|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R, BRANCH FEROZEPUR Name of Work: Modernization of 03 no's Link Roads and Construction of 09 no's New Link Roads Falling Under MC Mallanwala Distt. Ferozepur Under Scheme of Special Assistance Project Ph-2 Year 2025-26 Including 5 Year Maintenance (1 Year Defect Liability Period + 4 Years Maintenance Period) (Group No. 02)1. New Construction Link Road of Kohala-Mallanwala Road Dhani Baaz Singh2. New Construction Link Road of Bute Wala to Walayti Shah Wala3. New Construction Link Road of Village Gogoani New Gurudwara Sahib to Zira FZR Road Via Dera Baba Hukam Lal Ji4. New Construction Link Road of Village Jaura Stadium to Keeme Wali Jaura Road5. New Construction Link Road Mannochahal to Lohke Khurd & Asaf wala drain bridge to Basti Dlip Singh 6. New Construction Link Road of Village Valtoha to Basti Khushal Singh7. New Construction Link Road of Village Machi Ke Kamal Wala Road to Ashi Ke8. New Construction Link Road of Maroor to Mankian Wali9. New Construction Link Road Chuchak to Mahian Singh Wala10. Fattehgarh Sabraon Road To Rodewala (F 10059)11. Mallanwala-Makhu Road to Jattanwali (F10008)12. FZR- MALLANWALA ROAD TO JAIMAL WALA (M.C. LIMIT) (F10001) Contract No: Civil Works Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Work Name Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Part-1 (Const. work)Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one metre interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead complete as per technical clause 404 of MORT&H specifications ( Full surface area will be measured for payment)Reconst. Portion ( Type -I) |
| 3 | Dismantling of existing brick on end edging complete in all respect as per PWD specifications. |
| 4 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, inal dressing of earth to give level, camber, atering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. (In case of link roads earth work to be done by villagers |
| 5 | Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications |
| 6 | Construction of granular sub base by providing material , spreading in uniform lyaers with mortor grader on prepared surface, mixing by mix ibn place method with rotavator at OMC , and compacting with vibratory roller to achieve the desired dinsity, complete as per MORD technical specifications. |
| 7 | Providing,Laying, Spreading and compacting stone aggregates of grading -I to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons ( without screening for low volume roads /undesigned) |
| 8 | Providing,Laying, Spreading and compacting stone aggregates of grading -II to water bound macadam specificaton in cluding spreading in uniform thickness, hand pacing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requiste type of binding materials to fill up the interstitices of coarse aggregate, waterin gand compacting to the required denisty complete as per technical specificatons ( without screening for low volume roads /undesigned) |
| 9 | Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications |
| 10 | Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause |
| 11 | Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications |
| 12 | Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, carriage of mixed material to site of work, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications. |
| 13 | Dressing of earth work PWD specifications complete in all respects. |
| 14 | Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in- Charge. |
| 15 | Kassi work undressed involving and average horizontal throw up to 2.0 Meters and an average vertical lift up to 0.50 Meters including breaking of clods. |
| 16 | Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications |
| 17 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. |
| 18 | Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications (Labour Rate Only) |
| 19 | Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at approved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications |
| 20 | Construction of 600 mm dia Hume Pipe complete as per PWD specification |
| 21 | Construction of Slap type culvert 600 mm |
| 22 | Repair of parapet of existing hume pipe culvert |
| 23 | Construction of Slab Type Culvert 4 Mtr |
| 24 | Construction of Slab Type Culvert 5 Mtr |
| 25 | Const. of side drain 1'wide x 1' heigh with 9\\" Wall |
| 26 | Reinforced cement concrete M-15 grade Kilometer stone of standard design for village roads s per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specification |
| 27 | Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications |
| 28 | Reinforced cement concrete M-15 grade 200 metre stone of standard design. |
| 29 | Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications |
| 30 | Providing & fixing cautionary sign board (600x600x600) traingular with defination plate ( 600x200mm) as per IRC 67-2012 |
| 31 | Informatory sign board 800x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 . Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 |
| 32 | Road marking with thermoplastic compound paint 10cm width |
| 33 | Moulded Shank Road StudSupplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds as per Clause 804.7.3 of MORT&H 5th revision specifications. |
| 34 | Place Identification sign board 900x600mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012. Using high intensity Microprismatic grade retro reflective Sheeting Type IV as per ASTM D 4956 09 and as per IRC 67 2012 |
| 35 | Videography of all the roads included in DNIT to be done before the start of any work. Videography to be undertaken in the presence of an officer not below the rank of SDE / JE. Two video copies of each road to be submitted by contractor. It must cover all reaches and aspects of the road. |
| 36 | Credit of Old Material Bricks |
| 37 | Brick bats ( M-12(d) ) |
| 38 | Add extra Cost of Heritage & Cultural Cess @ 1.00% on Constn Work + 1% Cancer Cess |
| 39 | PART-II Routine Maintenance work for 4 years (2nd year to 5th year) |
| 40 | Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 2nd Year) |
| 41 | Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 3rd Year) |
| 42 | Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 4th Year) |
| 43 | Routine Maintenance of Construction work as per periodicity to routine maintenance mentioned in the technical specifications (for 5th Year) |
| 44 | Heritage & Cultural Cess @ 1.00% on Routine Maintenance Part-II Total in Figures 83003470.0 83003470.0 INR Eight Crore Thirty Lakh Three Thousand Four Hundred & Seventy Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Routine Maintenance 7494102.0 Quoted Rate in Words INR Zero Only Note 1. Routine Maintencae Four Years (2nd year to 5th year) is Fixed Amount. Contractor will Quote his Rate (Percentage) Below or Above only Part-I i.e. Cost BOQ2. Routine Maintenance of Roads there Lumsum provision for each year of maintenance the payment should be made for actual work done at site measured in MB by concerned Engineer. Please Enable Macros to View BoQ information |
