|
| 1 | Excavation in trenches not exc 1.5 m wide & not exc 1.5m in depth for laying under ground cables/erection of poles and getting out in hard/dense soil complete all as specified and directed. |
| 2 | All as per Srl item No.1 above but depth exc 1.5m but not exc 3.0 m |
| 3 | Returning , filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed |
| 4 | Removal of excated surplus material (soil) to a distance not exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed |
| 5 | M&L for duct pipe double wall, corrugated HDPE 50mm dia outer dia, conforming to IS:14930 (Part-II) of approved colour with fittings for cable protection complete all as specified and as directed. |
| 6 | M&L for plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in foundation of poles and mass concrete complete all as specified and directed |
| 7 | Taking down/out unserviceable under ground cables of any cross sectional area and connections including bricks, GI pipes etc of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz bricks, cables, GI pipes complete all as specified and as directed. |
| 8 | Supplying, laying or fixing or passing through pipe testing and commissioning of 1100 volts grade \\"Heavy duty\\" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 Sqmm nominal cross sectional area, 4 core confirming to IS specification complete all as specified and directed |
| 9 | Supplying, laying or fixing or passing through pipe testing and commissioning of 1100 volts grade \\"Heavy duty\\" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 25 Sqmm nominal cross sectional area, 4 core confirming to IS specification complete all as specified and directed. |
| 10 | Supplying, laying or fixing or passing through pipe, XLPE insulated, Armoured, Electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 06 Sqmm, 2 core including Brass compression cable gland, terminal lug etc and tesing completed all as specified and as directed.. |
| 11 | M&L for LT cable, two core PVC insulated, PVC sheathed multi stranded copper conductor size 1.5 Sqmm for security light complete all as specified and directed |
| 12 | S&F in replacement thermo plastic cable junction box of size 300mmx200mmx105mm suitable for cable IP 65 protection including single phase and neutral aluminium bus bar with 10 amp MCB with metric knockout for cable entry incl MS clamp of size 25x3mm, incl 3 nos HDPE gland fixed on pole with clamp nuts, bolts, etc complete all as specified and directed |
| 13 | S&F in replacement street light luminaires 30 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 14 | S&F in replacement street light luminaires 60 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 15 | S&F in replacement street light luminaires 45 watt fitting New generation, (Nexus+) aesthetically designed for road lighting, having secondary optics with uniform distribution of light. Pressure die cast aluminium housing powder coated in grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 16 | S&F in replacement street light Luminaires 90 watt fitting New generation, (Hawk) aerodynamically designed with better thermal management for road lighting, having Pressure die cast aluminium housing powder coated in graphite grey and toughened glass, IP 66 protection, class I with operating voltage 120 to 270 V 100 Lum/W complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 17 | S&F in replacement LED Post top/ Gate light 1x40 watt decorative type, 360 indirect light including fixing with suitable size GI pipe as require on the top of the gate pillor, control by two way SP DB with suitable MCBs as per direction and wiring complete 100 Lum/W complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 18 | S&F in replacement Garden light/Bollard light 10 W pressure die casted powder coated housing with IP 66 prectection 100 Lum/W and driver complete all as specified and directed. Make:- Crompton LBLA3-10-CDL or equivalent make in Phillips/ Havells |
| 19 | S&F in replacement Flood light made up of pressure die casted aluminium housing with toughned glass and high power LED 120 W with IP 66 protection 100 Lum/W complete all as specified and directed. Make: Crompton/Phillips/ Havells/Bajaj. |
| 20 | S&F in replacement Flood light made up of pressure die casted aluminium housing with toughned glass and high power LED 200 W with IP 66 protection 100 Lum/W complete all as specified and directed. Make: Crompton/Phillips/ Havells/Bajaj. |
| 21 | S&F in replacement smart integrated solar all in one street light with more than 100 Lum/W PWM charger controller, LI Ion Battery. Mono Crystalline Solar panel PIR motion sensor easy installation 45 Watt including 50MM DIA POLE 7 MTR long with clamp,nut and bolt for mounting on pole complete all as specified and directed. Make: Crompton/Bajaj/Havells |
| 22 | S&F in replacement street light bracket fabricated out of GI tubing light grade 40 mm bore, bend to the shape as directed of length not less than 1.0 mtr complete with mounting MS clamp of flat iron size 40x5 mm of suitable length, 02 Nos incl nut bolt etc of suitable sizecomplete all as specified and directed. |
| 23 | Taking down Old /unsv/damaged PCC/steel pole complete with all accessories incl demolition of concrete with necessary excavation and earth work incl site clearence complete all as specified and as directed |
| 24 | S&F steel tubular swaged poles with cast iron base plate, final taper plug bolts, nuts, screws as specified type 410 SP-31 (9.0 Mtr long) incl embossing the manufacturers name and IS No of pole and erecting in position all as specified and directed incl painting the exposed portion with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat red oxide primer and painting of 30 cm wide red and white strips upto 1.5 mtr from bottom of the errected pole including marking of pole number complete all as specified and directed. Note: Necessary excavation, earth work and PCC shall be measured and paid for separately |
| 25 | S&F in replacement GI tubing medium grade ISI marked including all fititngs laid in trenches/fixed on wall of size 50mm bore complete all as specified and directed. |
| 26 | S&F in replacement including connecting and testing time switch panel box size 400mm x 350mm x 170mm dust and vermin proof made of 16 guage MS sheet factory made duly painted with two coats of synthetic enamel paint recommended colour over a coat of red oxide primer comprising the following:- |
| 27 | (a) MCB triple pole 32 Amps 230 Volts-01 No.(b) Analog electro mechanical time switch 24 hours with minimum setting 30 minutes for daily working contact rating 16 Amps, 240 volts, AC with initialcharging battery backup having supply and reserve failure upto 150 Amp hours and coil voltage 415 Volts.(c) AC contractror, 3 pole, ML-2 415 volt, 50 Hz(d) Internal wiring with PVC insulated stranded copper conductor of suitable size and making electric connection - 01 No(e) By pass MCB single pole, 32/40Amp, 230 volts- 01 No Note: Time switch pannel box shall be fixed on one pole/wallin feeder pillar box with flat iron clamp 40x6 mm or other suitable fixing arrangement |
| 28 | Taking down old /burnt LED street light driver from existing LED street light of 45 Watt from pole and supply and fixing new LED driver of existing make after making functional refixing it at the same pole complete all as specified and directed. |
| 29 | All as per Srl item No. 27 above but LED street light 60 Watt |
| 30 | All as per Srl item No. 27 above but LED street light 90 Watt |
| 31 | All as per Srl item No. 27 above but LED flood light 120 Watt |
| 32 | All as per Srl item No. 27 above but LED flood light 200 Watt |
| 33 | All as per Srl item No. 27 above but LED Gate light 36/40 Watt |
| 34 | S&F in replacement LED bulb30/ 45/60W 230V on street light pole complete all as specified and directed. Make- Havells,/Crompton/Phillips |
| 35 | Taking down carefully unserviceable Garden light/Street liight/Security light/High Mast light fitting from pole/structure and repair/replacement of worn out parts and carbon cleaning of fittings,cover,copper wire/aluminium wire,clamps ,nuts and bolts, mounting bracket and re assembling the same after repair,testing and refixing in pole/other location and repairing of cable /junction box / timer / contract L1 &L2 /MCB SPN/service wire including provision of necessery T & P like ladder/Boom Vehicle, tools ets as required for taking down and refixing of street light complete all as specefied and directed. Please Enable Macros to View BoQ information |
| 36 | Taking down carefully unserviceable Garden light/Street liight/Security light/High Mast light fitting from pole/structure and repair/replacement of worn out parts and carbon cleaning of fittings,cover,copper wire/aluminium wire,clamps ,nuts and bolts, mounting bracket and re assembling the same after repair,testing and refixing in pole/other location and repairing of cable /junction box / timer / contract L1 &L2 /MCB SPN/service wire including provision of necessery T & P like ladder/Boom Vehicle, tools ets as required for taking down and refixing of street light complete all as specefied and directed. Please Enable Macros to View BoQ information |
