|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | P/l of stone soling / RBM including all carriages. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:3:6 using 40mm nominal size aggregate. |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level TMTbars |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 8 | Suspended Floors |
| 9 | Walls |
| 10 | 15mm Plaster in 1:4 mix |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 13 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap incl. 10 litre low level flushing cistern Long pattern W.C Pan of size 580x440 mm |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 15 | P/f of bib cocks /Angle Cocks of 15mm nominal bore of quality like Essel or Equivalent |
| 16 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 32mm/25mm OD(SDR-7.4),i/c all necessary fittings and fixtures ,complete job |
| 17 | Providing and fixing PPR Unions PPR Union 32/25mm |
| 18 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of specific size, joints welded by angle iron of soecified size or flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 19 | Providing corrugated G. S. sheet surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete 0.40 mm thick |
| 20 | P/f of sewage pipes of class B of approved brand. |
| 21 | 100MM |
| 22 | P -Trap |
| 23 | D bend |
| 24 | P/f of ball valves 15mm nominal bore of approved quality |
| 25 | Providing and fixing of Cp grating 100mm dia. |
| 26 | Carriage of materials from source of supply to site of work |
| 27 | Sand aggregates by 15 KMS |
| 28 | Bricks 100KM |
| 29 | Provision for community information board and A4 size phtographs. Please Enable Macros to View BoQ information |
