|
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Excavation by mechanical means(JCB or Hydraulicexcavator) intrenchesforpipelines with straight or open cutting in streets or openarea including trimming anddressing sides levellingof bedsof trenches tocorrect grade, cutting joint holes, refilling consolidation,watering , including thecost of dewateringof rainwater,diversionfor traffic, night signals. providing & fixing caution boards, crossingover trenches foraccess to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the towninvolvingleadupto15metercompletein all respect.Exceeding 1.5mdepth but not exceeding2.25 m depth . All classes of soil except rocky |
| 3 | Providing, Stringingout, cutting, Jointing and testing of ISI Marked D.I.Pipe (S&S)as per IS8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring (A) D.I. Pipe as per IS 8329 DI-K7 (I)450mm i/d pipe lines laid complete. |
| 4 | Providing, Stringingout, cutting, Jointing and testing of ISI Marked D.I.Pipe (S&S)as per IS8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring (A) D.I. Pipe as per IS 8329 DI-K7 (a)80mm i/d pipe lines laid complete. |
| 5 | Providing & fixing make ISI marked Cast steel class 300 NRV Dia 450 mm including SS flanges, Champion rubber join, including jointing, testing, and all carriage etc all SS fittings complete in all respect. Quality as per satisfaction and with the approval of Engineer-In-Charge. |
| 6 | Providing & fixing make ISI marked Cast steell class 300 Sluice valve Dia 450 mm SS flanges, Champion rubber join, jointing, testing, and all carriage etc all SS fittings complete in all respect . Quality as per satisfaction and with the approval of Engineer-In-Charge |
| 7 | Providing & fixing double acting air valve with isolation valve with ISI Marked as per IS-14845 including jointing all carriages complete. Dia 80mm |
| 8 | Providing, Supplying and installation of Mild steel Air Vessel 1200 L with bladder systemof gaspreset of 10 kPa including all necessary fittings/accessories as per engineer in charge. |
| 9 | Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type |
| 10 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth |
| 11 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 12 | 12.5 mm thick cement plaster 1:4 |
| 13 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) |
| 14 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete |
| 15 | Any Other Items Please Enable Macros to View BoQ information |
