|
| 1 | Engagement of manual labour for Clearance of manhole, site including disposal of same, all complete |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(1200x600mm) |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm ( anti skid) |
| 4 | Dismantling tile work in Walls, floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm |
| 5 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 8 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 9 | Providing, commissioning and fixing on wall 50 Ltrs of Hot water Geyser of approved make (Venus/Racold or equivalent make) with necessary accessories all complete |
| 10 | Construction of Wardrobes / In-built Almirah 600mm deep made up of water proof block boards having panelled / flush door Shutters with teak wood / sunmica including all fixtures complete |
| 11 | Providing and fixing of 30mm thick glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes inluding ISI marked M.S pressed butt hinges bright finished of required size with necessary screws.First Class Kail Wood |
| 12 | Providing and fixing 30mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).First class kail wood |
| 13 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.First class kail wood |
| 14 | Providing & Fixing of 4mm thick float glass including wooden beading 35mm x 12mm to be fixed to wooden frame with nails, screws complete |
| 15 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 16 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 17 | inting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 18 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc, including all Fixtures A) PN-16 pipe , 16mm OD(SDR-7.4) |
| 19 | B) PN-16 pipe , 20mm OD(SDR-7.4) |
| 20 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.150x10 mm |
| 21 | Providing and fixing 110mm dia PVC pipes (Type-B) of approved quality including allied accessories like collars, door junctions, sockets, bends etc all complete |
| 22 | Wiring for light point/ fan point/ exhaust fan point point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS (Flame Retardent, Low Smoke Low Halogen) PVC insulated copper conductor single core cable etc. as required. complete job |
| 23 | Providing and Fixing of Exhaust fan of approved Make |
| 24 | Providing and fixing of CP fittings of Jaquar /Parko or equivalent make. CP angle value |
| 25 | CP wall mixer |
| 26 | CP basin mixer |
| 27 | CP gratting. |
| 28 | PVC connections |
| 29 | Looking mirror with coner shlefs complate set |
| 30 | CP Towel rod |
| 31 | 15mm dia CP bib cock.Long thrid |
| 32 | P/F of C.P waste |
| 33 | P/F of waste Pipe Please Enable Macros to View BoQ information |
