|
| 1 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level.In all types soils/ saturated soil such as moorum, sand , sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 2 | Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 Qty. Same as Above |
| 3 | Random rubble dry stone Kharanja (soling) under floor. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:3:6 (1 Cement : 3 fine/ coarse sand : 6 graded stone aggregate 40 mm nominal size). |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 7 | Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars |
| 8 | Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar1:4 (1 cement : 4 fine/ coarse sand) |
| 9 | Supply & fixing or equivelent white ashlar 1.80 M (6' span) finished |
| 10 | Stone Work (machine cut edge) for Wall cladding veneering work upto 10 m height with 30 mm thick base stone and 20 mm thick embossedcarving work on base stone (Total 50 mm thick stone shall be use for cladding work) as per approved and backing filled with a grout of 20 mm thick cement morter 1:3 (1 cement :3 course sand) including pointing in white cement morter 1:2 (1 white cement :2 stone dust) with an admixture of pigment matching the stone shade. Exposed face machine cut White/pink Jodhpur sand stone & Carving as per drawings andEngineer-in-charge.(To be secured to the backing by means of cramps which shall be paid separately). |
| 11 | Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. White sand stone |
| 12 | P & F of IP-66 protected high power LED flood light system with extruded aluminium housing , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps supplied with pre wired cable of 1 mtr. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumen be maintained. Light output in red , green , blue, cool white or warm white colour as per engineers choice. Fixturesshall be CE compliance 100 Watt |
| 13 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR.16.0 Sq.mm 4 core |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer |
| 15 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securingadjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand) including making the necessary chases in stone andholes in walls wherever required |
| 16 | Supplying , fixing ,& Transporting Chattris made out of Jodhpur Stone including its base of size 1.20m*1.20m*0.10m , 4 Nos pillers (6\\"*6\\") , 4Nos mehrab fixed between pillers, 8 Nos. Todies, 4 Nos. Barsot support, 01 Barsot on top , 4 Nos. Chajjas 2\\" thick, Gumaj with kalash on top(height from base to kalash top should be 10 ft). All work as per shape, design, carving and proportions as per approved drawing. the fixingshall be done in white cement mortar 1;4 with pigment matching shade with stone . design shall be approved by the authority . All work shall bedone as per specification and satisfication of Engineer Incharge including all transportion , loading, unloading & fixing complete. Please Enable Macros to View BoQ information |
