|
| 1 | Excavation in foundation and trenches etc. in earth work in all kind of soils such as pick work, jumper work,saturated soil including blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15 Cm. layers when required into plinths,side of foundations etc including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting, timbering where ever required as per direction & best satisfaction of the Engineer-in-Charge. |
| 2 | Providing & laying cement concrete 1:3:6 (1 cement :3 sand:6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in: foundation and plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying cement concrete work 1:1.5:3 (1 cement: 1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: |
| 4 | Foundation and plinth including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 5 | Walls (any thickness but not less than 0.10 m thickness) including attached butteresses, pillaster plinth and string courses etc. from top of foundation level upto floor two level with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and laying Reinforced cement concrete work 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in: |
| 7 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilever upto floor two level complete in all respect with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 8 | Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm, so as to give a fair finish including centring shuttering strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in:- |
| 9 | Flat surfaces such as soffits of suspended floor, roofs, landing and the like etc. upto 200mm thickness complete in all respects with in all leads and lifts as per the directions and best satisfaction of the Engineer-in-Charge. |
| 10 | Vertical surfaces such as walls (any thickness), partitions and the like including attached pillasters, buttress, plinth and string courses and the like with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 11 | Edges of slab complete in all respects with in all leads and lifts as per the directions and best satisfaction of the Engineer-in-Charge. |
| 12 | Providing Mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 13 | Laying, Jointing, Testing and Carriage of GMS tubes (Light Grade) in trenches including tube fitting such as bends, tees, air valves, unions and collars etc complete (Earth work to be measured and paid for separately) complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. |
| 14 | 15 mm dia (LG) |
| 15 | 40 mm dia (LG) |
| 16 | Providing and fixing of Copper Alloy Screwed End Globe valves (class-II) ISI marked for water work purposes as per IS-778-1984 (Reaffirmed-2010) of following diameter complete in all respects with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. |
| 17 | White washing with lime on undecorated wall surfaces two coats to give and even shade including thoroughly brooming the surface to remove all dirt dust and other foreign matters complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-charge. |
| 18 | Providing and fixing of precast concrete Manhole cover & frame confirming to IS-12593-1988, Part-I and IS-12592-1998, Part-II, 560 mm diameter, medium duty complete in all respect with in all leads and lifts as per direction and best satisfaction of Engineer-in-Charge. |
| 19 | Manufacturing, supplying, fabrication and fixing of MS Fabricated Protection Pannel 750mm x 750mm made with MS Angle 40x40x4 mm for frame, MS Angle 30x30x3mm for cover, MS Flat 25x5mm for fixing of sliding door bolt and MS Sheet (10 gauge) 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS Angle, MS Flat & MS Sheet, Embedding in RCC Slab By drilling holes in MS Angle & in RCC Slab, provision for providing and fixing sliding door bolt 300x16mm, MS Handle 100mm, Lock and applying a coat of red Lead paint & painting two coat with steel paint (Firroza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
