|
| 1 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structuralmembers only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than22.5 Kg./m |
| 2 | Supplying at site and fitting & fixing Mild Steel long nuts & bolts etc complete as per the direction of the Engineer in charge. |
| 3 | Supplying, fitting and fixing at site Cast Iron flap shutter for hume pipe sluice with Cast Iron collar and other fittings etc. complete (as per drawing & direction of Engineer-in-charge)including castingthe same, necessary drilling etc with carriage to site complete. The Cost includes cost of Materials, Machinaries , Manpower, Cutting, Aligning,drilling,Welding,Finishing,Consumables,Carriagesand all overheads with all leads and lifts complete as per specification (without painting). |
| 4 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/LatestRevisionconsistingofskinplate,verticaland horizantalgrider,stiffeneretc.madeofMSmaterialconsistingofangle,channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting, Aligning, drilling, Welding,Finishing,Consumables,Carriagesandalloverheadswith all leads and lifts complete as per specification (without painting). Width of Gate shuteer size upto 2 metre |
| 5 | Takingoutoldexistingunservicabledamageddraw/flap gateshutter of distributories/branchcanal/ minorcanal/channelcompletelyafter disengaging fromhoistingsystemcompletelyforinstallationofnew gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of manpower employedfordismantlingandcostofconsumables likeoxygen,accetylenegas,hirechargesofmachineries,like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etcincluding carriage loading & unloading with all lead & lift. |
| 6 | Supplying, fifling & fixing of C.I wheel in the screw hoisting systemforliftingorloweringthedrawshutter.Thewheelconsisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer-in-charge.The cost includes cost of materials, man power employed for dismantling and fittingfixing,consumableslikecutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading &unloading. |
| 7 | Stripping off worn out plaster and raking out joints of walls, celings etc upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 8 | Plaster ( to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, noising and drip course, scaffolding/ staging where necessary ( Ground floor).(Excluding cost of chipping over concrete surface) (i) With 1:4 cement mortar. (a) 15 mm thick plaster |
| 9 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE: Cement 0.152 cum per 100 Sqm. |
| 10 | PaintingofGatesofDistributory/Branch/Minorcanal/PumpColoum pipe/Pump Discharge Pipe & other similar components on prepared surfaces with one coats of zinc phosphate primer (airless spray preferred) 50microns/coat and one coal tar epoxy, 150 microns/coat including cost of all materials,labour,scaffoldingetc.,completewith all leads and all lifts. |
| 11 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as perprofile. |
| 12 | Extra rate over Item Nos.11 for all kinds of soil for every additional lift of 1.50 metre or part thereof beyond the initial lift of 1.50 metre. One extra lift |
| 13 | Extra rate over Item Nos.11 for all kinds of soil for every additional lead of 30 metres or part thereof beyond the initial lead of 30 metres. Four extra lead |
| 14 | Earthwork in excavation in the canals / drainage channels / borrow pits / River bed / slope of bank as noted below as per designed section & throwing the spoils in layers of 25 cm. for making banks as per profile or to deposit the same in any other place within an initial lead of 30 metreand initial lift of 1.5 metre including breaking clods, rough dressing etc. complete as per direction of the Engineer-in-charge. (a) Ordinary soil / local soil / soil mixed with moorum or kankar / silt, dry or moist / slushy silt / sticky soil. Please Enable Macros to View BoQ information |
