Tender For Repairing And Maintenance Work Including Painting For Outside And Inside Of Main Administrative Building, Red Heritage Building, Annex Building And Pump Room At West Bengal Survey Institute, Bandel, Hooghly---- Internal Electrical Installa, Hooghly-West Bengal

TDR : 54402760

Tender Notice
BOQ

18 Days Left

Hooghly , West Bengal

Tender Brief : Tender For Repairing And Maintenance Work Including Painting For Outside And Inside Of Main Administrative Building, Red Heritage Building, Annex Building And Pump Room At West Bengal Survey Institute, Bandel, Hooghly---- Internal Electrical Installa

Document Fees
Refer document

EMD
₹ 38330.0 /-

Tender Value
₹ 19.16 Lakhs /-

Submission Date
23-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.
2	Average run 8 Mtr [1(iii) / E-20 ]
3	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light /fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite /perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish
4	Average run 8 Mtr [2(a, iii) / E-9 ]
5	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish
6	On Board [ 3 (i) / E- 20 ]
7	4.5 mtr. [ 3 (iv) / E- 20 ]
8	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original
9	On Board [ 4 a(i) / E- 10 ]
10	Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
11	6 module 1(b)/E-17] ( 2x5A Plug Board )
12	Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-18]
13	Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [4(a)/E-17]
14	Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required [3(a)/E-17]
15	Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.Connections [5(b)/E-17]
16	Supply & Fixing of modular blanking Plate
17	Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire[ 5(a) / E-17]
18	Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc..[17 / E-19]
19	Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [22 /E-6]
20	Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [ 26 / E-7]
21	Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.
22	2+12 Way [Siemens Enclosure(8GB32102RC14) or equivalent model of Legrand/L&T] as approved by EIC.[ 13 / D- 9 & D-10 ] ( for switch board and 2x5A Plug Board)
23	2+8 Way [Siemens Enclosure(8GB32102RC10) or equivalent model of Legrand/L&T] as approved by EIC.[ 13 / D- 9 & D-10 ] ( for switch board )
24	Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ Schneider/ Crabtree/L&T/SIEMENS) as per direction of EIC. )
25	8 Way Make - Legrand, Enclosure-607717/Schneider ,Enclosure-A9HTND08/Crabtree, Enclosure- (DCDKTHODCW08) or equivalent cat of LT/Siemens as approved E.I.C] [ 14 / D- 10 ]
26	6 Way [Make - Legrand, Enclosure-607716/ Schneider, Enclosure-A9HTND06 /Crabtree, Enclosure- (DCDKTHODCW06 or equivalent cat of LT/Siemens as approved E.I.C] [ 14 / D- 10 ]
27	Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS as per direction of EIC.
28	8 Way ( Up to 160 A ) Make - Legrand, Enclosure 607914/Siemens-Enclosure-8GB31573RC)/Schneider-Enclosure-A9HVD08M/L&T, Enclosure- (LTVD08MGN) or equivalent cat of SIEMENS as approved by E.I.C] 15 / D- 11 ] (Three phase suuply to SFU for laboratory)
29	Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ]
30	63 A FP [ 6 / D- 5 ]
31	40 A DP [ 6 / D- 5 ]
32	Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS[ Make - Legrand / Schneider/L&T/Siemens) as per direction of EIC]
33	125 A [10/ D- 8 ] ( VTPN)
34	Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. ]
35	6-32 SP [ 7 / D- 6]
36	63 A TP [ 7 / D- 6 ]
37	32 A TP [ 7 / D- 6 ]
38	Supplying and fixing of Four Pole 300mA, 415V, 32A, AC type RCBO on din rail of existing DBs and necessary connections per GS [Make - L&T, Cat No. AUF3C403230] (for Lift)
39	Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [4(a)/D3]
40	Supplying and fixing Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [ Make Havells/HPL].
41	63 A [2(b)/D-1]
42	Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical / SPNDB enclosure with IP-42/43 as per GS
43	4/6/8/12 Way (Vertical) [16/D-12]
44	6 Way (Horizontal) [16/D-12]
45	8 Way (Horizontal) [16/D-12]
46	Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.
47	3 x 22/0.3 (1.5 sqmm)[ 1(b) / E-9 ]
48	2x(2.5 sqmm)+1x(1.5 sqmm)[1(s)/E-9] (for 1x16A Socket,1x 16A+1x6A Board and 2x5A Board)
49	2x(4 sqmm)+1x (2.5 sqmm) [ 1(v) / E- 9 ] (for Ac power at Conference/Seminar room )
50	2x(6 sqmm)+1 x (4 sqmm) [ 1(y) / E- 9 ] ( SPN DB)
51	4x(10 sqmm)+2x (6 sqmm) [ 1(d1) / E- 9 ] (for Power HTPN DB & 63A SFU in Laboratory)
52	Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works
53	20 mm size [ 7(a)/ E- 16 ]
54	25 mm size [ 7(b)/ E- 16 ]
55	Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.
56	19 mm dia 3 mm thick [ 6 (a)/ E- 3 ]
57	25mm dia 3 mm thick [ 7 (a)/ E- 3 ]
58	Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
59	175 mm x 100 mm x 65 mm [ 10 (b)/ E- 4 ]
60	Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [14(a)/E-5]
61	Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.[ 15(a)/ E- 5 ]
62	Supplying and fixing polythene pipe complete with fitings as necy. under ceiling / beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1 X 18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastnded at the load point end of the polythene pipe with fish wire (synchronizing with roof/ beam casting work of building construction)
63	19mm dia 3mm thick Polythene Pipe [ 1 (b)/ E- 2 ]
64	25mm dia 3mm thick Polythene Pipe [ 1 (c)/ E- 2 ]
65	Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
66	200 mm x 150 mm x 65 mm [11(d)/E-4]
67	175 mm x 100 mm x 65 mm [11(c)/E-4]
68	Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required
69	200 mm x 150 mm x 65 mm [12(d)/E-4]
70	175 mm x 100 mm x 65 mm [12(c)/E-4]
71	S & F solderless Copper socket by crimping of Copper wires.
72	a)1.5 Sq mm
73	b) 2.5 sq mm [9(i) / F-5]
74	c) 4 sq mm [9(ii) / F-5]
75	d) 6 sq mm [9(iii) / F-5]
76	e) 10 sq mm [9(iv) / F-5]
77	Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make---Gloster/KEI/Havells as approved by E.I.C]
78	2 Core 6 Sqmm ( Compound Light )
79	4 Core 35 Sqmm
80	4 Core 50 Sq. mm
81	Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish
82	From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.[ 5(i)/ F- 3 ]
83	Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. [ 5(ii)/ F- 3 ]]
84	Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [ 1(b)/ F- 2 ]
85	Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS
86	65 mm dia [11(e)/F-6]
87	Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
88	2 Core 6 Sq. mm [7(a)/F4]
89	4 Core 35 Sq. mm [7(c)/F4]
90	4 Core 50 Sq. mm [ 7(c)/F4]
91	Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials :
92	2 Core 6 Sq. mm [8(b)-ii /F5]
93	4 Core 35 Sq. mm [8(b)-xv /F5]
94	4 Core 50 Sq. mm [ 8(b- xvi) /F5]
95	Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.[ 14d/C-2 ]
96	Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit,“L” type (125mmx125mm)6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt.length.[ 17/C-2 ]
97	Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [16/C-2]
98	Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling. [ 22/D-13 ]
99	Fixing only lamp [11/C-2]
100	Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.[13/C-2]
101	Supply and delivery of twin Industrial box type LED luminaries incl. Supply of 2nos. 18W LED Tube(Mas LEDTube 1200mm 18W865 T8 I – 2100lm) [Make- Philips TMC 501 P 2xT-LED 22W P3242/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
102	Supply and delivery of single Industrial box type LED luminaries incl. Supply of 1nos. 18W LED Tube(Mas LEDTube 1200mm 18W865 T8 I – 2100lm) [Make- Philips TMC 501 P 1xT-LED 22W P3241/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
103	Supply of 36 W Surface mounted LED light fittings having 100 lm/Watt with glare free uniform illumination Incl. necessary connections as per direction of EIC. (make-CG LCTLSNE-36-FO-CDL Phillips/Havells/ Bajaj / Magik / Orient as approved by E.I.C ) (meeting/seminar room)
104	Supply of 10W LED bulkhead light fittings with die cast Al housing & IP65 protection Incl. connections as per direction of EIC. (Make-Crompton CIS-306-10-57-SL-DP-NBK/Havells/ Phillips / Bajaj / Magik / Orient as approved by E.I.C)
105	Supply of 9W LED bulb (Bajaj/CG/Philips/ wipro / Orient ) on existing batten holder
106	Supply and delivery of 1 nos. 18W Master LED Tube [Make- Philips/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
107	Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [10/E18]
108	Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite /perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections [18(a)/ E6]
109	Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]
110	Engraving the deptt. number with 10 mm lettering on the body as per GS. [ 24 (a) / C-3 ]
111	Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26(a)/C-3 ]
112	Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter
113	23cm (9\\") [28(a)/C-4]
114	30cm (12\\") [28(b)/C-4]
115	Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS
116	(12\\") [ 33/D-14 ]
117	Supply of ac ceiling fans of 1200mm sweep with burst-proof P2/S3 Capacitor complete with all accessories without regulator. ( Make - Usha-Striker or equivalent model of Havells/CG/Orient as approved by E.I.C)
118	Supply of heavy duty Exhaust fan(Make-EPC] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust incl. s&f louver shutter as per G.S. )
119	12\\"( 300mm ) Speed 920 RPM
120	9\\"( 230mm ) Speed 1370 RPM
121	Supplying & Fixing 240 V AC/DC superior type Ding-DongCall Bell (Anchor) on HW board incl. S&F HW board [ 20( a )/D-13 ]
122	Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]
123	Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]
124	Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]
125	Extra for treatment of soil by using salt & charcoal or coke for plate electrode [3(b)/G-2]
126	Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS
127	No.-4 SWG [5(a)(i)/G-2]
128	Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]
129	Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works as per GS [ 9 / J-1 ]
130	Add GST @18%:- Rs
131	Add LWC @1% Rs. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

West Bengal Tenders

Services Tenders

Painting Work Tenders

Painting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repairing And Maintenance Work Including Painting For Outside And Inside Of Main Administrative Building, Red Heritage Building, Annex Building And Pump Room At West Bengal Survey Institute, Bandel, Hooghly---- Internal Electrical Installa, Hooghly-West Bengal

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.
2	Average run 8 Mtr [1(iii) / E-20 ]
3	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light /fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite /perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish
4	Average run 8 Mtr [2(a, iii) / E-9 ]
5	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish
6	On Board [ 3 (i) / E- 20 ]
7	4.5 mtr. [ 3 (iv) / E- 20 ]
8	Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 5A 3 pin plug point incl. S&F 240 V 5A 3 pin flush type plug socket & piano key type switch (Anchor make) incl. S&F earth continuity wire, fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original
9	On Board [ 4 a(i) / E- 10 ]
10	Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
11	6 module 1(b)/E-17] ( 2x5A Plug Board )
12	Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [9(b)/E-18]
13	Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [4(a)/E-17]
14	Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required [3(a)/E-17]
15	Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy.Connections [5(b)/E-17]
16	Supply & Fixing of modular blanking Plate
17	Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire[ 5(a) / E-17]
18	Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc..[17 / E-19]
19	Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [22 /E-6]
20	Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [ 26 / E-7]
21	Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.
22	2+12 Way [Siemens Enclosure(8GB32102RC14) or equivalent model of Legrand/L&T] as approved by EIC.[ 13 / D- 9 & D-10 ] ( for switch board and 2x5A Plug Board)
23	2+8 Way [Siemens Enclosure(8GB32102RC10) or equivalent model of Legrand/L&T] as approved by EIC.[ 13 / D- 9 & D-10 ] ( for switch board )
24	Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS.( Make - Legrand/ Schneider/ Crabtree/L&T/SIEMENS) as per direction of EIC. )
25	8 Way Make - Legrand, Enclosure-607717/Schneider ,Enclosure-A9HTND08/Crabtree, Enclosure- (DCDKTHODCW08) or equivalent cat of LT/Siemens as approved E.I.C] [ 14 / D- 10 ]
26	6 Way [Make - Legrand, Enclosure-607716/ Schneider, Enclosure-A9HTND06 /Crabtree, Enclosure- (DCDKTHODCW06 or equivalent cat of LT/Siemens as approved E.I.C] [ 14 / D- 10 ]
27	Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS as per direction of EIC.
28	8 Way ( Up to 160 A ) Make - Legrand, Enclosure 607914/Siemens-Enclosure-8GB31573RC)/Schneider-Enclosure-A9HVD08M/L&T, Enclosure- (LTVD08MGN) or equivalent cat of SIEMENS as approved by E.I.C] 15 / D- 11 ] (Three phase suuply to SFU for laboratory)
29	Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ]
30	63 A FP [ 6 / D- 5 ]
31	40 A DP [ 6 / D- 5 ]
32	Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS[ Make - Legrand / Schneider/L&T/Siemens) as per direction of EIC]
33	125 A [10/ D- 8 ] ( VTPN)
34	Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. ]
35	6-32 SP [ 7 / D- 6]
36	63 A TP [ 7 / D- 6 ]
37	32 A TP [ 7 / D- 6 ]
38	Supplying and fixing of Four Pole 300mA, 415V, 32A, AC type RCBO on din rail of existing DBs and necessary connections per GS [Make - L&T, Cat No. AUF3C403230] (for Lift)
39	Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [4(a)/D3]
40	Supplying and fixing Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc [ Make Havells/HPL].
41	63 A [2(b)/D-1]
42	Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical / SPNDB enclosure with IP-42/43 as per GS
43	4/6/8/12 Way (Vertical) [16/D-12]
44	6 Way (Horizontal) [16/D-12]
45	8 Way (Horizontal) [16/D-12]
46	Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the 19mm/25mm prelaid polythene pipe/PVC rigid conduit as per GS.
47	3 x 22/0.3 (1.5 sqmm)[ 1(b) / E-9 ]
48	2x(2.5 sqmm)+1x(1.5 sqmm)[1(s)/E-9] (for 1x16A Socket,1x 16A+1x6A Board and 2x5A Board)
49	2x(4 sqmm)+1x (2.5 sqmm) [ 1(v) / E- 9 ] (for Ac power at Conference/Seminar room )
50	2x(6 sqmm)+1 x (4 sqmm) [ 1(y) / E- 9 ] ( SPN DB)
51	4x(10 sqmm)+2x (6 sqmm) [ 1(d1) / E- 9 ] (for Power HTPN DB & 63A SFU in Laboratory)
52	Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works
53	20 mm size [ 7(a)/ E- 16 ]
54	25 mm size [ 7(b)/ E- 16 ]
55	Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS.
56	19 mm dia 3 mm thick [ 6 (a)/ E- 3 ]
57	25mm dia 3 mm thick [ 7 (a)/ E- 3 ]
58	Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works
59	175 mm x 100 mm x 65 mm [ 10 (b)/ E- 4 ]
60	Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [14(a)/E-5]
61	Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.[ 15(a)/ E- 5 ]
62	Supplying and fixing polythene pipe complete with fitings as necy. under ceiling / beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1 X 18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastnded at the load point end of the polythene pipe with fish wire (synchronizing with roof/ beam casting work of building construction)
63	19mm dia 3mm thick Polythene Pipe [ 1 (b)/ E- 2 ]
64	25mm dia 3mm thick Polythene Pipe [ 1 (c)/ E- 2 ]
65	Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works
66	200 mm x 150 mm x 65 mm [11(d)/E-4]
67	175 mm x 100 mm x 65 mm [11(c)/E-4]
68	Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required
69	200 mm x 150 mm x 65 mm [12(d)/E-4]
70	175 mm x 100 mm x 65 mm [12(c)/E-4]
71	S & F solderless Copper socket by crimping of Copper wires.
72	a)1.5 Sq mm
73	b) 2.5 sq mm [9(i) / F-5]
74	c) 4 sq mm [9(ii) / F-5]
75	d) 6 sq mm [9(iii) / F-5]
76	e) 10 sq mm [9(iv) / F-5]
77	Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured stranded Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make---Gloster/KEI/Havells as approved by E.I.C]
78	2 Core 6 Sqmm ( Compound Light )
79	4 Core 35 Sqmm
80	4 Core 50 Sq. mm
81	Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish
82	From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.[ 5(i)/ F- 3 ]
83	Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. [ 5(ii)/ F- 3 ]]
84	Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [ 1(b)/ F- 2 ]
85	Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings as per GS
86	65 mm dia [11(e)/F-6]
87	Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
88	2 Core 6 Sq. mm [7(a)/F4]
89	4 Core 35 Sq. mm [7(c)/F4]
90	4 Core 50 Sq. mm [ 7(c)/F4]
91	Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing materials :
92	2 Core 6 Sq. mm [8(b)-ii /F5]
93	4 Core 35 Sq. mm [8(b)-xv /F5]
94	4 Core 50 Sq. mm [ 8(b- xvi) /F5]
95	Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.[ 14d/C-2 ]
96	Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit,“L” type (125mmx125mm)6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt.length.[ 17/C-2 ]
97	Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [16/C-2]
98	Supply & Fixing angular batten holder (Anchor) on 75mm dia PVCround block / round bakelite on wall/ceiling. [ 22/D-13 ]
99	Fixing only lamp [11/C-2]
100	Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.[13/C-2]
101	Supply and delivery of twin Industrial box type LED luminaries incl. Supply of 2nos. 18W LED Tube(Mas LEDTube 1200mm 18W865 T8 I – 2100lm) [Make- Philips TMC 501 P 2xT-LED 22W P3242/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
102	Supply and delivery of single Industrial box type LED luminaries incl. Supply of 1nos. 18W LED Tube(Mas LEDTube 1200mm 18W865 T8 I – 2100lm) [Make- Philips TMC 501 P 1xT-LED 22W P3241/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
103	Supply of 36 W Surface mounted LED light fittings having 100 lm/Watt with glare free uniform illumination Incl. necessary connections as per direction of EIC. (make-CG LCTLSNE-36-FO-CDL Phillips/Havells/ Bajaj / Magik / Orient as approved by E.I.C ) (meeting/seminar room)
104	Supply of 10W LED bulkhead light fittings with die cast Al housing & IP65 protection Incl. connections as per direction of EIC. (Make-Crompton CIS-306-10-57-SL-DP-NBK/Havells/ Phillips / Bajaj / Magik / Orient as approved by E.I.C)
105	Supply of 9W LED bulb (Bajaj/CG/Philips/ wipro / Orient ) on existing batten holder
106	Supply and delivery of 1 nos. 18W Master LED Tube [Make- Philips/CG / Bajaj / Wipro/Havells/Magik / Orient as approved by E.I.C]
107	Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. [10/E18]
108	Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite /perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections [18(a)/ E6]
109	Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]
110	Engraving the deptt. number with 10 mm lettering on the body as per GS. [ 24 (a) / C-3 ]
111	Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26(a)/C-3 ]
112	Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter
113	23cm (9\\") [28(a)/C-4]
114	30cm (12\\") [28(b)/C-4]
115	Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS
116	(12\\") [ 33/D-14 ]
117	Supply of ac ceiling fans of 1200mm sweep with burst-proof P2/S3 Capacitor complete with all accessories without regulator. ( Make - Usha-Striker or equivalent model of Havells/CG/Orient as approved by E.I.C)
118	Supply of heavy duty Exhaust fan(Make-EPC] of followinng sizes after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust incl. s&f louver shutter as per G.S. )
119	12\\"( 300mm ) Speed 920 RPM
120	9\\"( 230mm ) Speed 1370 RPM
121	Supplying & Fixing 240 V AC/DC superior type Ding-DongCall Bell (Anchor) on HW board incl. S&F HW board [ 20( a )/D-13 ]
122	Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]
123	Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]
124	Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]
125	Extra for treatment of soil by using salt & charcoal or coke for plate electrode [3(b)/G-2]
126	Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS
127	No.-4 SWG [5(a)(i)/G-2]
128	Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]
129	Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works as per GS [ 9 / J-1 ]
130	Add GST @18%:- Rs
131	Add LWC @1% Rs. Please Enable Macros to View BoQ information

Tender For Repairing And Maintenance Work Including Painting For Outside And Inside Of Main Administrative Building, Red Heritage Building, Annex Building And Pump Room At West Bengal Survey Institute, Bandel, Hooghly---- Internal Electrical Installa, Hooghly-West Bengal

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us