|
| 1 | Earth work excavation in ordinary soil in F&P within initial lead of 50 m and initial lift of 1.50 m including rough dressing and breaking the clods, etc all complete as per direction of engineer- in-charge. |
| 2 | Conveyance of excavated earth by mechanical means within 5km lead with loading and unloading the same etc complete |
| 3 | Supply and filling the F & P with filling sand of approved quality with well watered & rammed including cost, conveyance, royalty & all taxes, etc., complete. |
| 4 | Supplying all materials, labour, T&P for C.C. (1:4:8) using 40 mm size HG HAND BROKEN metal including laying, compacting, curing, with all cost, conveyance, royalty & taxes, etc., complete. |
| 5 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 23cm x 11cm x 8cm brick having crushing strength not less than 75 Kg / cm2 |
| 6 | Brick work with flyash bricks 23cm x 11cm x 8cm size having crushing strength not less then 75 kg/cm2 in cement mortar (1:6) in superstructure including curing, cost and conveyance of all materials, etc.complete. |
| 7 | 12mm thick cement plaster (1:6) on brick work including curing, cost & conveyance, royalty & all taxes, etc., complete. |
| 8 | Supplying M.S Grill Gate made out of M S Angle, MS Flat, MS Sqr bar and MS Sheet of approved design including cost of materials fabrication cost and delivering at work site. |
| 9 | Painting two coat with any approved paint with Priming one coat with any approved primer on new wood/Iron work etc complete. |
| 10 | S/F/F of ceramic floor tiles of premium grade having thickness 7mm to 8mm( 30cm x 30cm / 40cm x 40cm special plain / printed series ) |
| 11 | S/F/F of ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series ) |
| 12 | Priming one coat with any approved primer including the cost of labour & primer. |
| 13 | Wall painting two coats with plastic emulsion paint of approved shade on new work to give an even shade excluding cost of paint |
| 14 | R.C.C work of M-20 grade with 20mm & down grade BHG C/B chips including hoisting, laying & all cost, conveyance, royalty & taxes etc. comp. to work site as per the specification approved by the deptt. & direction of EIC.( Data for 15 cum) |
| 15 | Supplying fitting and placing uncoated HYSD steel reinforcement including cutting bending binding and placing the steel rods in position with cost binding wire 18 to 20 gauge |
| 16 | Rigid & smooth centering & shuttering for R.C.C. and C.C. works including false works, dismantling and removing them from the site after casting, curing including cost of materials etc., complete. |
| 17 | Column upto top |
| 18 | Plingth beam |
| 19 | Lintel |
| 20 | Roof slab |
| 21 | Supplying fitting & fixing of Water supply and sanitary fittings with over head tank etc.complete Please Enable Macros to View BoQ information |
