|
| 1 | M&L for glazed ceramic coloured tiles(Matte/Gloss Finish) of size not less than 450x300x7 mm thick as on vertical surfaces such as wall set and jointed in neat cement slurry and pointed with coloured cement to match over 15 mm thick backing coat on fair faces of brick work in CM 1:4 incl dismantling of wall tiling and removing rubbish off premises complete all as specified and as directed. Note: Pattern/Texture and Finish of wall Tile is selected by Engr-in - charge. |
| 2 | M&L for joint free non skid ceramic coloured tiles 7-8mm thick (square/ rectangular) area of each tile exec. 0.09 sqm but not exec. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed or bedding layer in CM 1: 6 incl dismantling of floor tiling incl cement mortar bedding and removing rubbish off premises complete all as specified and as directed. Note : 1.Size and pattern/texture of Tile must be decide by Engr in charge |
| 3 | M&L for scratch & Joint free Glazed(Porcelain) Vitrified Tiles(GVT)/Polished Glazed Vitrified Tiles(PGVT) 9mm-10mm thick (square or rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.72 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. Note : 1.Size and pattern/texture of GVT(Matt Finish)/PGVT(Glossy Finish) must be decide by Engr in charge 2.Glazed Coating on GVT/PGVT must not be less than 1mm. |
| 4 | All as per Item No. 03.00 above but in skirting complete all as specified and as directed. |
| 5 | M & L for machine cut kota stone slab in flooring of floor/steps 18-20 mm thick laid over and including 15mm thick screed bed in CM 1:6 & cement mixed with pigment to match the shade of slab including rubbing & and polishing incl demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 6 | M&L for 18-20 mm thick Granite slab work(table rubbed and polish) of approved quality of required size in Floor,Wall, Platform ,steps/riser and like bedded and jointed in grey cement slurry and pointed with coloured cement(1:2) usig marble dust with admixture of pigment to match the shade of granite stone laid over and including 20 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder incl demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed. |
| 7 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filled with sand and stone dust as in levelling course of interlocking incl demolition of old Stone slabs complete all as specified and as directed. Note: Shape, size and colour of interlocking paver block is selected by Engr-in - charge. |
| 8 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 incl demolition of old Stone slabs complete all as specified and directed. |
| 9 | M&L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough incl demolition of cement concrete in ground floor complete all as specified. |
| 10 | M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, including finishing surface of concrete topping even and rough complete all as sp & dir. |
| 11 | M&L 75mm cement concrete Type C2 1:3:6 (40 mm graded aggregate) in plinth protection and even and finishing cement concrete surface even and smooth without using extra cement incl joints filled with glass beading icl demolition of existing concrete complete all as specified and as directed. |
| 12 | Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 13 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement incl taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.. |
| 14 | M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as sp & dir. |
| 15 | M&L preparation of newly plastered surface of External wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 16 | M&L for preparation of newly plastered surface of internal wall by application of 1mm thick wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper using roller all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note- Putty shall be measured and paid seperately. |
| 17 | M&L for 1mm thick Acrylic/WaterProofing Wall Putty and surface finished even and smooth with sand paper complete all as specified and directed |
| 18 | S&F fabricating coloured powder coated aluminium frame work door,windows , ventilators, with one or more rebates sections of approved tint as required including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed. |
| 19 | S&F aluminium coloured power coated door/ window /ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc including demolition of existing shutters complete all as specified and directed. Note- Wire Mesh,Glass, ACP sheet paid seperately |
| 20 | Supply only 4.8 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium Ventilator/window/ incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. |
| 21 | Supply only for galvanised Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. |
| 22 | Supply only Aluminium Composite Panels (ACP) any colour of for fixing in shutter/partition with all other necessary accessories for fixing complete all as specified and directed. |
| 23 | M&L Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:4 incl demolition of brickwork built in cement mortar including all quoins, arches, pillars complete all as specified and directed. |
| 24 | M & L for walling of random rubble stone masonry but except stones un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as specified and directed. |
| 25 | M & L for walling of random rubble stone masonry, un-coursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6 complete all as sp & dir. |
| 26 | Extra over stone walling for hammer dressing to faces of stone and dressing of faced beds and joints as specified for RR walling uncoursed or brought upto courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40mm for lime or sand stone complete all as specified and directed. |
| 27 | M&L for raised pointing to RR or Polygon rubble uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 28 | M & L for plain cement concrete type B-1, 1:2:4 (20 mm graded agg) in copings, Kneelers, apex stone, bed plate, kerbs including slightly rounded or chamfered angles and throating incl demolition of existing concrete complete all as sp & dir. |
| 29 | S&F 1000ltr capacity rotational moulded polyethylene water storage tanks triple layered white (cylindrical vertical with closed top) hoisted and fixed in position and including 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plasttic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/2.0mm-455gms/40-690gms) including dismantling of water tanks complete all as specified and directed. |
| 30 | All as per item No. 29.00 above but 500Ltr complete all as specified and directed. |
| 31 | Mirror polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. Please Enable Macros to View BoQ information |
