Tender For Providing & Installation Of Single Phase 2 Hp Submersible Motor Pump Set & Pvc Water Tank With M.S. Stand At Various Place In Ward No. 54 (No Of 4 Motor Pump Set), Ujjain-Madhya Pradesh
TDR : 54387783
Tender Notice
BOQ
11 Days Left
Ujjain
Madhya Pradesh
Tender For Providing & Installation Of Single Phase 2 Hp Submersible Motor Pump Set & Pvc Water Tank With M.S. Stand At Various Place In Ward No. 54 (No Of 4 Motor Pump Set)
Name of Work:- Providing & installation of single phase 2 HP submersible motor pump set & PVC water tank with M.S. Stand at various place in ward no. 54 (No of 4 motor pump set)
Sl. No.
Item Description
1
Supplying & Installation of Energy efficiant five star BEE rating ISI Marked required capacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\\"/6\\" tube well with Contral Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby)2 HP Head Mt. 147-42Discharge LPM 15-55 MPPHED SOR Ist Sep. 2023 11.2/P-164
2
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. Use for service cable2.5 Sq.mm.multi strand11.5/P-165
3
Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor11.6/P-165
4
Manufacturing and supply of specials made out of M.S. steel plate or HR coil conforming to IS 3589-2001 or its latest revision/amendment, 5mm to 6mm thick plate in shapes and sizes required as per site conditions including cost of steel plate & other electrical & mechanical material, including Submerged Arc welded, including cost of transportation, loading and unloading complete approved by Engineer-in-Charge. (This is applicable only when standard special are not available).14.8/P-233
5
Providing, placing and installation of polyethylene water tank ISI 12701 :1996 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and the base support for tank on terrace (at all floor level).14.39/P-245
6
Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 8 Kg/sq.cm : 25 mm dia UADD SOR VOL. - I 2nd Aug. 20217.1.2/P-103
7
Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. Screwed 25mm dia6.8.3/P-90
8
Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) 25mm dia6.27.3/P-95 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
