all respect. |
| 2 | Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering,strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 3 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 4 | Edges of slab. |
| 5 | Beams, cantilevers, girders & lintels, sides & soffits of beams, haunching, cnatilevers, bressumers 1.00 mtrs in depth in all heights from door in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 6 | Providing mild or tor steel reinforcement for RCC Work including bending binding and placing in position complete upto floor two level Tor steel complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 7 | Providing and fixing MS fan clamp (Type-I of 16mm dial M.S,. Bar bent to shape with hooked ends in RCC Slab during laying including painting the exposed portiong of loop all as per standard design complete in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 8 | Providing and laying cement concrete work 1:2:4 (1 Cement: 2 sand :4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts. |
| 9 | 20 mm thick cement plaster for single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises internal rounded angles chamfers or rounded angles not exeeding 80mm in girth and fixed even smooth in 1:6 (1: cement : 6 sand) within all leads and lifts |
| 10 | 6mm cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand) in all leads and lifts. |
| 11 | White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts. |
| 12 | 2nd class Half brick masonary using common burnt clay building bricks in CM 1:4 (1 cement :4 sand) within all leads and lifts to the entire satisfaction of Engineer-in-charge. |
| 13 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, jumper blast,blasting soft / hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer- in- charge clear from the edge of excavation and then returning the stacked soil in 15 cm layer when required into plinth and side of foundation etc. Consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth by the Engineer- in- chargeup in all leads and lift.PJ50% each |
| 14 | Providing and laying cement concrete work 1:5:10( 1 cement :5 sand :10 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. |
| 15 | Providing and fixing aluminium door with ventilator including frame paneled glazed shutter with necessary screw complete in all respect within all leads and lifts. (1.10 m x1.80 m) |
| 16 | White glazed tiles 6mm thick in Skirting, riser of step and dado and vertyical surfaces laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished white cement slurry complete in all respect including carriage of material in all leads & lifts. Please Enable Macros to View BoQ information |
