Tender For Estimate For Supply, Erection And Commissioning Of Vt Pumps With All Accessories For Replacement Of Pump House O.P Jindal Nalwa Disty. Including Supply Of Eot 5 Ton Crane For Amounting To Rs. 269.35 Lacs., Hisar-Haryana
TDR : 54404177
Tender Notice
BOQ
7 Days Left
Hisar
Haryana
Tender For Estimate For Supply, Erection And Commissioning Of Vt Pumps With All Accessories For Replacement Of Pump House O.P Jindal Nalwa Disty. Including Supply Of Eot 5 Ton Crane For Amounting To Rs. 269.35 Lacs.
Name of Work:- Estimate for supply, erection and commissioning of VT pumps with all accessories for replacement of pump house O.P Jindal Nalwa Disty. Including supply of EOT 5 Ton crane for amounting to Rs. 269.35 lacs.
Sl. No.
Item Description
1
Supply, Erection and commissioning of 35 Cs. V.T. Mixed flow pumps of 980 RPM, having static lift of 10 feet including MS delivery pipe as per site requirement with all flanges, Y-body as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flanged welded, HT nuts &bolts Mange welded, , siphon Breaker valve bell mouth and support of bend with any other left over item duly painted inner and outer side complete in all respect. As per site included of all civil work also and as per approved technical specification
2
Supply, erection and commissioning of Solid shaft motor of capacity 150 HP, 980 RPM, 3 phase 415 Volt +-10%, 50 HZ with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 35 Cs. VT Axial flow pumps with 10 feet lift type Vertical flange mounted & as per approved technical specification with earthling of motor complete in all respect as per site requirements complete in all respect.
3
Supply, Erection commissioning of 20 Cs water lubricated VT pump with static head 10ft. with Y-body 8 Mm of MS sheet with bend including suitable size MS delivery pipe as per site requirement with thickness 8 MM both side flange welded including SS nut and bolt, rubber seat and other fitment accessories required complete all respect as per approved by technical committee
4
S.E.C of fully automatic of squirrel cage induction VT motor capacity 100 HP 975 RPM 3 phase 440/415V suitable for 20 cs VT axial flow pump type vertical flanged as per specification approved by technical committee
5
Supply of 415 volt, 1250 Amp, 3 Phase 50 Hz, Motor Control Centre L.T. Panel with main incomer and 5 no. outgoing feeder with Auto Transformer Starter Air/oil cooled Panel for operating, 3 No. 150 HP Motor 2 Nos. 100 HP Motor fitted with suitable range ACB, MCCB , Air break contractor , micro controller based fault protecting device / replay and other allied accessories in all respect with approved specification
6
Providing and Laying LT Armored PVC Copper Cable of size 185 Sq. mm 3.5 core from main switch to panel with copper thimbles at both end conforming to IS 7098-1985 as per approved make
7
Supply, erection and commissioning of 5 ton capacity EOT crane with all standard things and accessories as per requirement of site at nalwa OP JINDAL Nalwa Pump House Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
