|
| 1 | Earth work excavation in all classes of soil except sand and rock such as hard stiff clay black cotton shales murrums hard red earth gravelly soil etc with initial lead and lift and depositing on banks as per ss 20 B etc complete |
| 2 | Plain cement concrete 1:5:10 mix using 40 mm HBG ISS metal including cost and conveyance of all materials and including all labour charges etc complete |
| 3 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc. complete complying with the standard specificaiton. - Plinth beam |
| 4 | Plain cement concrete 1:2:4 mix using 40 mm HBG ISS metal including cost and conveyance of all materials and including all labour charges etc complete |
| 5 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 6 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers |
| 7 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. As per SD 667. |
| 8 | Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. |
| 9 | Painting the new iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer. |
| 10 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steelpipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc. complete M-0651 |
| 11 | Supply and Delivery and Fixing of Automatic Single Phase Timer Box Including Transportation Etc., (M-1304 24 Hours Programmable Timer Switch , M-1777 MCB Double Pole 6A to 32A, 10KA , M-1605 Synthetic Moulded Compound Box for Street Light SOR 2025-26) |
| 12 | Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete. |
| 13 | Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials,labours and fixing etc., complete as directed by the departmental officers. |
| 14 | Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia Leaver and 40mm top bar with MS pipes. The seater is of moulded plastic with heavy duty bush bearing . The cost shall inclusive of all materials,labours and fixing etc., complete as directed by the departmental officers. |
| 15 | Supplying and fixing of slide for below 12 years old childrens to a length of 3.00m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frame is made up of 25mm Ms pipe,Handrail 20mm dia Ms pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers. |
| 16 | Supply and fixing of Duck Meri Go round using all support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and installation charges etc., complete |
| 17 | Supply and fixing of Jumgle gym below 12 years old children to a height of 2.10m with 80mm dia leaverand 40mm top bar with MS pipes.The ladder frame is made up of 25mm Ms pipe,Handrail 20mm dia Ms pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc., complete as directed by the departmental officers. ` Please Enable Macros to View BoQ information |
