Tender For Periodical Repair/Maintenance Of Road From Rajnagar-Ekinpur Road To Baldakhal-S (L-1.705 Km) Under Rajnagar Sub-Division, Pwd(Randb) During The Year 2025-26. / Sh: Pot Hole Repairing, Re-Carpeting, Tack Coat, Seal Coat Etc. Ch. From 0.00 K, Rajnagar-Tripura
TDR : 54401287
Tender Notice
BOQ
Expired
Rajnagar
Tripura
Tender For Periodical Repair/Maintenance Of Road From Rajnagar-Ekinpur Road To Baldakhal-S (L-1.705 Km) Under Rajnagar Sub-Division, Pwd(Randb) During The Year 2025-26. / Sh: Pot Hole Repairing, Re-Carpeting, Tack Coat, Seal Coat Etc. Ch. From 0.00 K
Name of Work:- Periodical repair/maintenance of road from Rajnagar-Ekinpur road to Baldakhal-S (L-1.705 Km) under Rajnagar Sub-Division, PWD(RandB) during the year 2025-26. / SH: Pot hole repairing, Re-carpeting, Tack coat, Seal coat etc. Ch. from 0.00 Km to 1.705 Km.
Sl. No.
Item Description
1
Maintenance of bituminous surface roadRepair to pot holes by removal of failed material, trimming the sides to vertical and levelling the bottom, cleaning the same with compressed air or any appropriate method, filled with 75 mm B.M, after applying bitumen emulsion prime coat at the bottom and bitumen emulsion tack coat on sides and on bottom as per MoRD technical specification Clauses 1900, 502, 503 and 504.
2
Tack coat using hot straight run bitumen of grade VG-30 on bituminous surfaceProviding and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm.
3
20 mm thick Open-Graded Premix Carpet using Bituminous (Viscosity grade / modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508Case - II: By Mechanical MeansBitumen of VG-30
4
Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.A. By Manual Meansi) Case - IV : Type D (premix with fine sand)a) Bitumen of VG-30
5
Construction of Embankment with Material Obtained from Borrow PitsConstruction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per MoRD Technical Specification Clause 301.5
6
Surface Drains Construction of unlined surface drains of average cross-sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.(i) Surface Drains in Ordinary Soil a) Manual Means
7
Maintenance of Earthen shoulder (Stripping of excess soil)Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
