|
| 1 | Providing and fixing 6mm (six millimetre) thick plyboard IS: 3087 marked, in ceiling with necessary nails etcetera (frame work to be paid separately) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 2 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five millimetre), joints mitred and welded by angle iron 35x35x5 mm(thirty five into thirty five into five millimetre) or 35x 5 mm(thirty five into five millimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and fixing 1mm (one millimetre) thick M.S. sheet door with frame of 40x40x6 mm(forty into forty into six millimetre) angle iron and 3 mm(three millimetre) M.S. gusset plates at the junctions and corners,using flats 30x6mm(thirty into six millimetre) for diagonal braces and central cross piece all necessary fittings complete, including applying a priming coat of approved steel primer complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (twenty millimetre) in patches of area 2.5 (two point five) squaremeters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, with cement mortar 1:4 (one cement : four fine sand) including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 5 | Providing and fixing 35 mm(thirty five millimetre) thick ISI marked flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3(three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete within all leads, lifts carriage of material and other incidental complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and fixing 250x16mm (two hundred fifty into sixteen millimetre) ISI marked oxidised M.S. sliding door bolts with nuts and screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing 200x10mm (two hundred into ten millimetre) ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 8 | Providing and fixing 100mm (one hundred millimetre) ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 9 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etcetera complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade on new work (Two or more coat applied @ 1.67 ltr/10 sqm (at the rate of one point sixty seven litre per ten squaremetre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (at the rate of two point twenty kilogram per ten squaremetre) complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 11 | Painting wood work with Deluxe Multi Surface Paint of required shade two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. |
| 12 | Distempering one or more coats on old work with oil bound washable distemper of approved brand and manufacture to give an even shade complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge. |
| 13 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade two or more coats applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture including carriage of material in all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
