|
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out soft loose soil, complete all as specified and directed. |
| 2 | Excavation in trenches not exc 1.5m wide & n. exc 1.5m in depth for foundation etc and getting out in soft soil soll, complete all as specified and directed. |
| 3 | Excavation in trenches not exc 1.5m wide & n. exc 1.5m in depth for foundation etc and getting out in soft disintigrated rock, complete all as specified and directed. |
| 4 | M&L Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed. |
| 5 | M&L Brick work with sub class ‘B’ old sized bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 6 | M&L Brick work with sub class ‘B’ old sized bricks, in half brick built in cement mortar 1:4, complete all as specified and directed. |
| 7 | Returning filling in including spreading leveling watering and well ramming in layers not exc 25mm thick, complete all as specified and directed. |
| 8 | Removing excavation materials n.exc 5 km and depositing where directed a level n exc 1.50 km above the starting point, complete all as specified and directed. |
| 9 | M&L Damp proof course In cement concrete 1:2:4, type B-0 40mm thick to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed. |
| 10 | S&F Rolled mild steel in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, Tee, Angle, Channel or flats sections) including cleats and distance pieces using steel of grade Fe 290 (Gde E-165), complete all as specified and directed. |
| 11 | M&L for preparation of new untreated steel surface of any description exc 10cm width or girth applying two coats of black Japan paint over a coat of red oxide primer, complete all as specified and directed. |
| 12 | M&L for Pre- painted galvalume aluminum zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 13 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS holdfast/lugs/SSdashfasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). |
| 14 | S&f A Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 15 | S&F 200 mm aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and shiding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed. |
| 16 | S/F 100 mm butt hinges, medium weight, extruded aluminium alloy with galvanised mild steel hinge type B-22, complete all as specified and directed. |
| 17 | S&F aluminium, anodized 200mm long barrel tower bolts of extruded section, complete all as specified and directed. |
| 18 | S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 19 | S & F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm, complete all as specified and directed. Please Enable Macros to View BoQ information |
