|
| 1 | Supply and delivery of 1.5 Ton caapcity Split A.C. machine fitted with Scroll/Rotary Compressor, Rated cooling capacity-5280 W, Rated power input-1390 watts, BEE Rating-5.34, Star Rating- 4 star, Current drawn (Rated)-6.5 Amps, Fan speed control-5, Air flow-1010 CMH, Sound level (IDU)-30dB, wireless type remote control and both coil of IDU & ODU should be made of copper. [Make- O-General ASGG18CETB-B (R32) or equivalent of Mitshubishi Heavy Industries / Mitsubishi Electric/Brand must be approved by EIC] |
| 2 | Supply and delivery of 2 Ton or higher capacity Inverter Split A.C. machine fitted with Rotary Compressor, Rated cooling capacity-7040 Wor higher, Refrigerant : R410/ R32, BEE Rating-3.94 or higher, Star Rating 2 or higher, Maximum ambient tempareture : 55°C or higher, CFM : 1500 or higher, wireless type remote control and both coil of IDU & ODU should be made of copper, [Make - O-General ASGG24CPAB-B (R32) or equivalent Mitsubishi Electric/Mitsubishi Heavy Industries/Brand must be approved by EIC] |
| 3 | Supply and delivery of 2.5 Ton capacity Inverter Split A.C. machine fitted with Rotary Compressor, Rated cooling capacity-8800 W or higher, Refrigerant : R410/ R32, BEE Rating-4.74 or higher, Star Rating 3 or higher, Maximum ambient tempareture : 55°C or higher, CFM : 1630 or higher, wireless type remote control and both coil of IDU & ODU should be made of copper, [Make - O-General ASGG30CETB-B (R32) or equivalent Mitsubishi Electric/Mitsubishi Heavy Industries/Brand must be approved by EIC] |
| 4 | Installation, Testing & Commissioning of split type AC machine both indoor & outdoor unít with necessary fixing on wall (indoor unit & outdoor unit) as per direction of ElC by providing of 40x40x5 mm MS angle iiron frame with necessary anchoring facilty on one side for necessary support on outer wall /making pedestal by angle & flat with necessaery welding each other etc & Making hole for providing holding with outdoor unit by proper gauge GI nut bolt & washer with necessary painting by synthetic enamel paint two coat of one after another over one coat of RO primer or Providing of ISI marked bracket provide on wall by necessary providing of.100 mm MS / Gi Pastner arrangwenment not less than 6 (six) no for each unit. with making hole on wall with making necessary slopping maíntain & mending good damages as per direction of EIC. |
| 5 | Supply & Laying of1. Electric PVC Unarmoured flexible copper cable (4 core 2.5 Sqmm) (Make : Finolex/Havells/Polycab) 2. Copper pipe 5/8\\" & 1/4\\" for suction as required and wrapping the copper refrigerant pipe line with 26 SWG aluminium sheet.(Make : Rajco/Royku)3.Insulation Foam 5/8\\" & 1/4\\" thickness 0.9 mm with 9 mm thick nitrile insulation. |
| 6 | Supply and laying 20 mm UPVC pipe (Make : Finolex/Supreme/Ashirvad) for water drainage along with all fittings. |
| 7 | Overhauling of old machine indoor & outdoor unlt with copper pipe by skilled technician incl. outdoor bracket & all acessories part by part & store within hospital camus as per direction with agency's own workman, without damage of any Items. |
| 8 | Supply and delivery of 4 Core XLPE insulated & sheathed Armoured stranded Aluminium Conductor cables for working voltage up to 1100 Volts of following sizes.[Make:- Gloster/Havells/RR Kabel/KEI/As per choice of EIC] |
| 9 | 4 Core 35 Sqmm |
| 10 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. |
| 11 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : |
| 12 | 4 Core 35 Sqmm |
| 13 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : |
| 14 | 4 Core 35 Sqmm |
| 15 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required |
| 16 | 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC |
| 17 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 18 | 2.5 Sqmm |
| 19 | 4 Sqmm |
| 20 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 6 way [Enclosure 607716] Incomer:- 415 V 4 Pole 100 A MCB Isolator - 01 Nos Outgoing:- 240 V 1 Pole 6-32 A MCB [Breaking capacity 10kA & C characteristics]- 18 Nos [Make:- Legrand/Schneider/Seimens] |
| 21 | Supply & installation on existing single phase Timer DB comprising of 32 A DP MCB- 1 Nos [Make: L&T (Lauritz Knudsen)] , Digital time switch (Make: L&T (Lauritz Knudsen) cat AUTS02DIG00)- 2 Nos ,32 A DP power contactor- 2 Nos (Make : L&T (Lauritz Knudsen) 32 A type MNX 32-2P cat CS90241) ,3 possition toggle switch with suitable interconnection with copper wire. |
| 22 | Supply & installation of single phase Timer DB comprising of (2+10) way SPNMCBDB Enclosure (LTSD12N) [Make: L&T (Lauritz Knudsen)] ( Conceled in wall) , 32 A DP MCB [Make: L&T (Lauritz Knudsen)] , Digital time switch (Make: L&T (Lauritz Knudsen) cat AUTS02DIG00) ,32 A DP power contactor (Make : L&T (Lauritz Knudsen) 32 A type MNX 32-2P cat CS90241) ,3 possition toggle switch with suitable interconnection with copper wire. Please Enable Macros to View BoQ information |
