|
| 1 | Item No.1:- Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). |
| 2 | Item No.2:- Supplying soft murum at the road site, including conveying and stacking complete. |
| 3 | Item No.3:- Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . |
| 4 | Item No.4:- Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 5 | Item No.5:- Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. includingnecessary, labour, materials and artificial watering complete. |
| 6 | Item No.6:- Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. ofapproved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 7 | Item No.7:- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI gradefinely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported tosite with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete. |
| 8 | Item No.8:- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liabilityperiod etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross bracedM.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width includingall fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, andlabour etc complete. Spec. No. As directed by Engineer in Charge |
| 9 | Item No.9: Charges for testing of material in vigilance and quality control laborator for |
| 10 | Item No.10: Charges for testing of material in vigilance and quality control laborator for |
| 11 | Item No.11: Royalty charges b) For all other Minerals Please Enable Macros to View BoQ information |
