|
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sum on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter all kind of soil (B-1.8) |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50m and all lift upto 1.5m, disposed earth to be levelled and neatly dressed: All kinds of soil(B-1.6) |
| 3 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).(B-3.2.6) |
| 4 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand)(B-6.1.6) |
| 5 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.1:1.5:3 (1 cement : 1.5 :coarse sand : 3 graded stone aggregate 20 mm nominal size).(B-4.1) |
| 6 | B-5/5.15.2 Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 7 | \\"Brick work with clay flyash F.P.S. brick (IS 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : Cement mortar 1 : 6 (1 cement : 6 coarse sand)Add extra for Square or Rectangular Pillars in Superstructre brick work up to five storey Upto 45 cm length and two corners are free(B-5.15.2+5.3.2)\\" |
| 8 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). B-3.2.2 |
| 9 | Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix (B-4.2) |
| 10 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. Up to plinth level.(B-4.9) |
| 11 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for s/S upto floor three level for : Columns, pillars, posts and struts etc. (B-4.10.3) |
| 12 | Providing & fixing precast cement concrete coping 1 : 2: 4 mix 50mm thick complete as per specification B-3.8 |
| 13 | (B-18/4.13.3) Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically treating bars (conforming of relevant IS code). |
| 14 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.50 m height in R.S joist flats, tees, angles and channels.: (B-9.2) |
| 15 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide(B-9.8) |
| 16 | Add or deduct for each wire line over basic item + extra for using galavanized barbed wire instgrad of black barbed wire+ add extra if barbed wire fencing is done on wall upto height of 3.00 mtr (B-9.33+9.35+9.35.1) |
| 17 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished 20mm thick.(B-12.3.2) |
| 18 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joints etc. complete fine finished 12mm thick.(B-12.3.3) |
| 19 | B-12/12.19 Making grooves as per design in plaster 10mm to 20mm wide. |
| 20 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied@ 2.20 kg/ 10 sqm ).(B-12.42) |
| 21 | Colour washing of all shades to give an even shade incl all scaffolding:New work(two or more coats) with a base coat of white washing with lime. (B-12.35.1) |
| 22 | Painting with enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work.(B-12.46.1) |
| 23 | P & F rigid PVC pipe (IS: 4985 mark ) class II/( 4 Kg./Sq. cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia (S-3.16.3) |
| 24 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : 900 mm dia Internal )B-3.8.11) |
| 25 | PWD Unified Road BSR 2025-26 Granular Sub-base with Well Graded Material (Table 400-1) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. Grading-III Material R-4.1(iii) Please Enable Macros to View BoQ information |
