Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for brick work with fly ash Bricks straight or curved on plan exec 6 mtr mean radius with moduler bricks in CM 1: 6 incl Demolition of brick or stone/ boulder masonary complete all as specified and as directed. |
| 2 | PCC in foundation in 1:4:8 type D2 (40mm garded agg) in foundation filling, sub base and mass concrete including demolition of Existing PCC comlete all as specified and directed |
| 3 | M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded aggregate)as in flooring/ Plinth protection Finish even & smooth with extra cement including demolition of Existing PCC comlete all as specified and directed. |
| 4 | S&F MS framed work such as grills designe type with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 5 | M & L for preparation of new steel surfaces & applying two coats of synthetic enamel to steel surfaces of any description over 10 cm in width or girth not otherwise described, over a coat of red oxide primer complete all as specified and directed. |
| 6 | S&F in repairs 25 mm dia Stainless steel fency type heavy curtain rod medium grade including fency type bracket , stops roller etc complete all as specified and directed. |
| 7 | S&F Stainless steel fency type curtain rod caps/ side bulbs, etc to be fitted in 25 mm curtain rod pipe complete all as specified and directed. |
| 8 | M&L for 1.5 mm thick Veneered decorative laminated type of flat or curved surfaces finish , clooured and pattern approved , fixed with approved adhesive as per manufactures instruction on raised wall paneling or flush shutters etc including malamine polish over veneer plywood complete all as specified and as directed. Make : Kitply/Century Plywood/Green Ply |
| 9 | S&F 12mm thick plywood ( 7 Nos of ply ) grade BWR, type BB,commercial faces,fixed with screws to timber frame work complete all as specified and as directed. |
| 10 | S&F pluging to cement concrete or stone walls, complete for wooden fillets , grounds, mouldings, boarding etc at distance n. exc 1 mtr complete all as specified and as directed. |
| 11 | S&F in repairs of Plain fillets in 2nd class hard wood,sectional area exc 6 & nexc 13 sqcm,wrought,fixed with screws in repairs etc complete all as specified and as directed.. |
| 12 | S&F 2nd class hard wood of sec area exc 6 Sqcm and n. exc 13 Sqcm round beading to top & bottom of wall panneling work with melamine polish for architect look complete.fixed with screws in repairs etc.complete all as specified and as directed. |
| 13 | Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified. |
| 14 | Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of texture paint over alkali resistant priming paint & internal 2 mm thick wall care putty etc all as specified & directed. |
| 15 | M&L for preparation of existing surfaces of wall and applying two coats of luster paint white or tinted on walls all as specified and directed. |
| 16 | M&L for preparation of existing surfaces of wall and applying one coats of luster paint white or tinted on walls all as specified and directed. |
| 17 | M&L for complete removal of existing treatment of wall surfaces and applying two coats of luster paint or tinted on walls including 1mm thick wall care puty and one coat of wall primer primer white etc complete all as specified and directed. |
| 18 | M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying two coats of Dulux Weather shield paint complete all as specified and as directed. |
| 19 | M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and as directed. |
| 20 | M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered and dusted and applying two coat of Oil Bound distemper complete all as specified and as directed. |
| 21 | M&L for preparation of old decorative surfaces of ceiling , cornices (plastered or unplastered) of any description, sand papered and dusted and applying one coat of Oil Bound distemper complete all as specified and as directed. |
| 22 | M&L for preparation of old decorative surfaces of wall , cornices (plastered or unplastered) of any description, sand papered and dusted and applying one coat of Oil Bound distemper complete all as specified and as directed. |
| 23 | M&L for complete removal of old decorative surfaces of any description and applying 2 mm thick wall care putty on wall complete all as specified and as directed. |
| 24 | M & L for french polishing on surfaces of any descrption , exceeding 10 cm width or girth over a coat of a coat of wood filler on old wooden surfaces including cleaning and preparation of old wooden surfaces with one or more coats complete all as specified and as directed. |
| 25 | Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified. |
| 26 | M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 27 | M&L for preparation of old painted steel surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 28 | Material and labour for 25 mm thick PCC(1:2:4) type B-1 using 12.5mm graded stone aggregate below flooring as a levelling course in floor, including demolition of existing PCC comlete all as specified and directed. |
| 29 | Material and labour for glazed ceramic coloured tiles of size 300 mm x 600 mmx 7mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick rendering in cement mortar(1:4) Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed. |
| 30 | Material and labour for glazed ceramic coloured tiles of size 600 mm x1200 mmx 9mm thick on vertical surfaces such as skirtings,dados and riser to steps ,set and jointed in adhesive thickness 3-6mm under the tiles and pointed in adhesive or coloured to match the shade of tiles over and including 15 mm thick rendering in cement mortar(1:4) Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed. |
| 31 | M&L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) of size 600x600 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, ,over and including 20 mm thick screed bed in cement mortar(1:4) complete. Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed |
| 32 | M&L coloured/ double charged/ ultra charged joint free Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished,of size 600x1200 mm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 20 mm thick screed bed in CM (1:6). Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed |
| 33 | M&L coloured/ double charged/ ultra charged joint free Vitrified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished,of size 600x600 mm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 20 mm thick screed bed in CM (1:6). Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed |
| 34 | M&L for Water fountain colour Glass mosaic Tiles , size 20x20cm joint free, 7 to 8 mm thick (square/rectangular) in floors and wall etc. set and jointed with epoxy grout or silicone sealant waterproof finish coloured to match, over and including 20 mm thick screed bed in cement mortar(1:4) with Water proofing compound complete. Make : Johnson Tiles/Kajaria/Orient Bell including dismantling of existing Tile, complete all as specified and directed |
| 35 | M&L for cloured Machine pressed precast concrete interlocking paver block tiles M-35 of 60 mm thick any shape and size confirming to IS 15658-2006 glossy finish as in floor / pavement laid over 30 mm thick stone dust cushioning complete all as specified and dircetd. ( Note : sand measured and paid seperately |
| 36 | M&L for precaste coloured chequered cement concrete tiles, glossy finish of size 300 x 300 x 25 mm thick machine pressed set jointed and pointed with grey cement and pigmenrt in floor and cut and polished including 20 mm thick screed bed in cement motar 1:4 over 30 mm sand dust cushioning under floor or in foundation including watering and consolidation including dismantling of existing Tile, complete all as specified and directed. |
| 37 | M&L 75 mm thick PCC (1:4:8) Type D-2 (using 40 mm graded sone aggregate ) as in sub base/ flooring including demolition of existing PCC comlete all as specified and directed. |
| 38 | M&L for PCC 1:2:4 type B1(20 mm graded stone aggregate) cement concrete in rounded or coping chamfered on edges of chequired tiles / interlocking tiles etc. including demolition of existing PCC comlete all as specified and directed |
| 39 | M&L Machine cut cudappah stone slab 20-25mm thick as in kitchen platform base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing Tile, complete all as specified and directed |
| 40 | M&L for granite (of any type) work (table rubbed and polished) 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15 mm thick screed plaster in cement mortar(1:6) including dismantling of existing Tile, complete all as specified and directed. |
| 41 | Rounding(half) to edges of stone slab one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 42 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement, incl taking down of cement plaster of any description( WPC shall measured and paid sepretally) complete all as specified and directed. |
| 43 | M&L for rendering 15 mm thick on fair faces of brick work in cement mortar 1:6 with water proofing compound finished even and smooth without using extra cement incl taking down of cement plaster of any description complete all as specified and directed.( WPC shall measured and paid separately) |
| 44 | M&L cement concrete type B0 1:2:4 using (12.5 mm graded aggregate) including with mixing with Dr Fixit water proofing , as in top of chajjaa kerbs , rounded chamfered on edges , in lintel upto 1.5 m clear span, cill, steps, seismic and other similar bands, plinth courses string courses, lacing courses , kneelers, apex including weathering , slightly rounded or chemfered angles and throating etc. necessary form work. (Note : Rate including scaffoliding upto hight 12 mtr.) |
| 45 | Supply only Integral waterproofing compound. |
| 46 | Material and labour for preparation of newly plastered surfaces of walls and applying two coats of OBD over a coat of alkali resistant priming coat & smooth surface with and including 2mm thick wall care putty complete all as specified and directed.Make : Nerolac/Jenson & Nicholson/Asian Paints |
| 47 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete. |
| 48 | Taking down wooden frame with shutter without taken off shutter from the frame,n. exceeding 1.5 sqm each including removing from site complete all as specified and directed. |
| 49 | Taking down wooden frame with shutter without taken off shutter from the frame,exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site complete all as specified and directed. |
| 50 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including removing from site complete all as specified and directed. |
| 51 | S&F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lungs, hinges, lockstrick plate etc. complete as specified . |
| 52 | S&F 300 mm long brass sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy fixed complete all as specified and directed. |
| 53 | S&F 150 mm long SS Handle for door complete all as specified and directed. |
| 54 | S & F in repair 150 mm length Floor door stopper of brass body and tongue, hard drawn steel spring all as specified and directed . |
| 55 | S&F in repair 200 mm long brass sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy fixed complete all as specified and directed. |
| 56 | S&F in repair 200 mm long brass barrel tower bolts of extruded section ISI marked complete all as specified and directed. |
| 57 | S&F in repair 150 mm long brass handle caste type alloy ISI Marked handles, caste type polished bright complete all as specified and directed . |
| 58 | S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed |
| 59 | S&F 150 mm long Extruded Aluminium alloy handles, caste type anodised ISI marked complete all as specified and directed . |
| 60 | S&F 200 mm long SS, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and directed |
| 61 | S&F 100 mm long SS steel hinges pin, anodised and fixed, type C-21complete all as specified and directed. |
| 62 | S&F 100 mm long Brass but hinges heavy weight and fixed complete all as specified and directed. |
| 63 | S&F in repairs of Vitreous china Urinal, Full stall type, white incl coupling, waste pipe, flush pipe, grating,union,bracket, fixing automatic flushing cistern, pvc connection and spreader complete also providing and fixing plugs, bedding urinal against wall in CM (1:2) , incl 60mm long brass screw, pointing around the urinal all as specified and directed. |
| 64 | Supply and fixing of 32 mm thick,factory made,gauged and skeleton shutters from 1st class hard wood (Hollock), open rebated,prepared to receive glass,gauge etc(without sash bar),edges of framing plain,chamfered or rounded,fitted with cut & mitred beads for securing glass,gauge etc,size of members of shutters as specified in SSR-2009 Part-I,members kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. |
| 65 | S&F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces is coverde with decorative face veneer with lapping all around of the shutter / frame to match complete all as specified. |
| 66 | S & F factory made solid PVC moulded door shutters with particle bore core, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face,supplying & fixingued solid in frame at site as per specification & drgs with particle board core etc.including 3mm thick, 1st Class HW (TW) beading all around on edging and welding 3 Nos MS but hinges size100mm with existing MS frame all as specified and directed by Engr-in-Charge . |
| 67 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 68 | S&F aluminium powder coated three track sliding window with two or more shutters with & including 4mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes :(a) Frame bottom 20620(b) Frame top & side 20681(c) Shutters top & bottom 20844(d) Shutter inter lock 20724(e) Handle (Side) for 20606 shutters |
| 69 | S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes complete :-(a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352 |
| 70 | S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and stainless steel wire cloth 0.36 mm nominal dia & 1.18 mm width aperature for mosquito proofing and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :-(a) SP 20048(b) Glazing clips 19352 |
| 71 | S&F aluminium door with chowkhat of section 80mm x 40mm of wall thickness 2.00 and bottom rail 160 x 40mm of wall tickness 2.00mm including glazing with 5.5mm thick sheet glass and also incl fittings such as aluminium tower bolt-1 No, handle-2 Nos, glazing pins, clips, beading and hydraulic door closure regulated designated 3 universal type complete all as specified and directed by Engr-in-Charge. The shutter frame shall be tied at top (internally) with screw of round bar 10mm dia, aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make etc complete all as specified and directed by Engr-in-Charge. |
| 72 | M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge.(Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.)(Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.) |
| 73 | M&L for demolition of concrete surfaces and carry out the Roof Treatment, RCC Chajja and also apply the following process:- (i) open all crakes, clean, filling crack joints with Pidilite (Dr Fixit) Compound. (ii) Removing all dead skeen and applying hard brushing for cleaning. (iii) pressure washing. (iv) U.R.P. & cement pesting.(v) leveling. (vi) Fiber mash pesting with U.R.P & Cement only. (vii) apply priming coating (viii) three coats are apply on conc. surfaces New Coat Processing (First Coat), Again New Coat Processing (Second Coat) after dry the surfaces and Finally New Coat Processing (Third Coat) after dry the surfaces on roof/top comp. The treatment to be carried out on the concrete surfaces including cleaning all RCC surfaces as per manufacturer's specification/ datasheet and material should be utilized authorised coy, pidilite (Dr Fixit) comp all specified and directed. |
| 74 | M&L for half cut bamboo walling/ ceiling partition brown colour , stiffened by means of doubled bamboo slips not less than 60 mm wide and not less than 6mm thick (one slip on each side of bamboo walling) at right angles and not more than 4mm apart, tied together with cane slips and by tying with 0.90 mm, black wire at 45 cm to 50 cm centres including taking down existing all as specified and directed. |
| 75 | M&L for only repair of existing half cut bamboo walling/ ceiling partition brown colour , stiffened by means of doubled bamboo slips not less than 60 mm wide and not less than 6mm thick (one slip on each side of bamboo walling) at right angles and not more than 4mm apart, tied together with cane slips and by tying with 0.90 mm, black wire at 45 cm to 50 cm centres all as specified and directed. |
| 76 | M&L for French polishing on bamboo wall / ceiling surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 77 | M&L for French polishing on bamboo wall / ceiling surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and directed. |
| 78 | S & F roof sheeting prepainted galvalume aluminium zinc coating 150 gms GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to all, fixed with self tapping screws including taking down old AC sheet complete all as specified and as directed. |
| 79 | S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed. |
| 80 | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post,window chajja cover frame and similar work etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as directed. including dismantling of existing Steel frame work |
| 81 | Material and labour for prepaparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified. |
| 82 | Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, galvanised wire, screws fixed to aluminium grills or wooden frames etc complete all as specified and directed. |
| 83 | Supply and fixing Sliding Door bolt 300mm Stainless Steel complete all as specified and directed. |
| 84 | S&F in repair hydraulic door closer aluminium body suitable for door shutter of 850 to 1000mm in width and of weight between 61 to 80 Kg of approved make of ISI Marked complete all as specified and directed. |
| 85 | S&F 1500 x 600 mm looking mirror of selected quality glass , mounted on 6 mm thick AC built board or commercial ply board andfixed with wooden plug with chroumium plated brass screws and cup incuding teak wood beading decorative type complete all as specified and directed. |
| 86 | S&F in repair 600 x 900 mm bevelled edge looking mirror of selected quality glass , mounted on 6 mm thick AC built board or commercial ply board and fixed to wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 87 | S&F Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No. CON- 037 Jaquar/ 9206 (CASA) of Prayag complete all as specified and directed. |
| 88 | S&F Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag complete all as specified and directed. |
| 89 | S&F CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag complete all as specified and directed. |
| 90 | S& F Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag complete all as specified and directed. |
| 91 | S&F Angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag complete all as specified and directed. |
| 92 | S&F CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag complete all as specified and directed. |
| 93 | S&F CP 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of Jaquar complete all as specified and directed. |
| 94 | S&F CP towel ring round with round flange conforming to CAT No ACN-1121 BN of Jaquar/9218 of Prayag complete all as specified and directed. |
| 95 | S&F CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag and make specified here in after |
| 96 | S&F 2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar and Prayag make specified here in after |
| 97 | S&F Pillar taps swan long neck with aerator CP 15mm bore fancy type with wall flange conforming to CAT No.DLX- 510 AKN ESSCO/ CERA and complete all as specified and directed. |
| 98 | S&F in repairs satinless steel Towel rack with lower hanger, 600mm long conforming to CAT No-CAN-1581H of Jaquar or of equivalant cat part Nos Prayag make as specified here-in-after. |
| 99 | S&F in repairs coner glass shelf with bracket CAT Part No-CPA-1173 of Jaquar or of equivalant cat part Nos Prayag make as specified here-in-after |
| 100 | S&F in repairs Glass shelf 600mm long with bracket CAT Part No-CPA-1171 of Jaquar or of equivalant cat part Nos Prayag make as specified here-in-after |
| 101 | S&F for repairs Overhead shower 120mm Round shape single flow face plate stainless steel & ABS Body in Chrome finishwith rubit cleaning system with Arm 235mm long CAT No-1163 of Jaquar or of equivalant cat part Nos Prayag make as specified here-in-after, including fixing to steel pipe or union. |
| 102 | S&F in repairs satinless steel Robe Hook (khuti) with 5 Hook complete all as specified and directed. |
| 103 | S & F vitreous china wash counter Top basin (colour), ovel type conforming to ECS-WHT-703 of \\" ESSCO\\" , Jaquar of equivalent make specified here-in-after set in and CP waste coupling and \\"Jaquar\\" or of equivalent make all as specified and directed by Engr-in-Charge. |
| 104 | S & F in repairs, vitreous china wash down floor mounded single piece water closet pan with UF seat cover, hinges, fixing accessories set, cistern fittings, trap distance(mm) S-300, 2.5/4.2 lit flusing . Rim less, Tomado flushing. Size 360 x680x 750 Ivory coloured , 'P' or 'S' type, conforming to CAT No OPS-WHT-15851SN of \\"Jaquar\\" or of equivalent make specified here-in-after complete all as specified and directed. |
| 105 | S&F in repairs of Vitreous China,water closet pan , semi pedestal pattern (anglo Indian) white including fixing water closet and provision of concret bedding complete all as specified and directed by engr-in-charge. |
| 106 | S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest, including concrete bedding, inlet, outlet pipe connections etc. complete all as specified and directed. |
| 107 | S & F vitreous china wash basin white flat back of size 550mm x 400mm including ,CP waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete in repairs all as specified and directed by Engineer-in-Charge |
| 108 | S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete as directed by Engr-in-Charge. |
| 109 | S&F 10mm thick bathroom shower toughned glass encloser partition with one fixed glass and one sliding door with stainless steel fixing arrangement and also fixing 20mm dia SS curtain rod complete all as specified and directed. (Jaquar) |
| 110 | Supply and fix in replacement rotational moulded polyethylene water storage tanks in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, (vent pipe all as directed of following capacity including all new tank nipples of suitable size. |
| 111 | (b )1000 ltr. |
| 112 | (c) 2000 ltr. |
| 113 | Cleaning and removing all scale and dirt, etc, from tanks exc 250 ltr but n. exc 500 ltr, disconnection from GI pipe mouths of circulating pipes, and re-fixing in same position after cleaning the Tank etc complete all as specified and directed. |
| 114 | Cleaning and removing all scale and dirt, etc, from tanks exc 500 ltr but n. exc 1000 ltr, disconnection from GI pipe mouths of circulating pipes, and re-fixing in same position after cleaning the Tank etc complete all as specified and directed. |
| 115 | Cleaning and removing all scale and dirt, etc, from tanks exc 1000 ltr but n. exc 2000 ltr, disconnection from GI pipe mouths of circulating pipes, and re-fixing in same position after cleaning the Tank etc complete all as specified and directed. |
| 116 | S&F in repair Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of following bor dia of pipe :- |
| 117 | (b) 20 mm |
| 118 | (b) 25mm |
| 119 | (c )32 mm |
| 120 | S&F in repair unions, brass to connect iron to polyethylene and fixed with following bore dia of pipe |
| 121 | (b) 25mm |
| 122 | (c )40mm |
| 123 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed with following dia |
| 124 | (b) 25mm |
| 125 | (c ) 32 mm |
| 126 | Taking up or down GI water tubing with fittings including cleaning for re-fixing or removing from site of size |
| 127 | (a) 15 mm bore |
| 128 | (b) 20 mm bore |
| 129 | (c) 25 mm bore |
| 130 | (d) 32 mm bore |
| 131 | Supply and fixing of GI water tubing,medium grade with fittings,fixed to wall and ceiling (conceled) or laid in floor of size |
| 132 | (a) 15 mm bore |
| 133 | (b) 20 mm bore |
| 134 | (c) 25 mm bore |
| 135 | (d) 32 mm bore |
| 136 | Refixing in repairs of GI water tubing,medium grade with fittings including cleaning for re-fixing old steel tubing and connections in new or old position wall, ceiling and floor fixed in position (conceled) or laid in floor of size complete all as specified and directed. |
| 137 | (a) 15 mm bore |
| 138 | (b) 20 mm bore |
| 139 | (c) 25 mm bore |
| 140 | (d) 32 mm bore |
| 141 | Cutting in stone concrete block or slab wall for chases, pining in making good to facings where required and painting in in cement mortar 1:3 to ends or edges of landinsgs, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed watter tubing etc and making good , cutting not exc10cm girth as specified and directed. |
| 142 | S&F 3.5 mm thick tinted/ frosted glass of selected quality n.exc 0.5 sqm fixed to aluminium window shutters/ Wooden frames with alu clips/ wooden beading including taking down all as specified & directed. |
| 143 | Demolition and breaking up 100/ 75 mm dia drain pipe (salt glazed ware, AC or PVC ) set in cement complete all as specified and directed. |
| 144 | S& F 110 MM PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors ® |
| 145 | S& F 110 MM PVC (SWR) pipes single socketed, in any length with rubber ring including fixed in wall complete all as specified and directed. |
| 146 | S& F 110 PVC (SWR) bends radius complete all as specified and directed. |
| 147 | S & F 110 mm PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed. |
| 148 | S& F 110 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 149 | S & F 110mm PVC (SWR) WC connector bent type complete all as specified and directed. |
| 150 | S& F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 151 | S& F PVC (SWR) bends wth access door 75 mm radius complete all as specified and directed. |
| 152 | S& F PVC (SWR) bends 75 mm radius complete all as specified and directed. |
| 153 | M & L for 75 mm dia PVC (SWR) floor trap, plain with including jointing with solvent cement complete all as specified and directed. |
| 154 | M & L for 75 mm dia PVC (SWR) mullti floor trap, plain with including jointing with solvent cement complete all as specified and directed. |
| 155 | S&F in repair 100 mm round Stainless steel Grating with waste hole complete all as specified and directed. |
| 156 | S&F in repair 100 mm round Stainless steel Grating complete all as specified and directed. |
| 157 | S&F in repair 32/40 mm bore PVC flexible waste pipe connecting to waste fitting for WHB / Sink complete all as specified and directed. |
| 158 | M&L for sealing aluminium window joints by epoxy polymer to avoid leakages from outside& inside at frame/wall junction all as specified & directed. |
| 159 | S&F POP false ceiling two or more layer (ractangular/ oval/ rounded) decorative design with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T\\" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish including 2 or more coate of oil bound distemper including making niches for fans/light , including taking down of old false ceiling and disign approved by Enger in charge at as specified and directed. (Note : virtical and horizontal etc are measured and paid in flat square) Make-Saint-Gobain, Armstrong,Diamond or Equivalent. |
| 160 | S&F false ceiling with 9 to 9.5mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm ,prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T\\" 25x25mm and wall angle 25x25mm grid and 4 mm dia GI suspension wire etc including taking down of old false ceiling complete all as specified and directed Make-Saint-Gobain, Armstrong,Diamond or Equivalent. |
| 161 | M&L for decorative POPcornices/moulding of pettern as per approved by Engr-in-Charge of cross section area ex 13 sqcm and n.exc 25 sqcm and fixed including preparation of surface and applying two coats of luster paint over a coat of primer matching with the colour of ceiling complete all as specified and directed by Engr-in-Charge. |
| 162 | Providing plubmer to attending complain of plumbing works, sanitary fitting such as repair to water pipe line, flushing cistern, WC, concealed stop cock, shower, hot & cold mixer, health facuset, PVC water tank, float valve, gate valve, floor trap, PVC pipe and etc all working day as per direction of Engr-in-Charge. (Note : 1. The plumber should have necessary equipment as required). 2. Plumber report to office at 9 AM to 5 PM (8 hrs) working for attending complain. |
| 163 | Providing carpenter to attending complain of joinery works such as repair to doors, windows, glass, wire mesh and hydrolic door closer, door stoper, sliding bolt, hinges, handles, tower bolt, wooden paneling, cup board shutters and curtain rod and brackets etc all working day as per direction of Engr-in-Charge. (Note : 1. The carpenter should have necessary equipment as required).2. Carpenter report to office at 9 AM to 5 PM (8 hrs) working for attending complain. |
| 164 | M&L for carrying out non destructive water proofing treatment to sunken slab of toilets/ Bath/ Kitchen/ WHB area etc. including cleaning of surface with wire brush to removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/ cracks in floor and wall joints of floor/ wall all as per manufactures insrtuctions and as directed by Engr-in-Charge. (Make:- AQYATYTE, CREAT, SEAL, grouting compound of Ashwin Enterprises, GPSS (Ground Penetrating scalling systems) of Saga Polytech or similar brand as approved by GE) |
| 165 | M & L Water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m outside defence land all as directed by Engr-in-Charge (b) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces using ready mix plaster. (c) Preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 Kg/sqm of area complete all as specified. (d) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 Kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engr-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (e) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/sqm on the top of membrane surfaces complete all as specified & as directed by Engr in Charge. |
| 166 | Removing of existing water tank of capacity 1000 or 2000 Ltr setting aside (or lowering if required) for repair, cleaning etc and reconnecting & refixing in position after carrying out necessary roof treatment including necessary fittings and GI Pipes if required.(NOTE : Necessary by pass arrangements for water supply is to be done by the contractor till completion of roof work.) |
| 167 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 5 Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination ®(1 load =4.50 cum) |
| 168 | S&F in repair comlpete siphonic flush kit set with dual flush one piece closet WC , complete all as specified and directed by Engr-in-Charge. |
| 169 | S&F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates , chain fixing , etc, including welding, grinding,bufing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc, of required size, on top of floor or the side of waist slabwith suitable arrangement complete accessories as directed by Engr-in-Charge. |
| 170 | S&F in repairs of Seat cover of WC ,closed pattern with flat bottom and mild steel chromium plate for WC complete all as specified and directed by Engr-in-Charge. |
| 171 | S&F in repairs of Vitreous china wash basin, colour flat back pedestal, size 630 x 450mm including brackets,plugs, cutting for and pinningin ends of bracket or errecting on stand complete all as specified and directed. |
| 172 | S&F in repairs of Sensor Pillar Tap for Bath Room Made of Brass, Infrared sensor water saving Eco sensible Range of Jaquar or Hindware complete all as specified and directed. |
| 173 | M&L forpreparation of wooden Frame work of Door, partition of glazed frome and other frame work of Ist Class Hard Wood plain , straight, solid, chowkhats and frame, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in position with 5.50mm thick toughen glass in frame complete all as specified and directed by engr-in-charge. |
| 174 | M&L for Glazed and skelton double shutter 35mm thick of Ist Class Hard Wood open rebated and prepared to received glass, edge of frame plain, chamfered or rounded, including fitted with cut and mitred beads for securing glass and similar work also supplied and fixed in position with 5.50mm thick toughen glass in frame complete all as specified and directed by engr-in-charge. |
| 175 | S&F 5.50mm thick sheet glass, selected quality and glazing with Ist class hard wood beeading in sqiare exc 0.50 sq.m in each pane also including Ist class hard wood beeading in sqiare fixed in frame in position complete all as specified and directed. |
| 176 | M&L for Smooth preparation of new wooden surfaces of any description, over 10cm in width or girth and applying Two coating varnishing over a coat of Under coatting of Varnishing complete all as specified and directed by Engr-in-Charge. |
| 177 | S&Fin repairs and re-Installation and Installation of Wooden flooring of Maple/Teak Wood Sports Flooring solid of Table Tenis, 20mm thickness, Matte finish, Sock absorber, interlock plank system, Indoor usage, 68-80mm wide and in random length in tongue and groove shapes. The edge of the boards will have a finger lock groove and the bottom side with air pass groove and treated with special anti termite and water resistant lacquer complete all as specified and directed by Engr-in-Charge. |
| 178 | M&L for Providing & Fixing of 3mm Aluminium Composite Panel with 1\\"x1.5\\" Aluminium section frame, and ceiling/clading, all joints / gap filled with weather proof silicon sealant, Indian make 3mm coated weather proof silicon sealant 789 or Waker (GERMAN Make) including as site required Electrical point, LED writing as required by NADFM in English & Hindi letters, Lightimg arrangement, necessary scarffolding and light fitting as site requirement complete all as specified and directed by Engr-in-Charge. |
| 179 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) etc complete and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. |
| 180 | Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs,isolator, etc complete all as specified and as directed by Engineer-in charge.. |
| 181 | Taking down existing unserviceable sub main wirings with PVC conduits / PVC casing-caping and making good disturbed surfaces complete all as specified and as directed by Engineer-in charge. |
| 182 | M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of steel screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches as specified and directed. complete all as specified and as directed by Engineer-in charge. |
| 183 | All as per item No 161 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switch. |
| 184 | All as per item No 161 here-in-before but one 5 Amps 3/5 pin socket outlet on independent board. |
| 185 | All as per item No. 161 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board. |
| 186 | All as per item No. 161 here-in-before but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board. |
| 187 | S&F switch piano, flush button, 5/6 Amps single pole, one way, 230 Volts.complete all as specified and as directed by Engineer-in charge. |
| 188 | S&F socket outlet, 3/5 pin, 5 Amps, flush type. complete all as specified and as directed by Engineer-in charge. |
| 189 | S&F switch socket combination, 3/5 pin, 5 Amps, flush type. Complete all as specified and as directed by Engineer-in charge. |
| 190 | S&F Switch socket combination multi-purpose 3pin, 15 Amp and 3 pin, 5 Amps complete all as specified and as directed. |
| 191 | S&F Ceiling rose surface bakelite 65x50 mm, two to three terminals.complete all as specified and as directed. |
| 192 | S & F Bell push,flush type,5 Amp. complete all as specified and as directed. |
| 193 | S & F stepped type electronic fan regulator flush type 220 Volt on the existing phenolic laminated sheet etc all as specified and as directed. |
| 194 | M&L point wiring with 1.5 Sqmm (nominal area), PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including Concealed in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes /Modular Metal flush box of suitable size suitable size for mounting switches, sockets, regulators etc complete for one light/bell point /ceiling fan/ exhaust fan controlled by one ,one way switches as specified and directed.complete all as specified and as directed by Engineer-in charge. |
| 195 | All as per item No. 173 above but one 5 Amps 3/5 pin socket outlet on independent board. |
| 196 | All as per item No. 173 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switches. |
| 197 | All as per item No. 173 here-in-before but wiring with 4 sqmm copper cable with 4 Sqmm copper cable as continuous earth wire for one 5/6 pin /16 Amps socket out let on independent board. |
| 198 | S&F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 199 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 200 | S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 201 | S&F modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 202 | S&F modular type fan regulator 120 Watts , 2 module , complete all as specified and directed. |
| 203 | S&F modular type bell push switch , 1 module , complete all as specified and directed. |
| 204 | S & F modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 205 | All as per item No 183 above but 3 module |
| 206 | All as per item No 183 above but 6 module |
| 207 | All as per item No 183 above but 8 module |
| 208 | S & F Buzzer,Ding Dong AC,230 volts,single pole.complete all as specified and as directed. |
| 209 | S & F LED batten suitble for indoor application 20 W, 4' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge.Make : Havells/Bajaj/Wipro/Crompton |
| 210 | S & F LED batten suitble for indoor application 10 W, 2' length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size including taking down old complete all as specified and as directed by Engr-in-Charge. Make : Havells/Bajaj/Wipro/Crompton |
| 211 | Supply and fix recess mounted low glare LED panellight 2'X2' size 36 watt white/warm white for armstrong/grid ceiling or similar ceiling mounting system complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade including taking down old complete all as specified and directed. Make: BAJAJ/Wipro/Crompton/Havells |
| 212 | M&L for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC casing andcapping with all necessary accessories will be measured as one length). |
| 213 | M&L for sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC casing and capping with all necessary accessories complete all as specified and as directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC casing and capping with all necessary accessories will be measured as one length). |
| 214 | M&L for sub main wiring surface type/conealed type as required at site with four runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and as directed. (Note :- Four runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length). |
| 215 | Supply and fix in repair single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 20 A , 240 V complete all as specified and as directed. |
| 216 | S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed. |
| 217 | S&F in sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 12 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed. |
| 218 | S&F in repair MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, TPN 4 way with 200 Amps rated bus bar , 415 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed. |
| 219 | Supply and fix in repair load line distribution board TPN vertical, 4 way double door type, fixed on wall semi flush with incoming MCCB 4 poles 125 Amps, 16 KA, busbars , neutral link, blanking plates and IP 43 protection complete with all accessories all as specified and as directed by Engineer-in-Charge. Note: Outgoing MCBs shall be measured and paid separately. |
| 220 | S&F MCB, SP, 240 Volts, 5 to 32 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete all as specified and as directed. |
| 221 | S&F MCB, SPN, 240 Volts, 5 to 32 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and as directed. |
| 222 | S&F MCB, SPN, 240 Volts, 40 to 63 Amps. 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single pole and neutral in the MCB DB complete all as specified and as directed. |
| 223 | S&F MCB, TPN, 415 Volts, 16 to 32 Amps., 10 KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral in the MCB DB complete all as specified and as directed. |
| 224 | S&F MCB, TPN, 415 Volts, 40 to 100 Amps., 10 KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral in the MCB DB complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 225 | S&F MCB, TPN, 415 Volts, 40 to 100 Amps., 10 KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral in the MCB DB complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
