|
| 1 | Repair of 100 HP KSB make pump Set-1 of LWSS Kandhapattan to Sajao piplu |
| 2 | providing Stainless steel conter and balance disc all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 3 | Providing & fixing of bearing NU 207ECKP/C3 SKF make complete in all respect within all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 4 | Providing & fixing of Gland sleeves (SS sleeve 45 mm dia L-110) complete in all respect as per direction of Engineer-in-charge. |
| 5 | Providing & fixing of O Ring 12 inch complete in all respect within all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 6 | Providing & fixing neckring outer dia 145 mm complete in all respect as per direction of Engineer-in-charge. |
| 7 | Turning bearing diffuser gallary complete in all respect as per direction of Engineer-in-charge. |
| 8 | Providing and fixing CI distance bush outer dia 47 mm inner dia 35 mm complete in all respect as per direction of Engineer-in-charge.. |
| 9 | Providing and fixing disc screw SS 8 mm complete in all respect as per direction of Engineer-in-charge. |
| 10 | Providing and fixing coupling with pin Bush complete in all respect as per direction of Engineer-in-charge. |
| 11 | Carriage of Pump from site of work to work shop & Back to site of work i/c fitting and testing complete in all respect as per direction of Engineer-in-charge. |
| 12 | Repair of 100 HP matherplatt pump Set-1 of LWSS Rakhoh Cholthra Awah Devi and Tihra Area(Rosso) |
| 13 | Providing & fixing of bearing NU 306ECJ/C3 SKF make complete in all respect within all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 14 | Providing & fixing of Gland sleeves (SS sleeve 45 mm dia L-110) complete in all respect as per direction of Engineer-in-charge. |
| 15 | Providing & fixing of O Ring 12 inch complete in all respect within all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 16 | Impeller Neckring, polishing & turning complete in all respect as per direction of Engineer-in-charge. |
| 17 | Providing & fixing of O Ring outer dia 145mm complete in all respect within all leads and lifts as per direction and to the satisfaction of Engineer-in-Charge. |
| 18 | Turning bearing diffuser gallary complete in all respect as per direction of Engineer-in-charge. |
| 19 | Providing and fixing CI distance bush outer dia 47 mm inner dia 35 mm complete in all respect as per direction of Engineer-in-charge.. |
| 20 | Providing & fixing of new impeller complete in all respect as per direction of Engineer-in-charge. |
| 21 | Providing Rubber coupling with pin bush complete in all respect as per direction of Engineer-in-charge. |
| 22 | Providing & fixing of shaft complete in all respect as per direction of Engineer-in-charge. |
| 23 | Carriage of Pump from site of work to work shop & Back to site of work i/c fitting and testing complete in all respect as per direction of Engineer-in-charge. |
| 24 | Repair of 50 HP KSB make pump Set-2 of (Raw water stage of LWSS RCAD) |
| 25 | Providing & fixing of bearing bush in housing complete in all respect as per direction of Engineer-in-charge. |
| 26 | Providing & fixing of rotor sleeves complete in all respect as per direction of Engineer-in-charge. |
| 27 | Impeller Neckring, polishing & turning complete in all respect as per direction of Engineer-in-charge. |
| 28 | Providing & fixing of bearing sleeves housing complete in all respect as per direction of Engineer-in-charge. |
| 29 | Providing & fixing of gland bush complete in all respect as per direction of Engineer-in-charge. |
| 30 | Carriage of Pump from site of work to work shop & Back to site of work i/c fitting and testing complete in all respect as per direction of Engineer-in-charge. |
| 31 | Repair of 50 HP Apex Motor Set No.1 Raw water stage LWSS (RCAD). |
| 32 | Rewinding of 50 HP Apex Motor Set No.1 Raw water stage LWSS (RCAD). |
| 33 | Providing & fixing of bearing 6313/C3 complete in all respect as per direction of Engineer-in-charge. |
| 34 | Providing & fixing of rotor sleeves complete in all respect as per direction of Engineer-in-charge. |
| 35 | Impeller Neckring, polishing & turning complete in all respect as per direction of Engineer-in-charge. |
| 36 | Carriage of Pump from site of work to work shop & Back to site of work i/c fitting and testing complete in all respect as per direction of Engineer-in-charge. |
| 37 | Providing and fixing double flanged Cast Iron gate valve of Kirloskar/Leader make conforming to IS:14846/2000 with up to date amendment as per Class PN-1.6 to withstand in 10.20 kg/cm² seat pressure including welding with M.S. flanges Table-17 as per IS 6392-1971 including carriage in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 38 | 80 mm dia Please Enable Macros to View BoQ information |
