|
| 1 | Supply of 9 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 70 mm & bott om dia 155 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 260X260X16 mm thick shall be welded (Inside & outside) with pole shaft, 4 Nos M20X700mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB, containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) |
| 2 | Supply of 48.4MM OD HDG Single Arm bracket (1.5Mtr Long) suitable for carrying different wattage Street light for Octagonal Pole/Tubular Pole |
| 3 | Supply of 48.4MM OD HDG Double Arm bracket (1.5Mtr Long) suitable for carrying different wattage Street light for Octagonal Pole/Tubular Pole |
| 4 | Constructing RCC Foundation of size (1000x1000x1500)mm for errection of the above pole. |
| 5 | Supply and fixing of Coil earthing. |
| 6 | Supplying, Installation and Commissioning of energy saving LED 90 watt street light with IP-66 and IK-08 protection & 140 Lumen/Watt efficasy. |
| 7 | Supply and laying of 4x16mm2 Al.Ar. U.G cable. |
| 8 | Supply and laying of 3 ½ X 25mm2 Al.Ar. UG Cable. |
| 9 | Cable trenching in all type of soil excepting rockey soil including excavation of earth,brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1 no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km. |
| 10 | Supply and Laying of 40mm HDPE pipe for laying of Cable. |
| 11 | Construction of pedastal for the panel in ash brick of size (900x450x600)mm. |
| 12 | S/F of 63 Amp Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp 25KA 4P MCCB-1 NoOutgoing:-1.40Amp TPN MCCB-01 No. 2.32Amp DP MCB-2 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. 7.Time switch with contactor complete set Size of panel board 36\\"x 24\\"x10\\" |
| 13 | Supply and fixing of standard earthing to the panel. |
| 14 | 11 KV cut point with 90 degree - 02 nos. |
| 15 | WPB 160x160x6-11M 30.44 KG/MTR Line |
| 16 | 100x50x6 G.I Channel |
| 17 | G.I Flats 50x6mm |
| 18 | Danger Board 11KV |
| 19 | GI Flats 25 x 3mm |
| 20 | GI Standed wire barbed wire |
| 21 | Pin Insul polymer 11Kv 20MM FRP DIA |
| 22 | H/W/F(B&S) 70KN 3 Bolt |
| 23 | Insu Disc polymer 11KV B&S 70KN |
| 24 | Coil earthing |
| 25 | GI Earth wire no.8 SWG/4.06MM Dia |
| 26 | Wedge connector for 55sqmm conductor |
| 27 | Polycarbonate bird guard |
| 28 | Stay clamp 150x 150mm RS Joist |
| 29 | HT Stay set complete |
| 30 | Insulator stay HT |
| 31 | GI Standrad wire 7.10 SWG-7/3 25MM |
| 32 | GI Bolts & nuts assorted dimension |
| 33 | Black paint with barrel |
| 34 | Enamel paint yellow |
| 35 | Inst 11KV Complt stay set ith concrete |
| 36 | Laying of PCC M20 |
| 37 | Conductor Raddit AAAC 55 Sqmm |
| 38 | D.P. Mounted DSS -02 Nos. |
| 39 | WPB 160x160x6-11M 30.44 KG/MTR Line |
| 40 | 100x50x6MM G.I Channel |
| 41 | GI Flats 50 x 6mm |
| 42 | GI Channel 75x40x4.8mm |
| 43 | GI Angle 50x50x6mm |
| 44 | Transformer 25KVA 11/.4 KV |
| 45 | LT Distribution box 25KVA S/S 11/0.4KV |
| 46 | AAAC 1KV XLPE Insu CVRD CDTR. 55SQMM |
| 47 | Cable 1.1KV LT XLPE 4C x 35sqmm Armd-ALU |
| 48 | AB S/W 11KV Trip Pole Gang ope 200A |
| 49 | HG Fuse Set 11KV 200Amp 3 pole 3 phase |
| 50 | Wedge connector for 55sqmm conductor |
| 51 | Polycarbonate bird guard |
| 52 | Insu Disc polymer 11KV B&S 70KN |
| 53 | H/W/F(B&S) 70KN 3 Bolt |
| 54 | Lighting Arrestor 1KV 10KA STION Class |
| 55 | PIN Insul polymer 11Kv 20MM FRP DIA |
| 56 | HT Stay set complete |
| 57 | Stay clamp 150x 150mm RS Joist |
| 58 | Insulator stay HT |
| 59 | GI Standrad wire 7.10 SWG-7/3 25MM |
| 60 | GI Earthing pipe 40mm dia 3m Length |
| 61 | GI Bolts & nuts assorted dimension |
| 62 | GI Standrad wire birbed wire |
| 63 | GI Flats 25 x 3mm |
| 64 | Danger Board 11KV |
| 65 | CT W/O Name plate |
| 66 | Enamel Paint Yellow |
| 67 | Black paint with barrel |
| 68 | Laying of PCC M20 |
| 69 | PCC 1:3:6 |
| 70 | Inst 11KV Complete stay set with concrete |
| 71 | Earth chamber incl inst of earthing pipe |
| 72 | Laying 1.1KV Cable upto 120sqmm |
| 73 | Supply & erection GI Fencing with Gate |
| 74 | Supply & cmpg/fixing/conn termi AL35Lug |
| 75 | Sup/Inst 3.5/4C 16-35 Sqm Glnd/Al Term |
| 76 | 16 KVA, 11/0.4 KV Transformer |
| 77 | LT distribution box for 16 KVA sub-station with 63 A MCCB with Thermal Magnetic Relay Please Enable Macros to View BoQ information |
