|
| 1 | Drilling in all kinds of soil & rock for installation of submersibble pump set with D.T.H. rigs as complete including supply all materials, labour, tools and plants, drilling air rigs,air compressor and equipments as well as fuel, lubricants for making 200 mm x 150 mm dia boring etc. and tranporting rig machine & other vehicles up to site of work as per specification and direction of E/I a) 0 to 50 Mtrs |
| 2 | b) 50 Mtrs. to 250 Mtrs |
| 3 | Providing and lowering 200 mm dia ( 6 mm wall thickness) E.R.G.H.S black pipe of approved make ( heave duty) as per standard specification including providing all materilas, labour and equipments, cutting threading and supplying extra socket if required for casing all complete as per specification and direction of E/I |
| 4 | Supplying all materials , labour, tools & plants equipments 200 mm dia M.S cap for fitting and fixing the same over 200 mm dia casing pipe etc all complete as per direction of E/I |
| 5 | Construction of Bore well Brick Masonry Protection Chambe |
| 6 | i) 1 HP (DC Pump) with 900 WP minimum watt P.V. Panel as MNRE pump head Max Shut-off head up to 120 mtrs. For higher or lower head or in between various modules output could be decided on prorates basis. (As per latest guide line of MNRE) |
| 7 | Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load , Labours etc. complete as directed. |
| 8 | Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019) |
| 9 | Provision of solar night lamp. |
| 10 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I |
| 11 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 13 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3 ) in foundation and plintn with approvecl quality of stone chips 20 mm to 6 mm' lsize qraded and clean ccarse sand of F M 2 5' to 3 including l joint shuttering' mixing cement concrete in mixer and lptucing in position, vibrating, striking, curing (but excluding the icost of renifr ,rcement, taxes and royalty all complete' as per specification and direction of E/ |
| 14 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3 ) in foundation and plintn with approvecl quality of stone chips 20 mm to 6 mm' lsize qraded and clean ccarse sand of F M 2 5' to 3 including l joint shuttering' mixing cement concrete in mixer and lptucing in position, vibrating, striking, curing (but excluding the icost of renifr ,rcement, taxes and royalty all complete' as per specification and direction of E/I |
| 15 | Providing P.C.C.M - 200 with nominal mix of (1:1.5:3 ) in foundation and plintn with approvecl quality of stone chips 20 mm to 6 mm' lsize qraded and clean ccarse sand of F M 2 5' to 3 including l joint shuttering' mixing cement concrete in mixer and lptucing in position, vibrating, striking, curing (but excluding the icost of renifr ,rcement, taxes and royalty all complete' as per specification and direction of E/I |
| 16 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I |
| 17 | Providing Earth filling in Foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. |
| 18 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I I) CEMENT + ROD LEAD 20 KM |
| 19 | II) sand lead 20 km |
| 20 | chips lead 20 km |
| 21 | Providingstructural steel galvanisedtubular hollowsectionwork intrusses,othersimilar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erectingand fixing in position , making riveted/bolted /welded connections andone coat of anticorrosive paintandover it twocoatofalloilpainting& ForStructure(PLUS)Providingandapplying materials&labour for2%hotdipgalvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv)preferablyTATAstructuralsectionetc includingnessarynut bolt completeasper approved drawing |
| 22 | Providing structural steel work in trusses other similar trussedpurlinsandmembers with bracing gusset plates etc as per detaileddesignanddrawingor asdirected by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connectionsonecoat of anticorrosivepaint and over it two coats of oil painting etc complete (MJP 2021-2022 Sec F Item 6) |
| 23 | Materials and labour for vinyl painting of matter given by department in different color (As per Market Rate) |
| 24 | Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank(DWSD item No-01 M) |
| 25 | Transportation Charge |
| 26 | Lifting of 2000 Litrs Capacity Tank up to 4.5m height with lifting tools with rope and labour |
| 27 | Making hole in Tank |
| 28 | Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc |
| 29 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. (DWSD-3.1.1.1) |
| 30 | Dismantlingplaincementconcretework including stacking serviceable m |
| 31 | Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality o |
| 32 | Manufacture, supply and Delivery of following Nominal dia UPVC column 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm |
| 33 | wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm |
| 34 | Providing and supplying High Density Polyethylene pipe (HDPE pipe) 63 mm HDPE Pipe |
| 35 | 50 mm HDPE Pipe- |
| 36 | 32 mm HDPE Pipe- |
| 37 | 20 mm HDPE Pipe- |
| 38 | Providing and fixing Gun Metal Gate valve with C I wheel of approved qualit 50 mm dia . |
| 39 | 65 mm dia . |
| 40 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory |
| 41 | excluding transportation, taxes and duties. PE-80 , PN- 10 8 Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper 50 mm HDPE Pipe |
| 42 | 65 mm HDPE Pipe |
| 43 | 65 mm HDPE Pipe |
| 44 | 50 mm HDPE Pipe |
| 45 | 32 mm HDPE Pipe |
| 46 | 20 mm HDPE Pipe |
| 47 | Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 |
| 48 | (Part 1/2004) ISI Mark /medium quality in Stand Post. 10Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes |
| 49 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. DWSD 3.1.13 (1) Elbow(a) 15 mm dia |
| 50 | (2) Reducer Socket (a) 20 x 15 mm dia. |
| 51 | 3) Nipple (a) 15 mm dia. |
| 52 | (4) Plain Socket (a) 15 mm dia. |
| 53 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. ma |
| 54 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E |
| 55 | 65 mm dia Full way valve |
| 56 | Poviding and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra |
| 57 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in |
| 58 | Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post i |
| 59 | Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep |
| 60 | Earth work in back filling the trenches after laying different types and size |
| 61 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all |
| 62 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. BCD - 5.2.3. |
| 63 | ProvidingFor rainforcement of 10mm Diaasper approveddesign&drawing excludingcarriagetoworksiteincluding cuttingbendingbindingetcallcomplete job |
| 64 | Providing 12mmcement plaster (1:6) withapprovedqualityof clean coarse sand of F.M1.5 including screening curing with all lead & lift of water scafloding taxes&royaltyall complete asper includingspecitionanddirection of E\I |
| 65 | add cost of materals |
| 66 | Add . 18 % GST |
| 67 | add 1 % labour cess Please Enable Macros to View BoQ information |
