|
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 3 | First class burnt brick laid in cement sand mortor 1:6 in foundation and plinth. |
| 4 | 12.5 mm thick Cement Plaster 1:5 cement mortar. |
| 5 | Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications (24.5 (a) |
| 6 | Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating leadupto 30 metres |
| 7 | Providing, laying, spreading and compacting stone aggregates of Grading I (63-45 mm stone metal) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled rolle 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to therequired density complete as per technical clause 404 of MORT&H specifications (24.11 (I) |
| 8 | Providing and applying tack coat with bitumen VG- 10 @ 0.40 kg per sqm |
| 9 | Providing and laying bituminous macadam 50mm to 75mm thick with Continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid over a previously prepared surface with paver finisher Mechanical to the required grade,level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications (24.18 (b) |
| 10 | Providing and applying tack coat with bitumen VG- 10 @ 0.40 kg per sqm |
| 11 | Providing and laying bituminous concrete 30mm to 45mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications (24.23 (b) |
| 12 | Providing and Laying 8 layers Synthetic Acrylic Standard System |
| 13 | Supply and Installation of Moveable Basketball Post 150 mm Sq tube 3.2 M boom |
| 14 | Supplying of galvanized steel chain link fence |
| 15 | Centering and shuttering for columns (circular or curved in plain) |
| 16 | Reinforced cement concrete M-20 mechanically mixed using voluemetric type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. (5153-216+136 = 5073) |
| 17 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 18 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 19 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Please Enable Macros to View BoQ information |
