|
| 1 | Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed. |
| 2 | Dismantling wooden battens fixed for tiles, shingles etc. of any size including tilting fillets exceeding spaced 15cm complete, all as specified and as directed. |
| 3 | Dismantling of plain or corrugated steel sheet any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 4 | Dismantling timber scantlings 40 sqcm from its position (rafter, purlins etc) and over in section, in any position, all as specified and as directed. |
| 5 | Material and labour for 2nd class wrought hard wood as purlins, rafters and carpenter’s work generally, tusk and tenon or dovetail joints fixed with all necessary screws and nails complete all as specified and as directed. |
| 6 | `-Ditto- all as per item No 5 above but except timber complete all as specified and as directed. Note : Serviceable and useful timber obtained from item No 4 shall be used. |
| 7 | Material and labour for preparation of new or previously untreated wooden surfaces over 10cm width or girth (truss, rafter, purlins etc) and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 8 | Supply and fix Roof trusses (framed), trussed, rafter, purlins, cleats for securing purlins to wood trusses or rafters; rails and fastenings and heavy bracket framing, ladder /stairs etc (Rolled Mild steel Beam, channel, angle, MS plates or flat sections) including distance pieces, cleats, cutting and welding etc conforming to Fe 410-W (GdeE- 250) quality A complete all as specified and as directed. |
| 9 | Material and labour for preparation of new or old steel surfaces over 10 cm width or girth (truss, rafter, purlins etc) and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 10 | Supply and fix 0.50mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa and AZ 150 as in roof covering/ cladding to wall etc. fixed with self-tapping screws complete all as specified and as directed. |
| 11 | `-Ditto- all as per item No-10 above but plain sheet as in ridge, valley gutter and eaves boards etc. complete all as specified and as directed. |
| 12 | Dismantling old false ceiling boards with grid any description, including hanging wire/ suspenders complete all as specified and as directed. |
| 13 | Material and labour for 5 mm thick plain embossed PVC false ceiling boards of size 595mmx595mm of density 600 Kg/Cum, plain colour decorative type fixed with and including pre powder coated white GI snap grid frame work of size, main runner 24x38x0.32mm, cross tee 24x28x0.3mm and wall angle 19x22x0.4mm to be placed at desired level fixed with 4mm dia GI suspender wire @1.20 centre to centre with wooden rafter/purlins complete all as specified and as directed. Make:- SMP Implex MAGMA, Sintex Industries, Madhu Industries, Sintex etc |
| 14 | Demolition of brick / concrete block masonry built in cement mortar complete all as specified and as directed. |
| 15 | Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. all as specified and as directed. |
| 16 | Material and labour for precast cement concrete 1:3:6, type C0 (using 12.50 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 for closing door/ window openings etc. complete all as specified and as directed. |
| 17 | Material and labour for precast cement concrete 1:3:6, type C0 (using12.50 mm graded stone aggregate) block masonry with solid blocks, n.exc. 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed. |
| 18 | Taking down cement plaster of any description on walls including raking out joints, hacking for key scrubbing down with water etc. all as specified and as directed. (Note- water proofing compound shall be measured and paid separately). |
| 19 | Material and labour for 10 mm thick plastering in cement mortar 1:6, on internal walls finished even and smooth without using extra cement etc. all as specified and as directed. |
| 20 | Material and labour for rendering 15 mm thick in two coats (5 mm thick in cement mortar 1:4 with water proofing compound over 10 mm thick plaster in cement mortar 1:4 on brick work or concrete blocks surfaces finished even and smooth without using extra cement, all as specified and as directed. (Note- water proofing compound shall be measured and paid separately) . |
| 21 | Material and labour for RCC 1:2:4 nominal mix, type B1 (using 20mm graded stone aggregates) for shelves/Slabs supported on walls, lintel beams, landings, balconies, chajja, platforms etc. all as specified and as directed. |
| 22 | Formwork to sides and soffits of slabs, shelves, kitchen platforms, chajja, lintel including supports, overhangs, etc. all as specified and as directed. |
| 23 | Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slab, shelves etc, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and as directed. |
| 24 | Taking down chowkats or frames not exc. 1.50 Sqm each with shutters (without taking off shutters from the frame) etc. complete all as specified and as directed. |
| 25 | Taking down chowkats or frames exc. 1.5 Sqm and not exc 4.00 sqm each with shutters (without taking off shutters from the frame) etc. complete all as specified and as directed. |
| 26 | Supply and fix factory made UPVC white colour Sliding Window Three track frame with shutters area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners and sealed with silicon sealant all around the frame internal and external side, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system including two shutters with glass and including one shutter with Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories, all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) |
| 27 | Providing and fixing factory made uPVC white colour fixed window/ventilators area not exceeding 1.00 sqm each, made of extruded profiles with wall thickness of 2.3mm (+ – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners and sealed with silicon sealant all around the frame internal and external side. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of' zinc alloyed (white powder coated), transmission gear made of mild steel with locking system] and frosted glazing, all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) |
| 28 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with metal chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories) |
| 29 | Supply and fix for powder coated aluminium deco grill of approved colour, design & pattern, with approved standard section fixed to frame with and including frame aluminium frame work hollow, 'H'/ 'F' channels by stainless steel screws complete, complete all as specified and as directed. |
| 30 | Supply and fix 5 mm thick plain transparent glass, ordinary quality and glazing with necessary required EPDM rubber/ neoprene gasket etc. not exc 0.5sqm in each pane complete all as specified and as directed. |
| 31 | Supply and fix 5 mm thick Figured glass, pin head type fixing with necessary required EPDM rubber/ neoprene gasket etc. in each pane etc. complete all as specified and as directed. |
| 32 | Supply and fix 5 mm thick plain transparent glass, ordinary quality and glazing with necessary required EPDM rubber/ neoprene gasket etc. exc 0.5sqm in each pane etc. complete all as specified and as directed. |
| 33 | Supply and fix aluminium expanded metal mesh for mosquito proofing standard size as approved for fixing aluminium windows with necessary required EPDM rubber/ neoprene gasket etc. complete all as specified and as directed. |
| 34 | Material and labour for 18mm thick solid WPC (wood polymer composite) boards one side prelaminated with wood grains having density not less than 650Kg/Cum and having good screw holding capacity including providing holes with PVC cover for wires, fixed with SS screws as in cupboard shutters & shelves complete all as specified and as directed. |
| 35 | Supply and fix 30mm continuous (piano) hinges, mild steel, bright finish or electrogalvanized to cabinet shutters with SS screws, complete all as specified and as directed. |
| 36 | Supply and fix 75mm size stainless steel handles, decorative type, polished bright as approved complete all as specified and as directed. |
| 37 | Supply and fix magnetic door catcher with ABS body, strong magnet, SS plate, dual mounted etc. for cupboards shutters fixed with screws complete all as specified and as directed. |
| 38 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, minimum compressive strength of 58 N/mm2, and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with lugs/SS dash fasteners of required dia and length complete all as specified and as directed. |
| 39 | Supply and fix Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture, proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing, complete all as specified and as directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding screed and plaster (but not backing), removing rubbish out of MoD land, all as specified and as directed. |
| 41 | Material and labour for Vitrified Ceramic coloured premium tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade etc. over and including 15 mm thick screed bedding layers in cement mortar 1:6 for laying floor finishes tiles etc. all as specified and as directed. |
| 42 | `-Ditto- all as per item No 41above but as as in skirting/dado including necessary cutting etc over and including 10 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces, for receiving wall tiles complete all as specified and as directed. |
| 43 | Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm, as in floors installation and fixed with neat cement slurry and joints filled with matching colour cement to match with tile colour over and including 15 mm thick screed bedding layers in cement mortar 1:6 for laying floor finishes tiles etc. all as specified and as directed. |
| 44 | Material and labour for glazed ceramic coloured tiles all tiles of size 8-10 mm thick, area of each tile exceeding 0.13 sqm but not exceeding 0.18 sqm as in dado/skirting/wall tiles and riser to steps and jointed in neat cement slurry and pointed in white or coloured cement to match complete etc. over and including 10 mm thick plaster in cement mortar 1:4 complete all as specified and as directed. |
| 45 | Demolition of Cement concrete (unreinforced) not exc 15 cm thickness (below or above ground floors) complete all as specified and as directed . |
| 46 | Material and labour for PCC, 1:2:4, using 12.50/20mm graded stone aggregate as in floors, coping, levelling course, for filling hold fast etc. complete all as specified and as directed. |
| 47 | Material and labour for 20 mm thick screed bedding layers in cement mortar 1:4 for laying topping layer of etc. complete all as specified and as directed. |
| 48 | Material and labour for Granite 18-20 mm thick work (Rounded at edges and polished) in floors, steps treads and risers in one piece, or door cills, platforms, urinal partition etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as approved by GE. |
| 49 | Supply and fixing in repairs long body Bib cock, fancy type, Brass CP 15mm bore cast copper alloy with crutch or butterfly handle, screwed down complete, all as specified and as directed. |
| 50 | Supply and fixing in repairs 15mm Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for iron pipe or for unions and fixed to plumbing pipe complete, all as specified and as directed. |
| 51 | Supply and fixing in repairs fancy type 15mm bore pillar taps cast copper alloy, with capstan head, chromium plated, screwed down , high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and fixed, all as specified and as directed. |
| 52 | Supply and fixing in repairs 125mm dia Brass CP shower roses with or without swivel joints, including fixing with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange, all as specified and as directed. |
| 53 | Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25-metre-long flexible tube and ABS wall hook, fixed in position complete. Make: Parryware, Cera, Prayag etc, all as specified and as directed. |
| 54 | Supply and fixing in repairs 15mm Angle stop valves, Chromium plated, fancy type, cast copper alloy, screwed down, high pressure, chromium plated with long shank and cup , screwed ends for pipe or for unions and fixing complete, all as specified and as directed. |
| 55 | Supply and fixing in repairs PVC inlet connections 450mm long, 15 mm bore with PTMT nuts etc. complete all as specified and as directed. |
| 56 | Supply and fix 600mm x 600mm bevelled edge mirror of selected quality glass (frameless) with stainless steel bracket and screws complete, all as specified and as directed. |
| 57 | Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including float valve and flush pipe etc complete all as specified and as directed. |
| 58 | Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white with 'P' trap complete including plastic seat cover white closed pattern with flat bottom, and cover with plastic hinges complete all as specified. |
| 59 | Supply and fixing in repairs vitreous china wash basin, white Oval/flat back, size 550 X 400 mm excluding taps, fixed to wall by anchor bolts/ fixed over platform, including 32 mm brass CP waste coupling, waste pipe etc complete all as specified and as directed. |
| 60 | Supply and fixing in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, waste pipe, rating and Union for discharge pipe, all as specified and as directed. |
| 61 | Supply and fixing in repairs for PVC (SWR) pipes 110 mm dia single socketed in any length jointed with rubber ring joints fixed to wall complete all as specified and directed.Note:- Pipe are to be fixed away from the wall using suitable GI Cradles, nuts and bolts etc. |
| 62 | `-Ditto- all as per item No 61 above but 75 mm dia etc. complete all as specified and as directed. |
| 63 | `-Ditto- all as per item No 61 above but 50 mm dia etc. complete all as specified and as directed. |
| 64 | Supply and fix PVC SWR bends/ 45 degree bend 110 mm dia of any radius etc fixed with solvent complete all as specified and as directed. |
| 65 | Supply and fix 110 mm dia PVC SWR junction single, (Single T) equal or unequal with access door etc. complete all as specified and as directed. |
| 66 | Supply and fix 75 mm dia PVC SWR junction single, (Single T) equal or unequal with access door etc. complete all as specified and as directed. |
| 67 | Supply and fix PVC (SWR) bends 75 mm dia of any radius with access door etc. complete all as specified and as directed. |
| 68 | Supply and fix PVC vent cowl 110 mm dia etc. complete all as specified and as directed. |
| 69 | Supply and fix PVC vent cowl 75 mm dia etc. complete all as specified and as directed. |
| 70 | Supply and fix 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 71 | Supply and fix 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 72 | Taking up or down 20mm dia steel / UPVC pipe tubing and connections, including cleaning for re-fixing, all as specified and as directed. |
| 73 | Taking up or down 25mm dia steel/UPVC pipe tubing and connections, including cleaning for re-fixing, all as specified and as directed. |
| 74 | Suppl and laying 20mm (Outer dia) of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 75 | Supply and laying 25mm (Outer dia) of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 76 | Supply and laying 40mm (Outer dia) of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 77 | Cutting chases, drilling holes, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends for concealed water tubing etc. and making good, all as specified and as directed. |
| 78 | Demolition of old existing RCC water storage tank from roof and removing rubbish from site out of defence land complete all as specified and as directed. |
| 79 | Supply and fix 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position connecting up pipes, securing access covers etc. all as specified and as directed. |
| 80 | Supply and fix 25 mm Stop/Gate valve of PTMT any colour high pressure screwed for CPVC pipe and fixed. Make: Prayag, Zolato, Finolex, Supreme etc |
| 81 | Supply and fix 40 mm Stop/Gate valve of PTMT any colour high pressure screwed for CPVC pipe and fixed. Make: Prayag, Zolato, Finolex, Supreme etc |
| 82 | Complete removal of existing treatment by scrapping with steel scrapers and washing with water pressure jet to surfaces of any description complete all as specified and as directed. |
| 83 | Material and labour for 1.50 mm thick cement base wall care putty on walls in two coats(1mm + 0.5mm) sanding with and sand paper complete all as specified and directed. |
| 84 | Material and labour for applying two coats of Interior emulsion paint, matt finish over a coat of interior primer including preparation of old decorated wall surfaces/newly plastered surface, filling the cracks with Crack seal complete all as specified and as directed. |
| 85 | Material and labour for applying two or more coats of Premium acrylic exterior emulsion weather proof Anti-fungal paint having, Alkali & fungal resistance, dirt resistance of required shade with silicon additives @ 1.43 litre/ 10 sqm over a priming coat of exterior primer including preparation of surfaces, filling the cracks with Crack seal complete all as specified and as directed. |
| 86 | Material and labour for preparation of old painted wooden surfaces over 10 cm width or girth (truss, rafter, purlins etc) and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 87 | Material and labour for preparation of old steel surfaces over 10 cm width or girth (truss, rafter, purlins etc) and applying a coat of synthetic enamel (anti corrosive) paint complete all as specified and as directed. |
| 88 | Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, Pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed portion/ surface of wall/ floor/ ceiling etc. by using cement mortar and colour/ white wash to match with the existing surface/location complete all as specified and as directed. |
| 89 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc. and making good to disturbed surface complete all as specified and as directed |
| 90 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc. complete all as specified and as directed. |
| 91 | Disconnection of electrical wire from ceiling rose, taking down exhaust Fan / wall mounted fan of any type, any capacity at any height and in any position and old vintage fans and make, dismantling the louvers and keep in safe custody and hand over to MES store complete all as specified and as directed. |
| 92 | Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), complete with PVC insulated and unsheathed flame retardant low smoke (FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts’ grade ISI marked and including PVC casing capping with fixing accessories in wall/roof/floor etc. ISI marked including common earth dolly including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including arrange necessary factory made modular type metal boxes and cover plates to modular type switch, sockets accessories etc. and matching with the existing surfaces including colour washing all as specified and as directed for the following :- ( Make - Havells, V-guard, Finolex, Poly cab)(a) One light/wall mounted fan/exhaust fan point controlled by one switch |
| 93 | All as per item No 92 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 sqmm wire with 1.5 sqmm earth wire, all as specified and as directed. Make : Havells, V-guard, Finolex, Poly cab. |
| 94 | All as per item No 92 above but for one 3/5 pin socket 5 Amp on independent board with 1.5 sqmm wire with 1.5sqmm earth wire, all as specified and as directed. Make : Havells, V-guard, Finolex, Poly cab. |
| 95 | All as per item No 92 above but for 3/5 pin socket outlet 15 Amps, independent with 2.5 Sqmm single core PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor FRLS complete with 2.50 Sqmm stranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and as directed. Make : Havells, V-guard, Finolex, Poly cab. |
| 96 | Material and labour for sub main wiring with two runs single core PVC insulated unsheathed cable 1100 volts, grade having stranded copper conductor of 2 X 6.0 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size1 X6.0 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed. Note: - Two runs of Copper Conductor of PVC insulated unsheathed 6.0 Sqmm and one run of size 6.0 Sqmm PVC insulated unsheathed copper wire & PVC casing capping will be measured as a single length. |
| 97 | Material and labour for sub main wiring with two run single core PVC insulated unsheathed cable 1100 volts, grade having stranded copper conductor of 2 X 4.0 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size1 X 4.0 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed.Note: - Two runs of Copper Conductor of PVC insulated unsheathed 6 Sqmm and one run of size 4 Sqmm PVC insulated unsheathed copper wire & PVC casing capping will be measured as a single length. |
| 98 | Supply and fix ceiling rose surface type Bakelite 65x50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed. |
| 99 | MCB, SP 10 to 40 Amps C series 10 KA breaking capacity 240 Volts complete all as specified and as directed. Make:- Havells/ Legrand/L&T/SEMENS. |
| 100 | MCB, SPN 63 Amps C series 10 KA breaking capacity 240 Volts complete all as specified and as directed. Make:- Havells/Legrand/L&T/SEMENS. |
| 101 | Supply and fix in repairs of sheet metal enclosure distribution board, triple pole and neutral, vertical type, AC, 415 volt, 04 way with 200 Amp rated copper bus bar and double door complete all as specified & directed and comprising of the following : (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 25 KA breaking capacity complete 01 No ( incoming )(b) MCB, SP, AC, 240 volts of up to 40 Amps,10 KA, 'C' Curve capacity complete - 12 Nos.( outgoing ) |
| 102 | Supply and fix in replacement of distribution board sheet metal enclosure factory made fixed flush with wall inside the nitches or outside on wall surface suitable for mounting isolators & MCB's etc. 240 Volts, 200 Amps rated bus bar capacity SPN 12-way double door complete all as specified and as directed. Make -Legrand/L&T/ABB/Havells |
| 103 | Supply and fixing of MCB, SPN, AC, 240 volts of 63 Amps capacity complete all as specified and as directed. |
| 104 | Supply and fixing of MCB, SP, AC, 240 volts of 6Amp to 40 Amps capacity complete all as specified and as directed. |
| 105 | Material and labour for Modular switch 1 way 6A,1 module, all as specified and as directed. |
| 106 | Material and labour for Modular switch 1 way 16A,1 module, all as specified and as directed. |
| 107 | Material and labour for modular Socket, 6A - 2/3 pin combined 2 module all as specified and as directed. |
| 108 | Material and labour for Socket 6A/16A - 2/3 pin combined 2 module all as specified and as directed. |
| 109 | Supply and fix in replacement of surface mounted LED light fitting four feet long, 36 Watt with comprises of aluminium extruded channel, extruded aluminium body, integrated electronic driver, etc. and all accessories pre-wired including connecting up complete all specified and as directed. Make : Havells or equivalent Crompton / Philips |
| 110 | Supply and fix decorative wall mounting type LED light fitting, 1 x 9/10 Watt, 230 Volt made up of Polycarbonate including lamp with holder, etc. and all accessories pre-wired including connecting up complete all as specified and as directed. Make : Havells City 3 or equivalent make in Crompton /Philips |
| 111 | Supply and fix LED security light 35 W IP 65 connecting up with twin core twisted flexible copper conductor cable with suitable size along with provision of 25 mm dia GI pipe bracket long 4 feet with 135 degree bend fixed on wall with all fixing accessories like clamps nuts bolts etc. complete all as specified and as directed Make: Havells or equivalent Crompton / Philips |
| 112 | Supply and fixing LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed |
| 113 | Supply and fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed. |
| 114 | Supply and fix Heavy duty high flow, quality, wave plus, KD White 800+, swing, silent operation with copper wounded motor high performance wall mounted fans powerful air flow, 230 volts, single phase oscillating ,470 mm sweep, push button three speed control suitable for wall mounting, all as specified and as directed. Make : Crompton ,Havells, Bajaj or Equivalent. |
| 115 | Taking down split type air conditioner 2.0 ton capacity of any type and description indoor and outdoor units complete and all mounted accessories, keeping in safe custody till carrying out addition alteration and re-fixing the same after repair and complete servicing of indoor unit, outdoor unit, cleaning, carried out as per site requirement of any type, any description small spare parts, gas charging and replacement of indoor, outdoor units to new location as directed complete and including additional new copper pipe as per site requirement and mounting clamps completely and testing carried out smooth functioning to the satisfaction of Engr in Charge. |
| 116 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB,240 volts, 20 Amps complete all as specified and as directed. Make: Havells, L& T, ABB |
| 117 | Supply and fix in repairs out door unit for 2.0-ton capacity split type air conditioner condenser coil unit, compressor, fan motor with fan blade check and repaired items replaced and including required gas filling, outdoor unit body fitting and completely all type testing carried out as per site requirement entirely satisfaction of Engr in- charge. |
| 118 | Material and labour for XLPE insulated PVC sheathed armoured with multistranded aluminium conductor cable having cross sectional area 95 Sqmm 3.5 core , 1100 volt grade ,Heavy duty conforming to IS :7098 (Part 2) laid in trenches/Ducts or passing through pipes or fixing on poles etc. complete all as specified and as directed. |
| 119 | Supplying and laying GI tubing light grade 50mm bore including all accessories for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/ sockets/ reducers/ saddles including necessary threading/ drilling works including taking down old GI tube all as specified and directed. |
| 120 | Earthing complete with GI earth plate electrode 60cm x 60cm x 6.3mm thick buried in ground vertically to a depth not less than 2.25m below ground level with the top edge of earth plate not less than 1.5m below ground level connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, check nuts, washers made out of galvanised iron steel all as shown in electrical plate No 3 of SSR Part I and earth wire protected by galvanised pipe light grade 15mm bore and connected to LT panel/ pole through test point including necessary earth work and excavation in any type of soil, GI light grade 15mm bore watering pipe with funnel and wire brush, PCC 1:2:4 type B1 chamber with 20mm thick RCC 1:2:4 type B1 , cover slab with 8mm dia TMT bars at 100mm c/c both ways with MS hook 8mm dia etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
