|
| 1 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. (By Mechanical Means) a) Upto 1.50 metre lift Normal Rate |
| 2 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. (By Mechanical Means) b) 1.50m to 3.00m lift, Add 10% |
| 3 | Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. (By Mechanical Means) c) 3.00m to 4.50m lift, Add 20% |
| 4 | Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthen bunds etcetera as may be necessary for foundation and other parts of the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etcetera complete. (prior approval of Superintending Engineer will be necessary) |
| 5 | Providing soling using 80 mili metre size trap metal in 15 centi metre layer including filling voids with Crushed sand/grit, ramming, watering etcetera complete. |
| 6 | Providing and laying in situ / ready mix / ready mix M-15 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artificial sand) |
| 7 | Providing and laying in situ / ready mix controlled grade of M-30 of trap /granite /quartzite /gneiss metal for Reinforced Cement Concrete works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine aggregates of required specifications (VSI sand finely washed etcetera ), excluding reinforcement) |
| 8 | Providing and filling sand in foundation trenches / below Raft as per drawing and technical specifications etcetera complete. (Coarse Sand and Gravel ) |
| 9 | Prividing and fixing pressure relief pipes of 110 mili metre diametre of Poly Venyle Chloride as per drawing for Reinforced Cement Concrete Raft, galaries returns, abutments, wing wall etcetera complete. |
| 10 | Providing and laying in situ / ready mix M-30 controlled reinforced cement concrete of trap metal for raft slab including \\"V\\" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etcetera complete. concrete batch mix plant / pan mixer with fine agreegates of required specifications (VSI sand finely washed etcetera ) etcetera complete. (excluding reinforcement). a) Reinforced Cement Concrete Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer) . |
| 11 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 Kilogram each complete as per drawings and Technical specifications etcetera complete. (boulder laid without wire crates) |
| 12 | Providing and laying in situ / ready mix M-25 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etcetera including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortor 1:3 etcetera complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in followinh manners |
| 13 | Providing and laying in situ / ready mix M-30 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etcetera including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in cement mortor 1:3 etcetera complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in followinh manners. |
| 14 | Providing and laying in situ / ready mix controlled M-30 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in Cement mortor 1:3 and curing etcetera complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 15 | Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab etcetera including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etcetera complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 16 | Providing and laying in situ / ready mix M-30 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of box returns including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 17 | Providing and laying weep holes of 100 mili metre diametre Poly Venyle Chloride pipes as per drawing for abutment returns, return walls etcetera Complete. |
| 18 | Providing, cutting, bending, hooking, tying and laying in position Thermo Mechanical Treated (TMT) FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings etcetera complete. |
| 19 | Providing and laying in situ / ready mix M-30 Reinforced Cement Concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work of ballast walls and kerbs including scaffolding, compaction, formwork finishing and curing etcetera complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 20 | Providing Reinforced Cement Concrete railing of cast in situ / ready mix Reinforced Cement Concrete posts with M-20 Cement Concrete of trap/ granite/ quartzite/ gneiss metal for horizontal and vertical members as per detailed drawings including reinforcement, scaffolding, centering, formwork, compaction, finishing and curing with watering chemical compound etcetera complete. (fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 21 | Providing and laying cement concrete wearing coat M-30 grade with batch mix type / concrete mixer with SCADA including reinforcement as per drawings and technical specifications etcetera complete with fine agreegates of required specifications (VSI sand finely washed etcetera ) |
| 22 | Providing expansion joints with 25 mili metre thick bituminous pad as per detailed drawings etcetera complete. |
| 23 | Providing tar paper bearing including laying in proper position etcetera complete. |
| 24 | Providing vent holes 100 mili metre diameter Galvanised Iron pipe in the slab and wearing course with iron grill at the top and Galvanised Iron pipe at bottom as per drawing etcetera complete. |
| 25 | Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etcetera complete. (by granular material) |
| 26 | Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etcetera complete. |
| 27 | Providing cast in situ / ready mix M-15 grade cement concrete for head walls of Cross Drainage Work / retaining walls etcetera including necessary form work, compaction, finishing and curing etcetera complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine aggregates of required specifications (Natural sand/ VSI sand finely washed etcetera ), cement 4.05 bags/Cubic Metre) |
| 28 | Providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mili metre with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etcetera complete. |
| 29 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 Metre including removal and disposal of top organic soil not exceeding 150 mili metre in thickness. |
| 30 | Excavation for catch / side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 31 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 metre including all lifts, laying in layers of 20 centi metre to 30 centi metre thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etcetera complete ( Material obtained from Other sources) |
| 32 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at Optimum Moisture Content, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material |
| 33 | Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mili metre,, cement content not to be less than 150 Kilogram/ Cubic Metre, Optimum Moisture Content (OMC)to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete. |
| 34 | Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet Confirming to Indian Standard 3395 : 1997 below concrete pavement including all materials and labour complete. |
| 35 | Providing and laying in-situ M-40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (Natural Sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6 metre X 0.6 metre centre to centre, admeasuring 80 mili metre at bottom and 40 mili metre at top with depth of 75 mili metre and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. |
| 36 | Providing and fixing in position Thermo Mechanical Treated (TMT) FE 500, 32 mili metre diametre dowel bars precoated with anticorrosive epoxy paint of required diametre 60 centi metre Long and at 30.00 centi metre centre to centre and wherever directed including handling, straightening, necessary cutting supported by Thermo Mechanical Treated (TMT) FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etcetera complete. |
| 37 | Providing and fixing in position Thermo Mechanical Treated (TMT) FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mili metre diametre 70 centi metre long and at 30.00 centi metre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of Thermo Mechanical Treated (TMT) FE 500, chairs with proper alignment etcetera complete. |
| 38 | Cutting transverse contraction joints 3 to 4 mili metre wide and depth 60 mili metre .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etcetera complete including subsequent widening of the groove 8 to 10 mili metre wide at top having depth of 15 mili metre as directed by Engineer incharge. |
| 39 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 40 | Spreading hard murum/ soft murum/ gravel or kankar for side width complete |
| 41 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etcetera complete. |
| 42 | Providing dry rubble stone pitching 23 centi metre (about 9 ) thick including all material, quarry spalls, labour etcetera complete. |
| 43 | Providing and fixing stream lined M-20 grade Reinforced Cement Concrete guard stone including mild steel bar reinforcement etcetera complete. |
| 44 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etcetera', having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mili metre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etcetera with approved colour shade paint complete, on Mild Steelangle of size 35 x 35 x 3 mili metre frame with properly cross braced Mild Steel angles of size 35 mili metrex35 mili metrex3 mili metre duly painted including Two Mild Steel angle iron posts of size 65 mili metre x 65 mili metre x 6 mili metre, 3.65 meter long painted with alternate black and white bands of 25 Centi Metre width including all fixtures etceteraand fixing the boards in 1:4:8 concrete block of size 60 Centi Metre x 60 Centi Metre x 75 Centi Metre including, excavation, refilling, transportation, and labour etcetera complete. |
| 45 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 Metres, stacking serviceable and unserviceable materials separately etcetera complete. |
| 46 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 Cubic Metre in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 Metres, stacking serviceable and unserviceable materials separately etcetera complete. |
| 47 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 1000 mili metre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etcetera complete. |
| 48 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means - Grading II (Using Screening Type B (11.2 mm) Aggregate) Please Enable Macros to View BoQ information |
