|
| 1 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(DSR No.17.31) |
| 2 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests (DSR No.17.1.1) |
| 3 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required .W.C. pan with ISI marked white solid plastic seat and lid. (DSR No.17.3.1) |
| 4 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings,standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 ltr VC automatic flushing cistern (DSR No. 17.5.1) |
| 5 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings,standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of three half stall urinals with 10 litre PVC automatic flushing cistern (DSR No. 17.5.3) |
| 6 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR No.17.7.4) |
| 7 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm bowl depth 200 mm (DSR No.17.10.2.1) |
| 8 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Semi rigid pipe 32 mm dia (DSR No.17.28.1.1) |
| 9 | Providing and fixing soil, waste and vent pipes 100 mm dia Sand cast iron S&S pipe as per IS: 1729 (DSR No.17.35.1.1) |
| 10 | Providing and fixing soil, waste and vent pipes 75 mm diameter Sand cast iron S&S pipe as per IS: 1729 (DSR No.17.35.2.1) |
| 11 | Providing and fixing heel rest sanitary bend 100 mm dia Sand cast iron S&S as per IS - 1729 (DSR No.17.40.1.1) |
| 12 | Providing and fixing heel rest sanitary bend 75 mm dia Sand cast iron S&S as per IS - 1729 (DSR No.17.40.2.1) |
| 13 | Providing and fixing terminal guard 100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.56.1.1) |
| 14 | Providing and fixing terminal guard 75 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.56.2.1) |
| 15 | Providing and fixing collar 100 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.57.1.1) |
| 16 | Providing and fixing collar 75 mm Sand cast iron S&S as per IS - 1729 (DSR No.17.57.2.1) |
| 17 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100 mm (DSR No.17.58.1) |
| 18 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 75 mm (DSR No.17.58.2) |
| 19 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729 (DSR No.17.60.2.2) |
| 20 | Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) 100 mm dia (DSR No.17.61.1) |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 15 mm dia nominal bore (DSR No.18.10.1) |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm dia nominal bore (DSR No.18.10.2) |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps including making good the walls etc. concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore (DSR No.18.11.1) |
| 24 | 20 mm dia nominal bore (DSR No.18.11.2) |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 20 mm dia. nominal bore. (DSR No.18.12.2) |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc 25 mm dia. nominal bore (DSR No.18.12.3) |
| 27 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore (DSR No.18.13.1) |
| 28 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore (DSR No.18.18.2) |
| 29 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore (DSR No.18.21.2.1) |
| 30 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore (DSR No. 18.46.1) |
| 31 | 20 mm nominal bore (DSR No. 18.46.2) |
| 32 | 25 mm nominal bore (DSR No. 18.46.3) |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (DSR No.18.48) |
| 34 | Providing and fixing PTMT bib cock of approved quality and colour Make Viking 15 mm nominal bore, 90 long, weighing not less than 93 grms (DSR No. 18.54.4) |
| 35 | Providing and fixing PTMT bib cock of approved quality and colour Make Viking 15 mm nominal bore, 165mm long. Weighing not less than 110 gms. (DSR No. 18.54.3) |
| 36 | Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms (DSR No. 18.55.1) |
| 37 | Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms (DSR No. 18.55.3) |
| 38 | Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms (DSR No. 18.57.1) |
| 39 | Providing and fixing PTMT angle stop cock 15 mm nominal bore weighing not less than 85 grms Make Prayag (DSR No. 18.63) |
| 40 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (DSR No. 18.76.1) |
| 41 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof (DSR No. 18.77.1) |
| 42 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff 150 mm diameter mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete (DSR No.19.1.2) |
| 43 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design 150 mm diameter S.W. pipe (DSR No.19.2.2) |
| 44 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame o f 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.4.2) |
| 45 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No. 19.7.1.1) |
| 46 | Extra for depth for manholes Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR No.19.8.1.1) |
| 47 | Providing and fixing C.P. Jet complete in all respects (NSI) |
| 48 | Providing and fixing of tank nipple 3/4\\" complete in all respects (NSI) |
| 49 | Providing and fixing gun metal gate valve 20 mm complete in all respects (NSI) |
| 50 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:5:10 with graded stone aggregate 40 mm nominal size). (DSR No.4.1.10) |
| 51 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (DSR No. 4.1.3) |
| 52 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4coarse sand) (DSR No.6.1.1) |
| 53 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3fine sand) (DSR No.13.7.2) Please Enable Macros to View BoQ information |
