Tender For Estimate For Gravitational Distribution 3 & 4 From Ohsr Tank 2 To Provide Surface Water To Villages Abhiana Kalan, Abhiana Khurd Etc In District Ropar, Rupnagar-Punjab

TDR : 54396576

Tender Notice
BOQ

13 Days Left

Rupnagar , Punjab

Tender Brief : Tender For Estimate For Gravitational Distribution 3 & 4 From Ohsr Tank 2 To Provide Surface Water To Villages Abhiana Kalan, Abhiana Khurd Etc In District Ropar

Document Fees
₹ 2000 /-

EMD
₹ 980000.0 /-

Tender Value
₹ 4.90 Crore /-

Submission Date
20-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Upto 1.5 m depth (i) All classes of soil except rocky
2	Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
3	Cement Concrete 1:4:8with (i) stone ballast 20mm gauge (PCC) mixing
4	Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth
5	First class burnt brick work laid in cement sandmortar 1:4 in foundation and plinth
6	12.5 mm thick cement plaster 1:4
7	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
8	Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.
9	Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm .
10	Supply and installation of alfa valve including fittings etc complete in all aspects of 75 mm .
11	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (d) 200mm i/d Sluice Valves flanged
12	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (e) 250mm i/d Sluice Valves flanged
13	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI 315mm Sluice Valves flanged
14	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 355mm Sluice Valves flanged
15	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (h) 400mm i/d Sluice Valves flanged
16	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (i) 450mm i/d Sluice Valves flanged
17	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 500mm Sluice Valves flanged
18	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 550mm Sluice Valves flanged
19	Providing & fixing double air valve ISI Markedasper IS-14845 including jointing all carriages complete. (a) C.I Double air valve (Size 65mm)
20	Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. (B) upvc pipe 4 kgf / cm2 A) 75MM
21	Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 90MM
22	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 110MM
23	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 160MM
24	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 200MM
25	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 250MM
26	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 1) 125mm @ 4 kg/sqcm
27	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 2) 140mm @ 4 kg/sqcm
28	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 3) 180mm @ 4 kg/sqcm
29	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 4) 225mm @ 4 kg/sqcm
30	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 5) 280mm @ 4 kg/sqcm
31	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 315 mm (4 kgf)
32	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 355 mm(4 kgf)
33	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 400 mm (4 kgf)
34	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 450 mm (4 kgf)
35	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 500 mm(4 kgf)
36	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 560mm(4 kgf)
37	Providing and fixing elbow/bends 90 degree dia 75mm as per IS code 4985 complete in all respect.
38	Providing and fixing elbow/bends 90 degree dia 90mm as per IS code 4985 complete in all respect.
39	Providing and fixing elbow/bends 90 degree dia 110mm as per IS code 4985 complete in all respect.
40	Providing and fixing elbow/bends 90 degree dia 125mm as per IS code 4985 complete in all respect.
41	Providing and fixing elbow/bends 90 degree dia 140mm as per IS code 4985 complete in all respect.
42	Providing and fixing elbow/bends 90 degree dia 160mm as per IS code 4985 complete in all respect.
43	Providing and fixing elbow/bends 90 degree dia 180mm as per IS code 4985 complete in all respect.
44	Providing and fixing elbow/bends 90 degree dia 200mm as per IS code 4985 complete in all respect.
45	Providing and fixing elbow/bends 90 degree dia 225mm as per IS code 4985 complete in all respect.
46	Providing and fixing elbow/bends 90 degree dia 250mm as per IS code 4985 complete in all respect.
47	Providing and fixing elbow/bends 90 degree dia 280mm as per IS code 4985 complete in all respect.
48	Providing and fixing elbow/bends dia 90 degree 315mm as per IS code 4985 complete in all respect.
49	Providing and fixing elbow/bends 45 degree dia 75mm 6kgf/sqcm as per IS code 4985 complete in all respect.
50	Providing and fixing elbow/bends 45 degree dia 90mm as per IS code 4985 complete in all respect.
51	Providing and fixing elbow/bends 45 degree dia 110mm as per IS code 4985 complete in all respect.
52	Providing and fixing elbow/bends 45 degree dia 125mm as per IS code 4985 complete in all respect.
53	Providing and fixing elbow/bends 45 degree dia 140mm as per IS code 4985 complete in all respect.
54	Providing and fixing elbow/bends 45 degree dia 160mm as per IS code 4985 complete in all respect.
55	Providing and fixing elbow/bends 45 degree dia 180mm as per IS code 4985 complete in all respect.
56	Providing and fixing elbow/bends 45 degree dia 200mm as per IS code 4985 complete in all respect.
57	Providing and fixing elbow/bends 45 degree dia 225mm as per IS code 4985 complete in all respect.
58	Providing and fixing elbow/bends 45 degree dia 250mm as per IS code 4985 complete in all respect.
59	Providing and fixing elbow/bends 45 degree dia 280mm as per IS code 4985 complete in all respect.
60	Providing and fixing elbow/bends 45 degree dia 315mm as per IS code 4985 complete in all respect.
61	Providing and fixing Equal tee dia 75mm as per IS code 4985 complete in all respect.
62	Providing and fixing Equal tee dia 90mm 6kgf/sqcm as per IS code 4985 complete in all respect.
63	Providing and fixing Equal tee dia 110mm 6kgf/sqcm as per IS code 4985 complete in all respect.
64	Providing and fixing Equal tee dia 125mm as per IS code 4985 complete in all respect.
65	Providing and fixing Equal tee dia 140mm as per IS code 4985 complete in all respect.
66	Providing and fixing Equal tee dia 160mm 6kgf/sqcmas per IS code 4985 complete in all respect.
67	Providing and fixing Equal tee dia 180mm as per IS code 4985 complete in all respect.
68	Providing and fixing Equal tee dia 200mm as per IS code 4985 complete in all respect.
69	Providing and fixing Equal tee dia 225mm as per IS code 4985 complete in all respect.
70	Providing and fixing Equal tee dia 250mm6kgf/sqcm as per IS code 4985 complete in all respect.
71	Providing and fixing Equal tee dia 280mm as per IS code 4985 complete in all respect.
72	Providing and fixing Equal tee dia 315mm as per IS code 4984 complete in all respect.
73	Providing and fixing Equal tee dia 355mm as per IS code 4984 complete in all respect.
74	Providing and fixing Equal tee dia 400mm as per IS code 4984 complete in all respect.
75	Providing and fixing Unequal tee dia 200*160 mm as per IS code 4985 complete in all respect.
76	Providing and fixing Unequal tee dia 200*125 mm as per IS code 4985 complete in all respect.
77	Providing and fixing Unequal tee dia 200*110 mm as per IS code 4985 complete in all respect.
78	Providing and fixing Unequal tee dia 200*90 mm as per IS code 4985 complete in all respect.
79	Providing and fixing Unequal tee dia 160*125 mm as per IS code 4985 complete in all respect.
80	Providing and fixing Unequal tee dia 160*110 mm as per IS code 4985 complete in all respect.
81	Providing and fixing Unequal tee dia 160*90 mm as per IS code 4985 complete in all respect.
82	Providing and fixing Unequal tee dia 125*110 mm as per IS code 4985 complete in all respect.
83	Providing and fixing Unequal tee dia 110*90 mm as per IS code 4985 complete in all respect.
84	Providing and fixing Reducer Size 90mm to 75mm per IS code 4985 complete in all respect.
85	Providing and fixing Reducer Size 110mm to 90mm as per IS code 4985 complete in all respect.
86	Providing and fixing Reducer Size 125mm to 110 mm as per IS code 4985 complete in all respect.
87	Providing and fixing Reducer Size 140mm to 125 mm as per IS code 4985 complete in all respect.
88	Providing and fixing Reducer Size 140mm to 160 mm as per IS code 4985 complete in all respect.
89	Providing and fixing Reducer Size 200mm to 160 mm as per IS code 4985 complete in all respect.
90	Providing and fixing Reducer Size 225mm to 200 mm as per IS code 4985 complete in all respect.
91	Providing and fixing Reducer Size 250 mm to 200 mm as per IS code 4985 complete in all respect.
92	Providing and fixing Reducer Size 250mm to 225 mm as per IS code 4985 complete in all respect.
93	Providing and fixing Reducer Size 315mm to 225 mm as per IS code 4985 complete in all respect.
94	Providing and fixing Reducer Size 315mm to 250 mm as per IS code 4985 complete in all respect.
95	Providing and fixing Reducer Size 355mm to 250mm as per IS code 4985 complete in all respect.
96	Providing and fixing Reducer Size 355mm to 315 mm as per IS code 4984 complete in all respect.
97	Providing and fixing Reducer Size 400mm to 355 mm as per IS code 4984 complete in all respect.
98	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 550
99	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 500
100	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. dia 450 mm
101	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. 400 mm
102	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 355 mm
103	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 315 mm
104	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 250 mm
105	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 200 mm
106	Providing and fixing MS Service saddle of dia 75mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
107	Providing and fixing MS Service saddle of dia 90mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
108	Providing and fixing MS Service saddle of dia 110mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
109	Providing and fixing MS Service saddle of dia 125mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
110	Providing and fixing MS Service saddle of dia 160mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
111	Providing and fixing MS Service saddle of dia 180mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
112	Providing and fixing MS Service saddle of dia 200mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
113	Providing and fixing MS Service saddle of dia 225mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
114	Providing and fixing MS Service saddle of dia 250mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
115	Providing and fixing MS Service saddle of dia 400mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
116	Providing, laying, jointing, fixing and testingISIMarkeduPVCPipewithG.I. specialsasper ISI-4985, includingcost of G.I. specialssuch as tees, bends, sockets, elbows etc.testing inside building complete. uPVC Pipe 6 Kgf/cm2 50 mm dia
117	Providing and fixing Reducer Size 65to 50 mm as per IS code 4984 complete in all respect.
118	Any Other Items Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Punjab Tenders

Construction Tenders

Irrigation Related Work Tenders

Reservoir Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Estimate For Gravitational Distribution 3 & 4 From Ohsr Tank 2 To Provide Surface Water To Villages Abhiana Kalan, Abhiana Khurd Etc In District Ropar, Rupnagar-Punjab

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect. (a) Upto 1.5 m depth (i) All classes of soil except rocky
2	Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.
3	Cement Concrete 1:4:8with (i) stone ballast 20mm gauge (PCC) mixing
4	Reinforced cement concrete M-25 with cement @375/kg per cum hand mixed but excluding steel reinforcement centring and shuttering in foundation and Plinth
5	First class burnt brick work laid in cement sandmortar 1:4 in foundation and plinth
6	12.5 mm thick cement plaster 1:4
7	Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
8	Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in postion complete.
9	Supply and installation of alfa valve including fittings etc complete in all aspects of 90 mm .
10	Supply and installation of alfa valve including fittings etc complete in all aspects of 75 mm .
11	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (d) 200mm i/d Sluice Valves flanged
12	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (e) 250mm i/d Sluice Valves flanged
13	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI 315mm Sluice Valves flanged
14	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 355mm Sluice Valves flanged
15	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (h) 400mm i/d Sluice Valves flanged
16	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. (i) 450mm i/d Sluice Valves flanged
17	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 500mm Sluice Valves flanged
18	Providing&fixingC.I/D.I Flangedend, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing&cost of Nut ,Bolt & insertion sheet, all carriage complete (with theapproval of Engineer in charge). Class PN-1.6 as per ISI B. 550mm Sluice Valves flanged
19	Providing & fixing double air valve ISI Markedasper IS-14845 including jointing all carriages complete. (a) C.I Double air valve (Size 65mm)
20	Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. (B) upvc pipe 4 kgf / cm2 A) 75MM
21	Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in the ground complete in all respects. B) upvc pipe 4 kgf / cm2 A) 90MM
22	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 110MM
23	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 160MM
24	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 200MM
25	Providing and laying, jointing, fixing andtesting ISI Marked uPVC Pipe Lines as perISI 4985-2000, including specials such astees, bends, sockets, elbow etc., cutting,testing (including cost of specials) in theground complete in all respects.B) upvc pipe 4 kgf / cm2 A) 250MM
26	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 1) 125mm @ 4 kg/sqcm
27	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 2) 140mm @ 4 kg/sqcm
28	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 3) 180mm @ 4 kg/sqcm
29	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 4) 225mm @ 4 kg/sqcm
30	Providing laying upvc pipe as per ISI-4985(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification 5) 280mm @ 4 kg/sqcm
31	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 315 mm (4 kgf)
32	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 355 mm(4 kgf)
33	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 400 mm (4 kgf)
34	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 450 mm (4 kgf)
35	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 500 mm(4 kgf)
36	Providing laying hdpe pipe as per ISI-4984(ISI marked with the prior approval of engineer-in-charge ) along the trenches and laying the same in trenches to correct alignment and gradients,cutting,jointing, and testing complete as per specification dia 560mm(4 kgf)
37	Providing and fixing elbow/bends 90 degree dia 75mm as per IS code 4985 complete in all respect.
38	Providing and fixing elbow/bends 90 degree dia 90mm as per IS code 4985 complete in all respect.
39	Providing and fixing elbow/bends 90 degree dia 110mm as per IS code 4985 complete in all respect.
40	Providing and fixing elbow/bends 90 degree dia 125mm as per IS code 4985 complete in all respect.
41	Providing and fixing elbow/bends 90 degree dia 140mm as per IS code 4985 complete in all respect.
42	Providing and fixing elbow/bends 90 degree dia 160mm as per IS code 4985 complete in all respect.
43	Providing and fixing elbow/bends 90 degree dia 180mm as per IS code 4985 complete in all respect.
44	Providing and fixing elbow/bends 90 degree dia 200mm as per IS code 4985 complete in all respect.
45	Providing and fixing elbow/bends 90 degree dia 225mm as per IS code 4985 complete in all respect.
46	Providing and fixing elbow/bends 90 degree dia 250mm as per IS code 4985 complete in all respect.
47	Providing and fixing elbow/bends 90 degree dia 280mm as per IS code 4985 complete in all respect.
48	Providing and fixing elbow/bends dia 90 degree 315mm as per IS code 4985 complete in all respect.
49	Providing and fixing elbow/bends 45 degree dia 75mm 6kgf/sqcm as per IS code 4985 complete in all respect.
50	Providing and fixing elbow/bends 45 degree dia 90mm as per IS code 4985 complete in all respect.
51	Providing and fixing elbow/bends 45 degree dia 110mm as per IS code 4985 complete in all respect.
52	Providing and fixing elbow/bends 45 degree dia 125mm as per IS code 4985 complete in all respect.
53	Providing and fixing elbow/bends 45 degree dia 140mm as per IS code 4985 complete in all respect.
54	Providing and fixing elbow/bends 45 degree dia 160mm as per IS code 4985 complete in all respect.
55	Providing and fixing elbow/bends 45 degree dia 180mm as per IS code 4985 complete in all respect.
56	Providing and fixing elbow/bends 45 degree dia 200mm as per IS code 4985 complete in all respect.
57	Providing and fixing elbow/bends 45 degree dia 225mm as per IS code 4985 complete in all respect.
58	Providing and fixing elbow/bends 45 degree dia 250mm as per IS code 4985 complete in all respect.
59	Providing and fixing elbow/bends 45 degree dia 280mm as per IS code 4985 complete in all respect.
60	Providing and fixing elbow/bends 45 degree dia 315mm as per IS code 4985 complete in all respect.
61	Providing and fixing Equal tee dia 75mm as per IS code 4985 complete in all respect.
62	Providing and fixing Equal tee dia 90mm 6kgf/sqcm as per IS code 4985 complete in all respect.
63	Providing and fixing Equal tee dia 110mm 6kgf/sqcm as per IS code 4985 complete in all respect.
64	Providing and fixing Equal tee dia 125mm as per IS code 4985 complete in all respect.
65	Providing and fixing Equal tee dia 140mm as per IS code 4985 complete in all respect.
66	Providing and fixing Equal tee dia 160mm 6kgf/sqcmas per IS code 4985 complete in all respect.
67	Providing and fixing Equal tee dia 180mm as per IS code 4985 complete in all respect.
68	Providing and fixing Equal tee dia 200mm as per IS code 4985 complete in all respect.
69	Providing and fixing Equal tee dia 225mm as per IS code 4985 complete in all respect.
70	Providing and fixing Equal tee dia 250mm6kgf/sqcm as per IS code 4985 complete in all respect.
71	Providing and fixing Equal tee dia 280mm as per IS code 4985 complete in all respect.
72	Providing and fixing Equal tee dia 315mm as per IS code 4984 complete in all respect.
73	Providing and fixing Equal tee dia 355mm as per IS code 4984 complete in all respect.
74	Providing and fixing Equal tee dia 400mm as per IS code 4984 complete in all respect.
75	Providing and fixing Unequal tee dia 200*160 mm as per IS code 4985 complete in all respect.
76	Providing and fixing Unequal tee dia 200*125 mm as per IS code 4985 complete in all respect.
77	Providing and fixing Unequal tee dia 200*110 mm as per IS code 4985 complete in all respect.
78	Providing and fixing Unequal tee dia 200*90 mm as per IS code 4985 complete in all respect.
79	Providing and fixing Unequal tee dia 160*125 mm as per IS code 4985 complete in all respect.
80	Providing and fixing Unequal tee dia 160*110 mm as per IS code 4985 complete in all respect.
81	Providing and fixing Unequal tee dia 160*90 mm as per IS code 4985 complete in all respect.
82	Providing and fixing Unequal tee dia 125*110 mm as per IS code 4985 complete in all respect.
83	Providing and fixing Unequal tee dia 110*90 mm as per IS code 4985 complete in all respect.
84	Providing and fixing Reducer Size 90mm to 75mm per IS code 4985 complete in all respect.
85	Providing and fixing Reducer Size 110mm to 90mm as per IS code 4985 complete in all respect.
86	Providing and fixing Reducer Size 125mm to 110 mm as per IS code 4985 complete in all respect.
87	Providing and fixing Reducer Size 140mm to 125 mm as per IS code 4985 complete in all respect.
88	Providing and fixing Reducer Size 140mm to 160 mm as per IS code 4985 complete in all respect.
89	Providing and fixing Reducer Size 200mm to 160 mm as per IS code 4985 complete in all respect.
90	Providing and fixing Reducer Size 225mm to 200 mm as per IS code 4985 complete in all respect.
91	Providing and fixing Reducer Size 250 mm to 200 mm as per IS code 4985 complete in all respect.
92	Providing and fixing Reducer Size 250mm to 225 mm as per IS code 4985 complete in all respect.
93	Providing and fixing Reducer Size 315mm to 225 mm as per IS code 4985 complete in all respect.
94	Providing and fixing Reducer Size 315mm to 250 mm as per IS code 4985 complete in all respect.
95	Providing and fixing Reducer Size 355mm to 250mm as per IS code 4985 complete in all respect.
96	Providing and fixing Reducer Size 355mm to 315 mm as per IS code 4984 complete in all respect.
97	Providing and fixing Reducer Size 400mm to 355 mm as per IS code 4984 complete in all respect.
98	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 550
99	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 500
100	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. dia 450 mm
101	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. 400 mm
102	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 355 mm
103	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 315 mm
104	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 250 mm
105	Providing ,and fixing cast iron adaptor of 6kg/cm2 pressure including testing,comisioning ,cpmplete in all respect to the satisfaction of engineer encharge. Dia 200 mm
106	Providing and fixing MS Service saddle of dia 75mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
107	Providing and fixing MS Service saddle of dia 90mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
108	Providing and fixing MS Service saddle of dia 110mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
109	Providing and fixing MS Service saddle of dia 125mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
110	Providing and fixing MS Service saddle of dia 160mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
111	Providing and fixing MS Service saddle of dia 180mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
112	Providing and fixing MS Service saddle of dia 200mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
113	Providing and fixing MS Service saddle of dia 225mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
114	Providing and fixing MS Service saddle of dia 250mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
115	Providing and fixing MS Service saddle of dia 400mm*50mm including testing ,comissioning complete in all respect to the satisfaction of Engineer enchage.
116	Providing, laying, jointing, fixing and testingISIMarkeduPVCPipewithG.I. specialsasper ISI-4985, includingcost of G.I. specialssuch as tees, bends, sockets, elbows etc.testing inside building complete. uPVC Pipe 6 Kgf/cm2 50 mm dia
117	Providing and fixing Reducer Size 65to 50 mm as per IS code 4984 complete in all respect.
118	Any Other Items Please Enable Macros to View BoQ information

Tender For Estimate For Gravitational Distribution 3 & 4 From Ohsr Tank 2 To Provide Surface Water To Villages Abhiana Kalan, Abhiana Khurd Etc In District Ropar, Rupnagar-Punjab

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us