Tender For Special Repair To Roads Along With Footpath At Armed Regt And Special Repair To Stone Set Path For Tank Crossing And Road Furniture At Suratgarh Mil Stn, Suratgarh-Rajasthan
TDR : 54385303
Tender Notice
BOQ
16 Days Left
Suratgarh
Rajasthan
Tender For Special Repair To Roads Along With Footpath At Armed Regt And Special Repair To Stone Set Path For Tank Crossing And Road Furniture At Suratgarh Mil Stn
Name of Work:- SPECIAL REPAIR TO ROADS ALONGWITH FOOTPATH AT ARMED REGT AND SPL REPAIR TO STONE SET PATH FOR TANK CROSSING AND ROAD FURNITURE AT SURATGARH MIL STN
Sl. No.
Item Description
1
M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a premix/tack coat of catonic bitumen Emulsion (RS-1) confirming to IS:18887 at the rate of 0.20 to 0.30 Kg per Sqm on bituminous road surface as specified in Table 500-5 of MaRTH specification for road and bridge work 2013, by sprayer operated on hot pressure mechanism and Providing and laying spreading 30mm thick (consolidated thickness) of Premix Bituminous Concrete with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MoRTH (5th Rev) specification and as specified and directed.Notes : (i) Catonic bitumen emulsion for premix/tack coat and Paving bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. Please Enable Macros to View BoQ information
2
M&L for preparing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with air compressor through air jet to remove all loose dirt etc and applying evenly a premix/tack coat of catonic bitumen Emulsion (RS-1) confirming to IS:18887 at the rate of 0.20 to 0.30 Kg per Sqm on bituminous road surface as specified in Table 500-5 of MaRTH specification for road and bridge work 2013, by sprayer operated on hot pressure mechanism and Providing and laying spreading 30mm thick (consolidated thickness) of Premix Bituminous Concrete with crushed aggregates of grading 2 as per design based on Job mix formula with 5.5% bitumen binder content (bitumen of Grade VG-30) by weight of total mix including heating bitumen to the required temperature, mixing bituminous concrete in automatic and temperature controlled hot mixing with electronic operated 100-120 TPH batch type hot mix plant, transporting the hot mix from HMP to work at site by tippers and laying, spreading uniformly by means of hydrostatic paver finisher and rolling and consolidating to the required gradient and camber with 8 to 12 tonne smooth wheeled, vibratory and tandem roller, complete all as per Clause 507 MoRTH (5th Rev) specification and as specified and directed.Notes : (i) Catonic bitumen emulsion for premix/tack coat and Paving bitumen of Grade VG-30 for Bituminous Concrete shall be used and procured by the contractor under his own arrangement and at his own cost. (ii) Cost of all the materials, T&P, labour etc. required for preparation of surfaces, applying tack coat, providing and laying bituminous concrete including procurement of bitumen as specified here-in-before, stone aggregates & sand, cement etc., rolling and all other elements required for entire completion of the job shall be deemed to be included in the unit rate quoted for this item. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
