|
| 1 | M.S. Channel, 125x65 mm |
| 2 | M.S. Channel, 150x75 mm |
| 3 | M.S. Channel, 100 x 50 mm |
| 4 | M.S. Plate, 6 mm |
| 5 | M.S. Angle, 75x75x6 mm |
| 6 | M.S. Angle, 65x65x6 mm |
| 7 | M.S. Angle, 50x50x6 mm |
| 8 | M.S. Flat, 40x6 mm |
| 9 | M.S. Flat, 50x6 mm |
| 10 | M.S. Shaft of 50mm dia. |
| 11 | Thread cutting 2 TPI including fine finishing and making hole in one end as per direction of size 50 mm dia. |
| 12 | Shaft pin, 16mm |
| 13 | Steel wire rope, 16 mm |
| 14 | \\"U\\" Clamp 16mm |
| 15 | C.C. Counterweight circular type 400mm dia. Around 100 mm thick with 25 mm dia hole at centre and two handles for carrying weight of 30 Kg each as per direction (machine finished) |
| 16 | Counter weight holder |
| 17 | Separator Stud with tube, nuts etc. |
| 18 | M.S. Electrode, 8 SWG |
| 19 | M.S. Base plate, 300x300x10 mm |
| 20 | M.S. Base Plate, 300 x300x12mm |
| 21 | M.S. Lock plate, 300x300x8 mm |
| 22 | M.S. Lock Plate, 300x300x10 mm |
| 23 | Clamp for lock plate |
| 24 | H.D. Thrust ball bearing, 50 mm |
| 25 | H.D. Thrust ball bearing, 65 mm |
| 26 | C.I Boss with internal thread cutting 2TPI making groove for bearing slot for lock plate &1.5’’drill for providing handle as per direction size:125 mmX 175 mm |
| 27 | C.I Boss with internal thread cutting 2TPI making groove for bearing slot for lock plate &1.5’’drill for providing handle as per direction size:125 mmX 150 mm |
| 28 | Distant tube with pin, 75x12 mm |
| 29 | ‘J’- type Rubber seal, 75 mm |
| 30 | ‘J’- type Rubber seal, 125 mm |
| 31 | C.I. Roller, 100 x 150 mm |
| 32 | ‘F’- shaped roller brakt., 100x150 mm |
| 33 | Roller pin, 16 mm |
| 34 | Nuts & bolts (Assorted size) |
| 35 | M.S. Washer (Assorted size) |
| 36 | G.I. Pipe, 25 mm |
| 37 | Gas cutting nozzle |
| 38 | Arc welding cable 400/600 Amp |
| 39 | Arc welding holder, 400/600 Amp |
| 40 | Gas cutting hose, 12mm dia (Red and Black) |
| 41 | Gas cutting kit |
| 42 | Steel wire brush |
| 43 | Painting brush, 3” |
| 44 | Red oxide primer |
| 45 | Antisol red oxide paint |
| 46 | W.B. grease |
| 47 | Lubricating Oil |
| 48 | Turpentine oil |
| 49 | Jati Bamboo |
| 50 | Hire charge of crane with capacity 35 Ton with operator excluding fuel. |
| 51 | Charges of Skilled labour to be engaged for fabrication works by Arc welding & Gas cutting |
| 52 | Charges of Ordinary Labours for Loading/unloading of Sluice gate materials and cleaning of Sluice gate channels etc. Please Enable Macros to View BoQ information |
