|
| 1 | Item No.1:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec. No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02) |
| 2 | Item No.2:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No. As directed by Engineer in charge. (SSR 22-23 It.No.21.40 ) |
| 3 | Item No.3:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01) |
| 4 | Item No.4:-Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) Additional Spec. No.Bd-E-8 (SSR 22-23 It.No.11.31 ) |
| 5 | Item No.5:-Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. Additional Spec. No.BR.35 Page Number 134 (SSR 22-23 It.No.14.01 ) |
| 6 | Item No.6:-Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 22-23 It.No.6.36 ) |
| 7 | Item No.7: Charges for testing of material in vigilance and quality control laboratory for concrete compressive strength of C.C. Cube ( Set of 3 cubes) Rate as per SSR 2022-23 Sr.No.19 Page No.3 |
| 8 | Item No.8: Royalty charges b) For all other Minerals= Royalty + surcharge (2%) = 211.95 + 4.23 = 216.18 per cum. as per SSR 2022-23 Section V Page No.3 Please Enable Macros to View BoQ information |
