|
| 1 | To determine Illumination of a surface for a Drawing Room by means of lux meter. |
| 2 | To determine candle power of a lamp in comparison to standard C.P. of lamp by optical bench method. |
| 3 | To verify the Inverse Square Law and compare the difference in output luminescence of incandescent, fluorescent and compact fluorescent lamps. |
| 4 | To Study of Sodium vapour lamp, Mercury vapour lamp, CFL with their connections and the technical specification. |
| 5 | Trainer Kit DC Series Motor, Brake Drum & Pulley,Spring Balance , Weights, Tachometer, Ammeter, Voltmeter, Multimeter, Clampmeter, Rheostat , Electrical Load Box, DC Gen, Braking Setup |
| 6 | Electric Arc Welding Setup |
| 7 | Trainer Kit Setup of Induction Heater |
| 8 | Experiment to compare power consumption of different types of TL with electromagnetic ballast, electronic ballast and LED lamps by direct measurements and estimate energy saving. |
| 9 | Experiment to determine the reduction in power consumption in star mode operation of Induction motor compared to delta mode at different load conditions. |
| 10 | Experiment to estimate energy saving by improving power factor using PFC/APFC for an electrical load. |
| 11 | Experiment to estimate energy saving by improving load factor for an establishment. |
| 12 | Perform experiment to determine the reduction in power consumption by replacement of Fans and regulators in a class room / laboratory |
| 13 | Prepare series testing board for testing fan or other electrical gadgets. |
| 14 | Select the electric wire using measuring and testing instruments for particular applications. |
| 15 | Study and Identify cables (PVC, XLPE, and VIR) and catenary cable of different current rating. |
| 16 | Prepare wiring installation on a board from the commencement of supply showing energy meter, MCB, control of one lamp, one fan and one socket from one switch board in PVC surface conduit wiring system. |
| 17 | Prepare wiring installation on a board showing control of one lamp, one fan and one socket from one switch board using Batton wiring system. |
| 18 | Control one lamp from two different places using PVC surface conduit wiring system. |
| 19 | Test wiring insulation using megger. |
| 20 | Measure earth resistance using earth megger |
| 21 | Measurement of three phase energy using static energy meter which can show maximum demand, reactive power, TOD in addition to active power. |
| 22 | Measurement of energy using CT and PT |
| 23 | Perform experiment to measure solar radiation using Pyranometer on tilted surface at different angles of inclination and plot radiation vs. time characteristics for certain duration. |
| 24 | Perform experiment to plot I-V characteristics of photovoltaic cell module and find out the solar cell parameters (O.C. voltage, Short circuit current, Voltage-current-power at Maximum Power point, Fill factor, Efficiency). |
| 25 | Identify & study the specified components of a 0.3 KW Small Wind Turbine (SWT) system. (Indoor type). |
| 26 | Set up the solar PV plant to produce electricity. |
| 27 | Display Board of samples of Overhead Conductors, Underground Cables |
| 28 | Samples of Transmission Line Insulators. |
| 29 | Demonstrate various system faults by D.C. network analyzer |
| 30 | Measurement of three-phase line and phase voltage and measurement of three-phase power by two wattmeter method |
| 31 | Inductance measurement by Anderson's Bridge Trainer Kit. |
| 32 | Multimeter |
| 33 | Clamp Meter |
| 34 | Stop WATCH |
| 35 | Distance meter Please Enable Macros to View BoQ information |
