|
| 1 | Schedule 'A' Section - I |
| 2 | Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 3 | Material and labour for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and directed. |
| 4 | Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded mechanically crushed stone aggregate) as in surface channels and drains, complete all as specified and directed. |
| 5 | Material and labour cement concrete (1:2:4) type B2 using 40mm graded stone aggregate as in road side berrms, surface channel and drains and like incl necessary form work complete all as specified. |
| 6 | Material and labour for providing design Mix cement concrete in pavement / hardstanding of flexural strength of 40 Kg/ sqcm in field, using 400 Kg/cum of cement for thickness of concrete 25cm or less complete all as specified and as directed. |
| 7 | Forming Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade ‘A’ complete all as specified & as directed |
| 8 | Raking out joints/ pointing of cement mortar or cutting out joints and decayed mortar etc, not less than 12mm deep, washing the joints, removing rubbish off the premises, and keeping the surface to be pointed wet for 2 days prior to re-pointing to random rubble or polygonal rubble uncoursed or brought up to courses in walls or to bricks on edge in floors, surface channels, roofs, etc up to including 10.0 Mtr height, complete all as specified. complete all as specified and directed. |
| 9 | Material and Labour for raised pointing to random or polygonal rubble, uncoursed or brought upto course in Cement mortar 1:4 up to including 10.0 Mtr height, complete all as specified. |
| 10 | Material & Labour for Complete removal of existing treament from wall surfaces by wire brushes & stopping of surfaces & leveling/edging the disturbed surface /edges using necessary fillig compound of birla/Jk wall care putty to obtain smooth regular /even finish using sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint (in Camouflauge pattern) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. complete all as specified Note (s): (i) Pattern of camouflage if any shall be as approved by GE.(if any)(ii) Rate quoted by contractor shall be deemed to include the cost of use and waste of necessary ladder, wooden platform etc,. as may require to execute work at any height upto 8.00 metre.(iii) Painting work shall stand guaranted against fadding/Peeling off for 05 years & the cost agaist this aspect, shall be deemed included in the unit rate quoted for this item. |
| 11 | Material and Labour extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds , mitred /stopped ends etc., complete all as specified and directed. |
| 12 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work , and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 13 | Material and labour for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) as in columns, pillars, posts, etc. complete all as specified and as directed |
| 14 | Material and labour for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) in beams, cantilevers, lintels over 1.50m span, complete all as specified and directed. |
| 15 | Material and Labour for form work to sides of columns, pillars, posts, struts, etc. for rough finished surfaces of concrete complete all as specified and as directed. |
| 16 | Material and Labour for formwork to sides and soffits of roof beams, cantilever, bressummers ,lintels , shelves including supports and similar work for rough finished flat surfaces of concrete, complete all as specified. |
| 17 | Material and labour TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 18 | Material and labour TMT bars, 6mm dia and over , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed. |
| 19 | Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc , complete all as specified and as directed. |
| 20 | Material and Labour for 15mm thick rendering on surface of any description of brick work, concrete surfaces in cement mortar 1:4 finished even and fair, complete all as specified. |
| 21 | Supply only chain link MS galvanised fencing, any size or type complete all as specified |
| 22 | Supply and fixing of chain link fencing of 4mm dia mild steel galvanized wire and mesh size 100x100mm, complete all as specified and directed. |
| 23 | Material and labour preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 24 | Material and labour for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 25 | Material and labour for round bars 10 mm dia and over cut ot length bent to shape required and binding with and including MS wire within (annealed) not less tan 0.9 mm dia or securing with clips conforming to Fe-410-W (Gde E-250) quality -A complete all as specified and directed |
| 26 | Supply and Fixing of MS screw bolts (machine made) with screwed the other, or screwed both ends, each screwed end to be fitted with wahers and one hexagonal or square nut length of bolt exc 10 cm and n.exc 15 cm long diameter of neck 11 to 15 mm dia or 5 cm long complete all as specified and directed. |
| 27 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr-in-charge. |
| 28 | Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 meter mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 29 | Material and labour rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and fair without using extra cement complete all as specified and as directed. |
| 30 | Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer, complete all as specified. |
| 31 | Supply and fixing mild steel framed work as in door chowkats, gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified. |
| 32 | Material and labour Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6 and finished even and fair complete all as specified and as directed. |
| 33 | Material and labour for Non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and as directed. |
| 34 | Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) frame for doors, windows, ventilators, partitions incl necessary joining cleats, rubber packing, snap beading, glazing clips for fixing glass etc with one or more rebates or double/ triple track channels for sliding shutter windows including joining cleat and steel screw for fixing frame to walls/jambs etc. complete all as specified and directed. |
| 35 | Supply and fixing aluminium power coating of approved colour (Thickness or powder coating not less than 50 micron) door, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws etc. complete all as specified |
| 36 | Supply and fixing 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in aluminium shutters/frames in any shape and not exceeding 0.5 Square metre each pane complete all as specified and as directed. |
| 37 | Supply and fixing 12mm thick prelaminated particle board, exterior grade prelaminated both sides with decorative choice laminated fixed in aluminium shutter/ partition complete all as specified & directed |
| 38 | Supply and fixing Door closer hydraulically regulated,Aluminium (extruded section body) designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 39 | Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140 mm, ISI marked complete all as specified and as directed. |
| 40 | Supply and Fixing of Metal suspended ceiling system OREO GI laid in plain 600X600X0.50 mm (tegular) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note:(i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre.The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm mould.Cut cross tees longer than 600mm require independent support. 600X600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm,secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.50 mmx25/5 with soffit cleat made of galvanised steel of size 27x37x25x1.60mm & level clip in dimensions of 85x30x0.80 mm with 4mm GI wire complete all as specified & directed. |
| 41 | Excavating in posts holes (or similar holes) each n.exc 0.50 cum getting out and removing surplus soil to a distance exc 50 metre but n.exc 100 metre and making good surface complete all as specified and directed. |
| 42 | Material and labour for plain cement concrete 1:2:4 type B-2 (using 40 mm graded mechanically crushed stone aggregate), as in foundation, filling and mass concrete, complete all as specified and directed. |
| 43 | Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm with suitable arangement as required complete all as specified & directed. |
| 44 | Supply and fixing roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (web, tee, angle, channel or flat sections) including distance pieces, cleats etc fixed in position,conforming to Fe-410(Gde 250), complete all as specified and as directed. |
| 45 | Supply and fixing Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed |
| 46 | Supply and fixing Aluminium strip 25 x 3.15mm with PVC saddles/porcelin insulators fixied at regular intervals with screws etc. for roof conductors and down conductors above ground complete all as specified and as directed |
| 47 | Supply and fixing Galvanised iron strip 32 x 6mm buried in ground complete all as specified and as directed |
| 48 | Supply and fixing Test point terminal block made of gun metal or phosphorus drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and as directed |
| 49 | Disconnecting of old earthing and replacement with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead upto test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel wire mesh and light grade GI wire protection pipe 15mm bore up to main board complete as shown in electrical plate No. 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unserviceable earthing complete all as specified and testing on completion complete all as specified and directed.Note - The units rate includes the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20mm GI pipe (medium grade) for watering 40mm GI pipe for protection of wire (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made. |
| 50 | Material & Labour for circuit wiring from DB to 15 Amp socket point including with two runs of single core multistranded copper conductor cable FRLSH PVC insulated unsheathed of size 2.5 Sqmm for phase (red) and neutral (black) and one run for contineous earthing of size 2.5Sqmm (green) connected to common earth dolly complete drawing in and including suitable size of PVC casing with all fittings and accessories fixed on wall or ceiling as specied and directed |
| 51 | Material & Labour for circuit wiring with two single core multistranded copper conductor cable FRLSH PVC insulated unsheathed of size 1.5 Sqmm for phase (red) and neutral (black) and one run for contineous earthing of size 1.5Sqmm (green) connected to common earth dolly complete drawing in and including suitable size of PVC casing with all fittings and accessories fixed on wall or ceiling as specied and directed |
| 52 | Supply & fix for Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body with bakelite 65x50mm complete all as specified and as directed |
| 53 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 54 | Supply and fixingdistribution board SPN 6 way double door, IP 42, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connection incoming and outgoing cables & blanking plate as required and making good disturbed surface to match with exisiting complete all as specified and as directed. |
| 55 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amps, complete all as specifeid and as directed |
| 56 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 6-32 Amps, complete all as specifeid and as directed |
| 57 | Supply & Fix Switch piano, flush type single pole, one way 6 Amp complete all as specifed and as directed |
| 58 | Supply & Fix PVC modular box (DBOXx) with MCB protected socket with plug top of 15/16 Amp complete all as specifed and as directed |
| 59 | Supply & Fix PVC modular box (DBOXx) with MCB protected socket with plug top of 5/6 Amp switch single way complete all as specifed and as directed Please Enable Macros to View BoQ information |
| 60 | Supply & Fix PVC modular box (DBOXx) with MCB protected socket with plug top of 5/6 Amp switch single way complete all as specifed and as directed Please Enable Macros to View BoQ information |
