|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:50 meter beyond 1 m from cutting edge,All kinds of soil |
| 2 | Providing and laying in position stone soling using Nallah stone including all leads, lifts and carriages complete job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 6 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor v level |
| 7 | FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconi. and access platforms. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Providing /Applying 12mm Cement plaster of mix: 1 : 6 (1 cement : 6 fine sand) |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing and fixing 1st quality ceramic glazed floor tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle green, black of anysize as approved by Engineer-in-Charge in skirting, risers of steps anddados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm includingpointing in white cement mixed with pigment of matching shadecomplete |
| 14 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete,2 mm thick |
| 15 | Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported KD |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws(30mm thick) |
| 17 | Providing and fixing of hardware items of good quality(bright finished brass) including cost of screws all complete job |
| 18 | Handles 125mm |
| 19 | T Bolt 150x10mm |
| 20 | AL drop(L Type rod lock 9\\") |
| 21 | Providing and fixing of conduit pipes 25 mm dia ,fan boxes and lighting boxes for electric fittings including embedding in walls all completet job |
| 22 | P/F in position Pre cast Cement Concrete Jali in 1:2:4 mix ratio reinforced with 6mm dia mild steel wire,incl cement mortar of mix 1:3(18\\" x 18\\") |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade incl priming coat of wooden primer.( Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacturer ) |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or Strap,. liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wallsand floors wherever required. Whitevitreous china Orissa pattern W.C. pan of size 580.x440 mm with integral type foot rests. CompleteJob. |
| 25 | Providing and fixing B Class ( Prince) PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same com pletewith putty, rubber washer and adhesive etc. 100mm. |
| 26 | Providing and fixing of B-class/ Prince/ UPVC fittings/fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same completewith putty, rubber washer and adhesive.Plain bend 110 mm dia. |
| 27 | UPVC Plain bend 75mm dia |
| 28 | UPVC Door bend 100mm dia |
| 29 | UPVC Door bend 75mm dia |
| 30 | PVC Reducer 100mm x 75mm. |
| 31 | UPVC Collar 100mm dia. |
| 32 | UPVC Collar 75mm dia. |
| 33 | UPVC Floor Trap 75mm .100mm dia |
| 34 | UPVC Stays and clampsfor PVC Pipes 100mm dia. |
| 35 | UPVC Stays and clampsfor PVC Pipes 75mm dia |
| 36 | UPVC Vent Pipes75mm dia. |
| 37 | UPVC Manhole cover 18\\"x18\\" |
| 38 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusionwelded, having thermal stability for hot and cold water supply includingall PP-R plain and brass threaded Polypropylene random fittings. Thisincludes testing of joints complete as per direction of Engineer-incharge.Internal work-exposed on wall with clamps at 1.00 meterspacing |
| 39 | PN-16 pipe , 25mm OD(SDR-7.4) |
| 40 | PN-16 pipe , 32mm OD(SDR-7.4) |
| 41 | Providing and fixing PPR Unions |
| 42 | PPR Union 25mm |
| 43 | PPR Union 32mm |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank.' 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank /Sint, Electroplast, Star, Lotusor equivalent having valid ISI license/. completelob |
| 45 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 |
| 46 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. |
| 47 | Carriage of sand by MT for an av Lead of 30km |
| 48 | Carriage of Agg by MT for an av Lead of 15km |
| 49 | Carriage of Bricks by MT for an av Lead of 10km Please Enable Macros to View BoQ information |
