|
| 1 | LT OVERHEAD LINE Supply of steel tubular pole 9 Metre long designated 410 SP-33 bottom galvenised complete in all respect. |
| 2 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 8.0 meter and upto 10.0 meter.[7077*0.789=5583.75*(111/110)=5634.51] |
| 3 | Supply of 3x120+1x95+1x16 Sq.mm Arial Bunched conductor on poles with bolts, nuts etc. complete in all respect as per direction of E/L |
| 4 | Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on cable tray as required.(For ABC wire). Above 95 sq. mm and upto 185 sq. mm [115*0.789=90.735*(111/110)=91.55] |
| 5 | Supply&Erection of Suspansion/ J type clamps of on steel tubular poles/steel rail/PCC poles with bolts, nuts etc. complete in all respect including painting with aluminium paint as per direction of engineer in charge |
| 6 | Supply & Fixing of Dead End Clemps with required nuts and bolts complete in all respect as per direction of E/L |
| 7 | Supply & Erection of PRC Connector for AB Cable etc. complete in all respect as per direction of E/1 |
| 8 | Supply & Fixing of 8 way Distribution box for service connection complete in all respect as per UPPCL Rate |
| 9 | Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. [5600*0.789=4418.4*(111/110)=4458.56] |
| 10 | S/F of 2.5 mtr long 20 mm dia MS earth rod with 6 SWG GI earth wire, nut, bolt & washer etc. complete in all respect. |
| 11 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. |
| 12 | Supply & erection of \\"D\\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts,nuts etc. complete in all respects including painting with aluminium paint . |
| 13 | SUBSTATION Supply of steel tubular pole 11metrer long designated IS:410 SP-55 bottom galvenised complete in all respect. |
| 14 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 meter[8177*0.789=6451.65*(111/110)=6510.30] |
| 15 | Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50mm X 6mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. [5125*0.789=4043.62*(111/110)=4080.38] |
| 16 | Supplying of two lengths of channel iron 100 mm X 50 mm x 6 mm (9.56 kg per metre) double pole cross arm for three wire 33 KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/Fittings, bolts, nuts, washers etc and painting with primer and finish paint as required. [7154*0.789=5644.50*(111/110)=5695.81] |
| 17 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required. [978*0.789=771.64*(111/110)=778.65] |
| 18 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. [312*0.789=246.16*(111/110)=248.40] |
| 19 | Supply & erection of overhead line with ACSRconductor on poles / service bracket including binding etc. complete in all respects. (Dog conductor) |
| 20 | supply & fixing of 11KV TPMO switch with polymer insulator with clamps complete in all respect as per direction by E/I. |
| 21 | Supply & Fixing of 11 KV 3-phase DO fuse set with clamps complete in all respect as per direction by E/I. |
| 22 | Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc, as required. [2628*0.789=2073.49*(111/110)=2092.34] |
| 23 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required. [5368*0.789=4235.35*(111/110)=4273.85] |
| 24 | Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. [7472*0.789=5895.408*(111/110)=5949] |
| 25 | Supply & fixing of anticlimbing device fabricated from G.I.(flat) of 25 mm x 6mm size in a shape of ring of the pole size, having G.I. flat pointed fins of length 225 mm in 8 nos. including all the materials, labour, T&P and other material required for proper completion for work and to the satisfaction of Engineer-in-Charge. |
| 26 | Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. |
| 27 | Supply, Installation, Testing & Commissioning of 11/0.433 KV. 50Hz, 3 Phase 100 KVA copper wound outdoor type oil filled air cooled DYN-11 Vector group Transformer complete as per UPPCL Approved make & Specifications with all accessories such as Breather Temp meter Bucholz relay in all respect. as per direction of engineer in charge. |
| 28 | Supply and erection of 200 Amp. TPN tap off boxon rising mains complete with HRC fuses etc.complete in all respect. |
| 29 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 95 sq. mm 3-1/2 core Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. (SOR rate/501-SOR rate/507)=700-170=530 |
| 30 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 95 sq. mm 3-1/2 core (45mm) [588*0.789=463.93*(111/110)=468.14] |
| 31 | Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. [4907*0.789=3871.62*(111/110)=3906.81] |
| 32 | Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work. |
| 33 | Supply and construction of feeder piller box plinth for size 0.9 x .45 x1.45 Mt. including earth work brick work with plaster complete in all respect. |
| 34 | STREET LIGHT WORK S/L of 10 Sqmm x 2 core Unarmoured LT 1100 Volt Aluminium Conductor twin flate cable Complete. |
| 35 | Supply and fixing of LED Street light Fitting havingdie cast aluminium body and diffuser with driver setsuitable for 75 to 90 Watt. Confirming to IP 66 andabove Protection complete in all respect. CAT-AAA |
| 36 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent/HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. [1477*0.789=1165.35*(111/110)=1175.94] |
| 37 | S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. Cat. B Please Enable Macros to View BoQ information |
