|
| 1 | labour for site clerance |
| 2 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 3 | Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 4 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 6 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 10 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size) |
| 11 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 17 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 18 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 19 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/ |
| 20 | Providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 21 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 22 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 23 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 24 | Providing 12mm cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I |
| 25 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I |
| 26 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I |
| 27 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/ |
| 28 | ADD. CARRIAGE COST OF MATERIALS (1) CEMENT = steel LEAD 8 KM |
| 29 | (2) STONE CHIPS LEAD 15 KM |
| 30 | (4) SAND LEAD FROM 20 KM |
| 31 | (5) BRICK LEAD FROM 75 KM |
| 32 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. xtra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B |
| 33 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 34 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E |
| 35 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3 ) in foundation and plintn with approvecl quality of stone chips 20 mm to 6 mm' lsize qraded and clean ccarse sand of F M 2 5' to 3 including l joint shuttering' mixing cement concrete in mixer and lptucing in position, vibrating, striking, curing (but excluding the icost of renifr ,rcement, taxes and royalty all complete' as per specification and direction of E/I |
| 36 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3 ) in foundation and plintn with approvecl quality of stone chips 20 mm to 6 mm' lsize qraded and clean ccarse sand of F M 2 5' to 3 including l joint shuttering' mixing cement concrete in mixer and lptucing in position, vibrating, striking, curing (but excluding the icost of renifr ,rcement, taxes and royalty all complete' as per specification and direction of E/I |
| 37 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 38 | Reinforcement cement concrete work in walls (any thickness), including attached pilasters, buttersses, plinth and string cource, filleets, columns, pillars, piers, cource, filleets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarce sand (zone III) : 3 Graded stone aggregate 20 mm nominal size) |
| 39 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mm nominal size) |
| 40 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 41 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mm nominal size) |
| 42 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone III) : 3 graded stone aggregate 20 mm nominal size) |
| 43 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 44 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 45 | Providingandlayinginpositionspecified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishingandreinforcement Allworkuptoplinth level : 1:1.5:3(1 Cement : 1.5Coarcesand(zone-III) : 3 Gradedstoneaggregate20mmnominal size)- At Foundation |
| 46 | Providing Tor steel reinforcement of 10mm. ,12mm&16mmdia. barsasper approveddesignanddrawingexcluding carriageofM.S.barstoworksite,cutting, bendingandbindingwithannealedwire withcostofwire,removalofrustplacing therods inpositionall completeasper buildingspecificationanddirectionofE/l. TMT Fe 500 (a) 10 mm dia. |
| 47 | Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 48 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and building specification and direction and E/I. |
| 49 | Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 50 | Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 51 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 52 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 53 | Providing 2 coats of Synthetic Enamel Paint of approved shade and make over steel surface grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I. |
| 54 | S/F/F 40mm high vitreous white glazed earthen E.WC with 'P' Trap of Parry |
| 55 | Supplying, fitting and fixing flat back or angular, lipped front vitreous white glazed earthen ware urinal of ‘Hindustan \\"Parry\\" or any other approved I.S.S make with 5 liters capacity C.I. automatic fulsing cistern of reliance for any other I.S.S. approved make with all fittings with C.I.or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400grams, 15mm P.V.C. connection pipe 450mm longwith brass coupling at both ends and doing plumber joints including painting of exposed part with two coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/I. |
| 56 | Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S. approved make supported on painted C.I. or R.S. brackets 32mm C.I.brass waste, 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 57 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 58 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 59 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 60 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 61 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 62 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 63 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length |
| 64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 65 | Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole |
| 66 | Providing and fixing PVC pie fiting with all assosreise 110 mm Door Tee PVC |
| 67 | 110mm Plan Band PVC |
| 68 | 110 mm Door Bend PVC |
| 69 | 110 mm 45 degree offset PVC |
| 70 | 110 mm Cowel PVC |
| 71 | 110 mm plain Trap PVC |
| 72 | Providing fitting and fixing PVC water stroge Tank as per direction of E/I |
| 73 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 15 mm Dia |
| 74 | 20 mm Dia |
| 75 | 25 mm Dia |
| 76 | 32 mm dia |
| 77 | Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm internal dimension having 250 mm wall thickness in cement mortar ( 1 : 6 ) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm C.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. ( 1 : 3 : 6 ) in foundation and refilling all complete as per specification and direction of E/I. |
| 78 | Supplying brick bat and filling in sokpit as per specification and direction of E/I |
| 79 | Add carriage cost of Materialas I) Sand lead 25 km |
| 80 | chips lead 20 km |
| 81 | bricks lead 75 km |
| 82 | cement lead 10 km |
| 83 | steel lead 10 km |
| 84 | Wring for light point/exhaust fan point /call bell point with 1.5 sq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitale GI box etc as requried |
| 85 | Twin control Point in PVC conduit, with piano type switch:- Wring for twin control point with 1.5 aq. mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, 2 way piano type switch, phenolic laminated sheet with sutible size PVC/MS box etc as requried |
| 86 | Power plug wring in PVC conduit (2x4sqr. Mm) :- wring for Light/power plug with (2x4 sqr. Mm FR PVC insulted cpper conductor single core in surface/recessed PVC conduit, along with 1 no. 4 sq. mm FR PVC insulated copper conductor single core for loop earthing etc as required. |
| 87 | Circuit /submain wiring in PVC conduit:- Wiring for circuit/ submain wiring along with earth wire with the following size of FR PVC in insulted cpper conductor single core in surface/ recessed PVC conduit as required (2x 1.5 sq. mm + 1x1.5 sq. mm) |
| 88 | (2x 2.5 sq. mm + 1x2.5 sq. mm) |
| 89 | S/F light plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps mdular socket outlet and 5/6 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building ) |
| 90 | S/F light plug point with modular accessorise:- Supplying and fixing suitble GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc. as requried ( for light plug to be uded in non residential building ) |
| 91 | Supplying and fixing of folowing size of PVC conduit of PVC conduit along with accessores in surface/ recess including citting the wall and making good the same in case of recessed conduit as requied. |
| 92 | Supplying and fixing of folowing modular switch / scoket on the existing mdular lpate & switch box including connections but excluding modlar plate etc. as required 5/6 amps, one way switch |
| 93 | 5/6 amps, 3 pin socket outlet |
| 94 | 15/16 amps, 6 pin socket outlet |
| 95 | Supplying and fixing of folowingsize/ modules, GI box along with modular base & coverplate for modular switches in recess etc as required 1 or 2 module(78mm x 78mm x 45mm) |
| 96 | supplying and fixing Batte / Angle holder including connection etc as required |
| 97 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 cvolts on surface / recess, complete with tinned copper bus bar, neutral bus bar din bar, inter connections, powder painted including earthing etc. as requred ( but without MCB/TCCB/Isolator) 4 Way single door |
| 98 | Supplying and fixing 6 amps to 32 amps rating 240 volts, 10 KA, \\"B\\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, esting and commissioning etc as required 6/32 amps,single pole \\"B\\" series |
| 99 | Supplying and fixing following rating four pole 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 100 | providing and fixing G.I tape 20mm x 3mm thick on parapet or surface of wall for lighting conductor complete as required ( for horizontal run) |
| 101 | Supplying and fitting and fixing 9/10 watt LED Bulb |
| 102 | Supplying and fitting and fixing 60 Watt LED Street light |
| 103 | Drilling in all kinds of soil and rock in rural area for installation of India Mark -II hand pump with D.T.H rig all complete, including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making 125mm/115mm dia boring and cost of transporting charges of rig machine and other vehicle up to site of the work as per specification and direction Of E/I (A) From 0-30meter depth below G.L |
| 104 | (B) Frome 31 meter to 170 meter |
| 105 | Cost of 125 mm dia( 140mm O.D ) Blue UPVC casing pipe as per IS 12818 /2010 with latest amendment Including all taxes, royalty etc.all complete. |
| 106 | Supplying labour and equipment’s including 125mm dia. G.I. cap and fitting, fixing over the T/W properly and taking it out as per direction of E/I (The cap will be the property of contractor) |
| 107 | Supplying all toos equipments & Labour & doing washing , flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I ( Basic rate) |
| 108 | Supplying all tools equipment and labour and lowring 32mm dia medium quilaty pipe drilled tube well in 3 meter length all complete as per direction of E/I |
| 109 | S/F/F of2H.P Sumersuble pumpset head as 135 meter all complete job as direction of E/I |
| 110 | providing & fixing suitble single threaded mild steel cap or spot welded plate to top of bore well hausing / casing pipe ….. Do completed job direction of E/I |
| 111 | S/F/F/ lowering 32mm dia G.I pipe do … do all complete job as direction of E/I |
| 112 | S/F/F 3 core 2.5 squar flat copper sumersuble cable……. Do …. Do all complete job as direction of E/I |
| 113 | Supplying for 10 sqr 2 core aluminium conductor cable for pole connection to sumersuble motor stater ……. Do …. Do all complete job as direction of E/I |
| 114 | Supplying ,flat flexible submersible cable with copper conductor PVC insuleted & PVC sheathed as per IS:7098 |
| 115 | supplying Fitting & fixing make 1.5 H.P Submersible pump 150mm Dia (with Bronze impleller)upto 8 stage |
| 116 | supplying Fitting & fixing fully Automatic star delta stater to oprete induction motor working on415Volt 3Phase 50HZ with No Volt coil over load element ON-OFF push bottons with necessary materials and connected to supply, etc complete stater with original sheet steel incloser as per IS:3914 |
| 117 | Providing &commissioning 5KVA stabilizer of approved ISI marked (range 220V - 460V) with cable changer over switch for submersible pump including complete job |
| 118 | add S/B & PHOTOGRAPHY |
| 119 | Add . 18 % GST |
| 120 | add 1 % labour cess Please Enable Macros to View BoQ information |
