|
| 1 | Drilling in all kinds of soil & rock for installation of submersibble pump set with D.T.H. rigs as complete including supply all materials, labour, tools and plants, drilling air rigs,air compressor and equipments as well as fuel, lubricants for making 200 mm x 150 mm dia boring etc. and tranporting rig machine & other vehicles up to site of work as per specification and direction of E/I a) 0 to 50 Mtrs |
| 2 | b) 50 Mtrs. to 250 Mtrs |
| 3 | Providing and lowering 200 mm dia ( 6 mm wall thickness) E.R.G.H.S black pipe of approved make ( heave duty) as per standard specification including providing all materilas, labour and equipments, cutting threading and supplying extra socket if required for casing all complete as per specification and direction of E/I |
| 4 | Supplying all materials , labour, tools & plants equipments 200 mm dia M.S cap for fitting and fixing the same over 200 mm dia casing pipe etc all complete as per direction of E/I |
| 5 | Supplying 100 mm dia submersible pump sets confirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and poly- propylene/ noryl impeller. Motor suitable for working on 415V+10%, 3PH, 50 Hz, A.C. supply with cable guard, thrust carbon/ fiber bearing to with stand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump.with safty wire (Make KSB/Crompton) (DW&S (Sl 139-M1055) |
| 6 | D.O.L. Starter with SS Enclosure with 380/415 Volt coil |
| 7 | Supplying , Flat flexible submersible cable with, copper conductor, PVC insulated, and PVC sheathed as per IS : 7098 |
| 8 | Providing safety wire of 5 mm dia PVC coated |
| 9 | Supplying & Fitting M.S. Clamp |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 11 | Providing and fixing HDPE container Syntex or alike one piecemolded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 2000.00 litres Capacity Water storage Tank(DWSD item No-01 M) |
| 12 | Transportation Charge |
| 13 | Lifting of 2000 Litrs Capacity Tank up to 4.5m height with lifting tools with rope and labour |
| 14 | Making hole in Tank |
| 15 | Making long screw in G.I. pipe including supplying and fitting jam nuts and extra socket etc |
| 16 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. (DWSD-3.1.1.1) |
| 17 | Dismantlingplaincementconcretework including stacking serviceable m |
| 18 | Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality o |
| 19 | Manufacture, supply and Delivery of following Nominal dia UPVC column 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm |
| 20 | wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm |
| 21 | Providing and supplying High Density Polyethylene pipe (HDPE pipe) 63 mm HDPE Pipe |
| 22 | 50 mm HDPE Pipe- |
| 23 | 32 mm HDPE Pipe- |
| 24 | 20 mm HDPE Pipe- |
| 25 | Providing and fixing Gun Metal Gate valve with C I wheel of approved qualit 50 mm dia . |
| 26 | 65 mm dia . |
| 27 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory |
| 28 | excluding transportation, taxes and duties. PE-80 , PN- 10 8 Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper 50 mm HDPE Pipe |
| 29 | 65 mm HDPE Pipe |
| 30 | 65 mm HDPE Pipe |
| 31 | 50 mm HDPE Pipe |
| 32 | 32 mm HDPE Pipe |
| 33 | 20 mm HDPE Pipe |
| 34 | Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 |
| 35 | (Part 1/2004) ISI Mark /medium quality in Stand Post. 10Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes |
| 36 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. DWSD 3.1.13 (1) Elbow(a) 15 mm dia |
| 37 | (2) Reducer Socket (a) 20 x 15 mm dia. |
| 38 | 3) Nipple (a) 15 mm dia. |
| 39 | (4) Plain Socket (a) 15 mm dia. |
| 40 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. ma |
| 41 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E |
| 42 | 65 mm dia Full way valve |
| 43 | Poviding and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra |
| 44 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in |
| 45 | Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post i |
| 46 | Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep |
| 47 | Earth work in back filling the trenches after laying different types and size |
| 48 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all |
| 49 | Add cost of S/B and Photography |
| 50 | Add . 18 % GST |
| 51 | add 1 % labour cess Please Enable Macros to View BoQ information |
