|
| 1 | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete - Kiln seasoned and chemically treated Padak wood |
| 2 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing -rectangular shape 1500 x 450 mm |
| 3 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm, with two chromium plated brass brackets fixed with C.P.brass screws and PVC sleeves etc.,wherever necessary complete - 12mm dia |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead - of area 3 sqm and below |
| 5 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.- in cement mortar |
| 6 | Providing and fixing factory made uPVC glazed /wire mesh windows /doors comprising of lead free uPVC multichambbered frame, sash and mullion/coupler (where ever required ) extruded profiles having minimum wall thickness of 1.70 mm for series R1 and R2 profiles and 2.10 mm for series R3 and R4 profiles conforming to EN:12608 in any shape, colour and design dully reinforced with galvanized mild steel section made of required shape, and size as per CPWD specification, uPVC extruded glazing beads, interlocks and inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 :Part 1 to 14, plastic packers plastic caps and necessary stainless steel screws etc. Profile of frame , sash and mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-charge . - wire mesh / glazing of plain/ toughened / laminated/ double glass unit with / without high performance coatings as per design rquirements and conforming to IS: 3548 & IS:16231shall be paid separately. Note:- Structural design proof checked from a Government Engineering institute, to be provided by the manufacturer for :(i) Sites with basic wind speed >45m/sec as per IS:875 - Part 3 (ii) Sites with structure height more than 20 m for all wind speeds - Two track two panels sliding window with aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.- Using R2 series with frame (40mm & above ) x ( 40mm & above) & sash (25mm & above) x(50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2metre) |
| 7 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors , windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick - Float glass panes - 5mm thick glass panes (weight not less than 12.50kg / sqm) |
| 8 | Providing and fixing PTMT grating of approved quality and colour - circular type - 100mm nominal dia |
| 9 | Providing and fixing to the inlet mouth of rain water pipe PTMT (an engineering thermoplastic ) grating square (Slit) 150mm square with a height of 8mm and weighing not less than 100 gms |
| 10 | Providing and fixing aluminium hanging floor door stopper , ISI marked , anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete - Single rubber stopper. |
| 11 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in - channels,angles,tees and flats |
| 12 | Dismantling steel work manually / by mechanical means in built up sections without distembering and stacking within 50 metres lead |
| 13 | Clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared |
| 14 | Extra for levelling and neatly dressing of disposed soil completely as per direction of Engineer-in-charge |
| 15 | Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 fine aggregate) |
| 16 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. - Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 17 | Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as perdirection of Engineer-in-charge: -Rectangular manhole 140x90 cm and 2.45 cm deep |
| 18 | Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1 :5:10(1cement:5 fine sand :10 graded stone aggregate 40mm nominal size) |
| 20 | 12mm cement plaster of mix -1:6 ( 1 cement : 6 fine aggregate) |
| 21 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres leadas per direction of Engineer-in-charge. - in lime mortar |
| 22 | Removing the damaged interlocking cement concrete paver block as directed by the Engingeer in charge including disposal of unserviceable materials. The rate includes all taxes. |
| 23 | Providing and laying 83 mm thick factory made rubber moulded hydraulic pressed paver block made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with fine aggregate etc. all complete |
| 24 | Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture |
| 25 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete |
| 26 | Finishing walls with water proofing cement paint of required shade- Old work (one or more coats @ 2.20 kg/10 sqm) complete |
| 27 | Finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade - New work (two or more coats applied @1.43 ltr / 10 sqm over and including priming coat of exterior primer applied @0.90 litre / 10sqm) |
| 28 | Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc |
| 29 | White washing with lime to give an even shade - new work (three or more coats) |
| 30 | Finishing walls with textured exterior paint of required shade - New work (Two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm Please Enable Macros to View BoQ information |
